Anisotropic Nd–Fe–B nanocrystalline magnets processed by spark plasma sintering and in situ hot pressing of hydrogenation–decomposition–desorption–recombination powder

2009 ◽  
Vol 61 (10) ◽  
pp. 978-981 ◽  
Author(s):  
R. Gopalan ◽  
H. Sepehri-Amin ◽  
K. Suresh ◽  
T. Ohkubo ◽  
K. Hono ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Hot Pressing ◽  
Plasma Sintering ◽  
Spark Plasma

scholarly journals Microstructure and properties of nano-laminated Y3Si2C2 ceramics fabricated via in situ reaction by spark plasma sintering

2021 ◽  
Vol 10 (3) ◽  
pp. 578-586
Author(s):  
Lin-Kun Shi ◽  
Xiaobing Zhou ◽  
Jian-Qing Dai ◽  
Ke Chen ◽  
Zhengren Huang ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Atomic Scale ◽  
Max Phase ◽  
X Ray Diffraction ◽  
Selected Area Electron Diffraction ◽  
Plasma Sintering ◽  
Transmission Electron ◽  
Spark Plasma ◽  
Diffraction Patterns

AbstractA nano-laminated Y3Si2C2 ceramic material was successfully synthesized via an in situ reaction between YH2 and SiC using spark plasma sintering technology. A MAX phase-like ternary layered structure of Y3Si2C2 was observed at the atomic-scale by high resolution transmission electron microscopy. The lattice parameters calculated from both X-ray diffraction and selected area electron diffraction patterns are in good agreement with the reported theoretical results. The nano-laminated fracture of kink boundaries, delamination, and slipping were observed at the tip of the Vickers indents. The elastic modulus and Vickers hardness of Y3Si2C2 ceramics (with 5.5 wt% Y2O3) sintered at 1500 °C were 156 and 6.4 GPa, respectively. The corresponding values of thermal and electrical conductivity were 13.7 W·m-1·K-1 and 6.3×105 S·m-1, respectively.

Spark Plasma Sintering and Hot Pressing Sintering of Nanocrystalline WC-10CO-0.8VC

2007 ◽  
Vol 534-536 ◽  
pp. 1229-1232
Author(s):  
Li Hui Zhu ◽  
Guang Jie Shao ◽  
Yi Xiong Liu ◽  
Dave Siddle
Keyword(s):  
Relative Density ◽  
Spark Plasma Sintering ◽  
Hot Pressing ◽  
Nanocrystalline Powders ◽  
Microstructure And Properties ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Hot Pressing Sintering

WC-10Co-0.8VC nanocrystalline powders were sintered by spark plasma sintering (SPS) and hot pressing sintering (HPS), and the microstructure and properties were compared. Results show that, sintered at 1300°C, the sample prepared by SPS for only 3 minutes has higher density than that prepared by HPS for 60 minutes. SEM and SPM observation shows SPS at 1200°C has a more uniform and finer microstructure, and most of the WC grains are smaller than 100nm. It has a relative density of 95.1%, HV30 of 1887, and KIC of 11.5 MPam1/2. If a suitable sintering parameter is chosen, SPS is a promising consolidation technique to prepare nanocrystalline WC-10Co-0.8VC with improved properties.

Microstructure and Magnetic Properties of Hot-Pressed and Hot-Deformed Composite Magnets Produced by Spark Plasma Sintering Method

2011 ◽  
Vol 686 ◽  
pp. 740-744 ◽  
Author(s):  
Yi Long Ma ◽  
Deng Ming Chen ◽  
Qian Shen ◽  
Peng Jun Cao
Keyword(s):  
Magnetic Properties ◽  
Spark Plasma Sintering ◽  
Hot Pressing ◽  
Magnetic Energy ◽  
Pressing Temperature ◽  
Energy Product ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Energy Products ◽  
Fe Addition

Bulk isotropic and anisotropic Nd13.5Fe80.4Ga0.5B5.6 and Nd13.5Fe80.4Ga0.5B5.6/Fe magnets were synthesized by applying spark plasma sintering (SPS) technique. The effect of hot-pressing temperature on the magnetic properties of hot-pressed (HP) and hot-deformed (HD) magnets without additive and with 5% Fe addition was investigated. With increasing sintering temperature for HP magnets, the grain grew gradually. For HD magnets, the optimal magnetic properties could be obtained at hot-pressing temperature 680°C due to the development of desired c-axis texture and uniform microstructure, which resulted from the appropriate and uniform grain size in HP magnets. Fe addition could enhance remanence (Br) and magnetic energy products ((BH)m) of HP and HD magnets. However, the maximum magnetic energy product of HD magnets decreased when hot-pressing temperature was higher than 650°C.

scholarly journals B6O ceramic by in-situ reactive spark plasma sintering of a B2O3 and B powder mixture

2014 ◽  
Vol 122 (1425) ◽  
pp. 336-340 ◽  
Author(s):  
Ievgen SOLODKYI ◽  
Hanna BORODIANSKA ◽  
Ting ZHAO ◽  
Yoshio SAKKA ◽  
Petre BADICA ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Plasma Sintering ◽  
Spark Plasma

scholarly journals In-situ creep law determination for modeling Spark Plasma Sintering of TiAl 48-2-2 powder

2017 ◽  
Vol 86 ◽  
pp. 147-155 ◽  
Author(s):  
David Martins ◽  
Fanny Grumbach ◽  
Charles Manière ◽  
Pierre Sallot ◽  
Katia Mocellin ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Plasma Sintering ◽  
Spark Plasma
Sign in / Sign up

Export Citation Format

Share Document