Fabrication of low cost integrated micro-capillary electrophoresis analytical chip for chemical analysis

2008 ◽  
Vol 128 (2) ◽  
pp. 422-426 ◽  
Author(s):  
G.S. Virdi ◽  
R.K. Chutani ◽  
P.K. Rao ◽  
Sushil Kumar
Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  

Abstract Algoma AR225 is a carbon steel developed primarily to supply a low-cost material for high-abrasion applications. It is furnished in the form of as-rolled plate with a relatively high carbon content (0.35-0.45%). AR-225 is sold on the basis of chemical analysis only; the number 225 signifies the approximate Brinell hardness. On thicknesses one-half inch and over, this Brinell value may be lower than 225 because of higher finishing temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-138. Producer or source: Algoma Steel Corporation Ltd.


Author(s):  
Jane Lovegrove

Urinalysis simply means analysis of urine. It is an easily performed investigation that can detect a wide variety of abnormalities within a few minutes at low cost. Urinalysis is an investigation which all nurses should be competent to perform and is identified by the NMC (2007) as being an example of an essential skill nurse students should be competent to perform before entering their branch programme. Urinalysis may be performed in a wide variety of clinical settings. It should be performed on every patient entering the acute care setting. Additionally, the National Confidential Enquiry into Patient Outcome and Death (NCEPOD (2009), stresses the need for urinalysis to be performed on all emergency admissions to an acute hospital. It may also be performed in outpatient and general practice clinics, and community areas. To obtain the most accurate information from the test, students need to know how to obtain and assess a sample of urine and be aware of factors that may influence the reliability of the investigation. Urine may be tested in three different ways. ● Macroscopic urinalysis, ● Microscopic urinalysis, ● Chemical analysis. Macroscopic and chemical analysis are the investigations performed in the clinical setting which may be tested by OSCE. Microscopic investigation requires samples to be sent to a laboratory. Macroscopic analysis is the analysis of the urine by the naked eye. Chemical analysis may be performed by use of a plastic diagnostic reagent strip or ‘dipstick’ which contains small pads of chemicals which react to substances that may be found in urine. For purposes of testing urine at random, clients are asked to urinate into a clean but not sterile dry container with no precautions regarding contamination. In females in particular this may result in samples being contaminated by vaginal fluids, such as blood or mucus. Due to the risk of contamination a mid-stream specimen of urine may be required if an abnormality is found in a random sample. A mid-stream specimen requires cleaning of the external urethral meatus prior to urination, passing the first half of the bladder contents into the lavatory, and passing the second part of the urine flow into a sterile container.


2020 ◽  
Vol 92 (20) ◽  
pp. 13683-13687 ◽  
Author(s):  
Brae V. Petersen ◽  
Luke Gallion ◽  
Nancy L. Allbritton

RSC Advances ◽  
2018 ◽  
Vol 8 (51) ◽  
pp. 29062-29070 ◽  
Author(s):  
Sonia Andrikaki ◽  
Katerina Govatsi ◽  
Spyros N. Yannopoulos ◽  
George A. Voyiatzis ◽  
Konstantinos S. Andrikopoulos

Simple, reproducible and low-cost SERS substrates for ultra-sensitive chemical analysis/quantification offered by thermal dewetting of thin metallic films.


2017 ◽  
Vol 91 ◽  
pp. 388-392 ◽  
Author(s):  
Jee Won Lee ◽  
Dohwan Lee ◽  
Yong Tae Kim ◽  
Eun Yeol Lee ◽  
Do Hyun Kim ◽  
...  

Science ◽  
1993 ◽  
Vol 261 (5123) ◽  
pp. 895-897 ◽  
Author(s):  
D. J. Harrison ◽  
K. Fluri ◽  
K. Seiler ◽  
Z. Fan ◽  
C. S. Effenhauser ◽  
...  

2016 ◽  
Vol 75 (2) ◽  
pp. 439-450 ◽  
Author(s):  
Asmaa Ali ◽  
Abdelkader Ahmed ◽  
Ali Gad

This study aims to investigate the ability of low cost ceramic membrane filtration in removing three common heavy metals namely; Pb2+, Cu2+, and Cd2+ from water media. The work includes manufacturing ceramic membranes with dimensions of 15 by 15 cm and 2 cm thickness. The membranes were made from low cost materials of local clay mixed with different sawdust percentages of 0.5%, 2.0%, and 5.0%. The used clay was characterized by X-ray diffraction (XRD) and X-ray fluorescence analysis. Aqueous solutions of heavy metals were prepared in the laboratory and filtered through the ceramic membranes. The influence of the main parameters such as pH, initial driving pressure head, and concentration of heavy metals on their removal efficiency by ceramic membranes was investigated. Water samples were collected before and after the filtration process and their heavy metal concentrations were determined by chemical analysis. Moreover, a microstructural analysis using scanning electronic microscope (SEM) was performed on ceramic membranes before and after the filtration process. The chemical analysis results showed high removal efficiency up to 99% for the concerned heavy metals. SEM images approved these results by showing adsorbed metal ions on sides of the internal pores of the ceramic membranes.


Sign in / Sign up

Export Citation Format

Share Document