scholarly journals Comparison and analyses of a variable span-morphing of the tapered wing with a varying sweep angle

2020 ◽  
Vol 124 (1278) ◽  
pp. 1146-1169
Author(s):  
M. Elelwi ◽  
M.A. Kuitche ◽  
R.M. Botez ◽  
T.M. Dao
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Original Position ◽  
Concept Design ◽  
Wing Design ◽  
Sweep Angle ◽  
Ansys Fluent ◽  
Fixed Part ◽  
Variable Span

ABSTRACTThis work presents a comparative study of design and development, in addition, of analyses of variable span morphing of the tapered wing (VSMTW) for the unmanned aerial vehicle (UAV). The proposed concept consists in the sliding of the inner section into the fixed part along the wing with varying the angle of the inner section inside the fixed part (parallel with the leading edge and the moving-wing axis is coincident to the fixed-wing axis) within two configurations. The wing design is based on a NACA 4412 aerofoil with the root chord of 0.675m and the tip chord of 0.367m for the fixed segment and 0.320m for the moving segment. Morphing wing analysis occurs at three selected locations that have been specified for extending and modifying span length by (25%, 50%, and 75%) of its original length to fulfill various flight mission requirements. The main objective of this paper is to compare the aerodynamic characteristics for several span lengths and sweep angles and to find their most efficient combinations. The wing is optimised for different velocities during all phases of flight (min speed, loiter, cruise, and max speed) which are 17, 34, 51, and 68m/s, respectively. The analyses are performed by computing forces (drag and lift) and moments at various altitudes, such as at the sea level, at 5,000 and 10,000ft. Two-dimensional aerodynamic analyses are carried out using XFLR5 code, and the ANSYS Fluent solver is used for investigating the flow field on the three-dimensional wing structure. It has been observed that a variable span morphing of tapered wing technology with a variable sweep angle can deliver up to 32.93% improved aerodynamic efficiency. This concept design can also be used for the aircraft roll motion technique instead of conventional control devices. Furthermore, the range flight mission increases up to 46.89% when the wing is placed at its full length compared to an original position. Finally, it has been concluded from this study that the wing design is more sensitive to the changing angle of the inner section and more efficient in terms of aerodynamic characteristics.

scholarly journals Fin sweep angle does not determine flapping propulsive performance

2020 ◽  
Author(s):  
Andhini N. Zurman-Nasution ◽  
Bharathram Ganapathisubramani ◽  
Gabriel D. Weymouth
Keyword(s):  
Correlation Coefficient ◽  
Large Range ◽  
Three Dimensional ◽  
Leading Edge ◽  
Potential Sweep ◽  
Sweep Angle ◽  
Propulsive Performance ◽  
Maximum Angle ◽  
And Robotics ◽  
Three Dimensional Simulations

The importance of the leading-edge sweep angle of propulsive surfaces used by unsteady swimming and flying animals has been an issue of debate for many years, spurring studies in biology, engineering, and robotics with mixed conclusions. In this work we provide results from an extensive set of three-dimensional simulations of finite foils undergoing tail-like (pitch-heave) and flipper-like (twist-roll) kinematics for a range of sweep angles while carefully controlling all other parameters. No significant change in force and power is observed for tail-like motions as the sweep angle increases, with a corresponding efficiency drop of only ≈ 2%. Similar findings are seen in flipper-like motion and the overall correlation coefficient between sweep angle and propulsive performance is 0.1-6.7%. This leads to a conclusion that fish tails or mammal flukes can have a large range of potential sweep angles without significant negative propulsive impact. A similar conclusion applies to flippers; although there is a slight benefit to avoid large sweep angles for flippers, this could be easily compensated by adjusting other hydrodynamics parameters such as flapping frequency, amplitude and maximum angle of attack to gain higher thrust and efficiency.

scholarly journals NUMERICAL SIMULATION OF AIRFLOW AROUND VEHICLE MODELS

2018 ◽  
Vol 56 (3) ◽  
pp. 370
Author(s):  
Nguyen Van Thang ◽  
Ha Tien Vinh ◽  
Bui Dinh Tri ◽  
Nguyen Duy Trong
Keyword(s):  
Numerical Simulation ◽  
Kinetic Energy ◽  
Three Dimensional ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Forces ◽  
Dissipation Energy ◽  
Ansys Fluent ◽  
Car Model ◽  
Airflow Field ◽  
Fluent Software

This article carries out the numerical simulation of airflow over three dimensional car models using ANSYS Fluent software. The calculations have been performed by using realizable k-e turbulence model. The external airflow field of the simplified BMV M6 model with or without a wing is simulated. Several aerodynamic characteristics such as pressure distribution, velocity contours, velocity vectors, streamlines, turbulence kinetic energy and turbulence dissipation energy are analyzed in this study. The aerodynamic forces acting on the car model is calculated and compared with other authors.

Optimization of Aerodynamic Parameters of Cropped Delta Wing with Fence at Sonic Mach Number

2019 ◽  
Vol 16 (2) ◽  
pp. 403-409
Author(s):  
M. P. Arun ◽  
M. Satheesh ◽  
Edwin Raja J. Dhas
Keyword(s):  
Shock Wave ◽  
Boundary Condition ◽  
Mach Number ◽  
Sound Speed ◽  
Delta Wing ◽  
Leading Edge ◽  
Supersonic Speed ◽  
Sweep Angle ◽  
Ansys Fluent ◽  
Aerodynamic Parameters

Manufacturing and maintaining different aircraft fleet leads to various purposes, which consumes more money as well as man power. Solution to this, nations that are leading in the field of aeronautics are performing much research and development works on new aircraft designs that could do the operations those were done by varied aircrafts. The foremost benefit of this delta wing is, along the huge rearward sweep angle, the wing’s leading edge would not contact the boundary of shock wave. Further, the boundary is produced at the fuselage nose due to the speed of aircraft approaches and also goes beyond the transonic to supersonic speed. Further, rearward sweep angle greatly worse the airspeed: wings under normal condition to leading edge, so permits the aircraft to fly at great transonic, subsonic, or supersonic speed, whereas the over wing speed is kept to minimal range than that of the sound speed. The cropped delta wing with fence has analysed in three cases: Fences at 3/4th distance from the centre, with fences at half distance from the centre and with fences at the centre. Further, the delta wing that cropped is exported to ANSYS FLUENT V14.0 software and analysed by making the boundary condition settings like sonic Mach number of flow over wing along with the angle of attack.

Kinematic Analysis of 3-D Swept Shock Surfaces in Axial Flow Compressors

2000 ◽  
Vol 123 (3) ◽  
pp. 490-500 ◽  
Author(s):  
Peng Shan
Keyword(s):  
Three Dimensional ◽  
Axial Flow ◽  
Leading Edge ◽  
Research Field ◽  
High Loading ◽  
Kinematic Characteristic ◽  
Sweep Angle ◽  
Quantitative Classification ◽  
Axial Flow Compressors ◽  
Blade Leading Edge

This paper is part II of a comprehensive study on the blade leading edge sweep/bend of supersonic and transonic axial compressors. The paper explores and analyzes the kinematic characteristic variables of three-dimensional (3-D) swept shock surfaces. In the research field studying the sweep aerodynamics of axial flow compressors and fans, many types of high loading swept blades are under intensive study. So, in both direct and inverse design methods and experimental validations, an accurate grasp of the sweep characteristic of the blade’s 3-D swept shock surface becomes of more concern than before. Associated with relevant blading variables, this paper studies the forward and zero and backward sweeps of shock surfaces, defines and resolves every kind of useful sweep angle, obtains dimensionless sweep similarity factors, suggests a kind of method for the quantitative classification of 3-D shock structures, and proposes the principle of 3-D shock structure measurements. Two rotor blade leading edge shock surfaces from two high loading single stage fans are analyzed and contrasted. This study is the foundation of the kinematic design of swept shock surfaces.

scholarly journals Unsteady Aerodynamic Characteristics Simulations of Rotor Airfoil under Oscillating Freestream Velocity

2020 ◽  
Vol 10 (5) ◽  
pp. 1822
Author(s):  
Qing Wang ◽  
Qijun Zhao
Keyword(s):  
Three Dimensional ◽  
Grid Method ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Critical Value ◽  
Dynamic Stall ◽  
Navier Stokes ◽  
Freestream Velocity ◽  
Unsteady Aerodynamic ◽  
Edge Vortex

The dynamic stall characteristics of rotor airfoil are researched by employing unsteady Reynolds-Averaged Navier-Stokes (RANS) method under oscillating freestream velocity conditions. In order to simulate the oscillating freestream velocity of airfoil under dynamic stall conditions, the moving-embedded grid method is employed to simulate the oscillating velocity. By comparing the simulated dynamic stall characteristics of two-dimensional airfoil and three-dimensional rotor, it is indicated that the dynamic stall characteristics of airfoil under oscillating freestream velocity reflect the actual dynamic stall characteristics of rotor airfoil in forward flight more accurately. By comparing the simulated results of OA209 airfoil under coupled freestream velocity/pitching oscillation conditions, it is indicated that the dynamic stall characteristics of airfoil associate with the critical value of Cp peaks (i.e., the dynamic stall characteristics of OA209 airfoil would be enhanced when the maximum negative pressure is larger than −1.08, and suppressed when this value is smaller than −1.08). By comparing the characteristics of vortices under different oscillating velocities, it indicates that the dissipation rate of leading edge vortex presents as exponent characteristics, and it is not sensitive to different oscillating velocities.

A scaling for vortex formation on swept and unswept pitching wings

2017 ◽  
Vol 832 ◽  
pp. 697-720 ◽  
Author(s):  
Kyohei Onoue ◽  
Kenneth S. Breuer
Keyword(s):  
Control Volume ◽  
Vortex Formation ◽  
Fluid Motion ◽  
Three Dimensional ◽  
Leading Edge ◽  
Sweep Angle ◽  
Reduced Frequency ◽  
Vortex Formation Time ◽  
The Stability ◽  
Vorticity Transport

We examine the dynamics of the leading-edge vortex (LEV) on a rapidly pitching plate with the aim of elucidating the underlying flow physics that dictates the stability and circulation of the LEV. A wide variety of flow conditions is considered in the present study by systematically varying the leading-edge sweep angle ($\unicode[STIX]{x1D6EC}=0^{\circ }$, $11.3^{\circ }$, $16.7^{\circ }$) and the reduced frequency ($f^{\ast }=0.064{-}0.151$), while keeping the pitching amplitude and the Reynolds number fixed. Tomographic particle image velocimetry is used to characterise the three-dimensional fluid motion inside the vortex core and its relation to the LEV stability and growth. A series of control volume analyses are performed to quantify the relative importance of the vorticity transport phenomena taking place inside the LEV to the overall vortex development. We show that, near the wing apex where tip effects can be neglected, the vortex develops in a nominally two-dimensional manner, despite the presence of inherently three-dimensional vortex dynamics such as vortex stretching and compression. Furthermore, we demonstrate that the vortex formation time and circulation growth are well-described by the principles of optimal vortex formation number, and that the occurrence of vortex shedding is dictated by the relative energetics of the feeding shear layer and the resulting vortex.

scholarly journals Effect of Leading-Edge Bulges on Aerodynamic Characteristics of Bionic Wingsail

2021 ◽  
Author(s):  
Chen Li ◽  
Peiting Sun ◽  
Hongming Wang
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Suction Surface ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Extension Direction ◽  
Lift And Drag

The leading-edge bulges along the extension direction are designed on the marine wingsail. The height and the spanwise wavelength of the protuberances are 0.1c and 0.25c, respectively. At Reynolds number Re=5×105, the Reynolds Averaged Navier-Stokes equations are applied to the simulation of the wingsail with the bulges thanks to ANSYS Fluent finite-volume solver based on the SST K-ω models. The grid independence analysis is carried out with the lift and drag coefficients of the wingsail at AOA = 8° and AOA=20°. The results show that while the efficiency of the wingsail is reduced by devising the leading-edge bulges before stall, the bulges help to improve the lift coefficient of the wingsail when stalling. At AOA=22° under the action of the leading-edge tubercles, a convective vortex is formed on the suction surface of the modified wingsail, which reduces the flow loss. So the bulges of the wingsail can delay the stall.

scholarly journals Boundary Layer Control of Airfoil using Rotating Cylinder

2020 ◽  
Vol 8 (6) ◽  
pp. 4742-4750
Keyword(s):  
Leading Edge ◽  
Rotating Cylinder ◽  
Aerodynamic Characteristics ◽  
Favourable Result ◽  
Ansys Fluent ◽  
High Lift ◽  
Freestream Velocity ◽  
Aerodynamic Efficiency ◽  
Two Parameters ◽  
Layer Control

The requirement for improving the aerodynamic efficiency and delaying the formation of stall over the wing has been of prime importance within the field of aviation. The main objective of the project is to further improve upon these two parameters. The configuration used for analysis consists of a NACA 2412 airfoil of chord length 0.982m with a 64mm cylinder at the leading edge. Analysis is completed using ANSYS Fluent, with a freestream velocity of 10m/s. The aerodynamic characteristics of three configuration bare airfoil, Airfoil with static cylinder and Airfoil with rotating cylinder are tabulated and plotted. The comparison is then followed by pressure and velocity contours to visualize the flow over each configuration. The rotating cylinder configuration shows a improvement in the aerodynamics characteristics. The rotating cylinder configuration gives the most favourable result. This study has a potential application in high lift devices and can be used as stall delaying device

scholarly journals A PARAMETRIC STUDY ON CONTROL OF FLOW SEPARATION OVER AN AIRFOIL IN INCOMPRESSIBLE REGIME

2018 ◽  
Vol 19 (1) ◽  
pp. 270-288
Author(s):  
L Prabhu ◽  
J Srinivas
Keyword(s):  
Flow Separation ◽  
Passive Control ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Aerodynamic Characteristics ◽  
Computational Effort ◽  
Gradient Field ◽  
Control Procedure ◽  
Ansys Fluent ◽  
Suction Velocity

This paper presents the effects of airfoil geometry on flow separation behavior and obtains the transition patterns at a specific angle of attack. A strong adverse pressure gradient field is observed at the leading edge of the airfoil, and it results in a flow detachment. Leading edge flow separation is studied along with the variation of skin friction coefficient over the airfoil. Novelty in the approach is the development of a hybrid control scheme to delay the flow separation with blowing/suction of air (termed active control) over the airfoil together with the tapping of flow from the pressure side as in a classical passive control procedure. The active controller delays the flow separation, while the passive controller is used to reduce the drag coefficient significantly and increases the total performance of an airfoil. The effectiveness of these controls is examined by varying the control parameters including blowing/suction velocity, the position of the slot in terms of percentage of chord and size of the slot. All the numerical simulations are carried out using ANSYS-Fluent software. A surrogate model is also developed to predict the aerodynamic characteristics conveniently without much computational effort. The outcome of this study reveals that the blowing/suction velocity has a higher influence in delaying the flow separation. ABSTRAK: Kertas ini membentangkan tentang kesan geometri aerofoil pada perubahan pemisah aliran udara dan memperoleh bentuk peralihan pada darjah yang tepat. Terdapat tekanan kuat yang tidak sesuai pada kawasan kecerunan di hujung hadapan permukaan aerofoil, dan ini menyebabkan aliran udara terpisah. Pemisah aliran udara pada hujung hadapan ini dikaji bersama koefisien geseran pada permukaan aerofoil. Pendekatan baru pada kaedah ini adalah berkaitan pembangunan skim kawalan hibrid bagi melengahkan aliran pemisah udara melalui tiupan/sedutan udara (kawalan aktif) ke atas aerofoil bersama ketukan pada aliran dari tepi tekanan seperti mana prosedur klasik kawalan pasif. Kawalan aktif ini melengahkan aliran pemisah udara, sebaliknya kawalan pasif telah digunakan bagi mengurangkan koefisien penangguhan dengan ketara dan menambahkan jumlah prestasi aerofoil. Keberhasilan kawalan-kawalan ini dikaji dengan mengubah parameter kawalan termasuk kelajuan tiupan/sedutan udara, posisi slot berdasarkan peratusan garis temu dan saiz slot. Semua simulasi-simulasi numerikal ini dijalankan menggunakan perisian Ansys-Fluent. Model pengganti turut dibangunkan untuk menjangka ciri-ciri aero-dinamik dengan mudah tanpa usaha pengiraan yang banyak. Keputusan kajian ini mendedahkan tentang kelajuan tiupan/sedutan udara berpengaruh besar dalam melambatkan pemisahan aliran udara.

An experimental parametric study on planar sheared wings tip devices for low-to-moderate aspect ratio wings

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lourelay Moreira dos Santos ◽  
Guilherme Ferreira Gomes ◽  
Rogerio F. Coimbra
Keyword(s):  
Wind Tunnel ◽  
Aspect Ratio ◽  
Parametric Study ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Sweep Angle ◽  
Wind Tunnel Tests ◽  
Content Type ◽  
Wing Tips ◽  
Wing Tip

Purpose The purpose of this study is to investigate the aerodynamic characteristics of a low-to-moderate-aspect-ratio, tapered, untwisted, unswept wing, equipped of sheared wing tips. Design/methodology/approach In this work, wind tunnel tests were made to study the influence in aerodynamic characteristics over a typical low-to-moderate-aspect-ratio wing of a general aviation aircraft, equipped with sheared – swept and tapered planar – wing tips. An experimental parametric study of different wing tips was tested. Variations in its leading and trailing edge sweep angle as well as variations in wing tip taper ratio were considered. Sheared wing tips modify the flow pattern in the outboard region of the wing producing a vortex flow at the wing tip leading edge, enhancing lift at high angles of attack. Findings The induced drag is responsible for nearly 50% of aircraft total drag and can be reduced through modifications to the wing tip. Some wing tip models present complex geometries and many of them present benefits in particular flight conditions. Results have demonstrated that sweeping the wing tip leading edge between 60 and 65 degrees offers an increment in wing aerodynamic efficiency, especially at high lift conditions. However, results have demonstrated that moderate wing tip taper ratio (0.50) has better aerodynamic benefits than highly tapered wing tips (from 0.25 to 0.15), even with little less wing tip leading edge sweep angle (from 57 to 62 degrees). The moderate wing tip taper ratio (0.50) offers more wing area and wing span than the wings with highly tapered wing tips, for the same aspect ratio wing. Originality/value Although many studies have been reported on the aerodynamics of wing tips, most of them presented complex non-planar geometries and were developed for cruise flight in high subsonic regime (low lift coefficient). In this work, an exploration and parametric study through wind tunnel tests were made, to evaluate the influence in aerodynamic characteristics of a low-to-moderate-aspect-ratio, tapered, untwisted, unswept wing, equipped of sheared wing tips (wing tips highly swept and tapered).

Sign in / Sign up

Export Citation Format

Share Document