β-Cyclodextrin functionalized coaxially electrospun poly(vinylidene fluoride) @ polystyrene membranes with higher mechanical performance for efficient removal of phenolphthalein

2019 ◽  
Vol 141 ◽  
pp. 100-111 ◽  
Author(s):  
Ning Gao ◽  
Jiale Yang ◽  
Yufei Wu ◽  
Jiangyu Yue ◽  
Guiyi Cao ◽  
...  
Keyword(s):  
Vinylidene Fluoride ◽  
Mechanical Performance ◽  
Efficient Removal ◽  
Poly Vinylidene Fluoride

scholarly journals Multiple-Step Melting/Irradiation: A Strategy to Fabricate Thermoplastic Polymers with Improved Mechanical Performance

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1812
Author(s):  
Jingxin Zhao ◽  
Jiayao Wang ◽  
Xiaojun Ding ◽  
Yu Gu ◽  
Yongjin Li ◽  
...  
Keyword(s):  
Crystal Structures ◽  
Vinylidene Fluoride ◽  
Mechanical Performance ◽  
Crosslinking Density ◽  
Nucleation Density ◽  
Thermoplastic Polymers ◽  
3 Dimensional ◽  
Dimensional Network ◽  
Poly Vinylidene Fluoride ◽  
Multiple Step

To fabricate thermoplastic polymers exhibiting improved ductility without the loss of strength, a novel multiple-step melting/irradiation (MUSMI) strategy was developed by taking poly(vinylidene fluoride)/triallyl isocyanate (PVDF/TAIC) as an example, in which alternate melting and irradiation were adopted and repeated for several times. The initial irradiation with a low dose produced some local crosslinked points (not 3-dimensional network). When the specimen was reheated above the melting temperature, they redistributed in the PVDF matrix, which is an efficient way to avoid the high crosslinking density at certain positions and the disappearance of thermoplastic properties. During the subsequent cooling process, the crosslinked domains in the thermoplastic polymer matrix is expected to play double roles in turning crystal structures for enhancing the ductility without reducing strength. On one hand, they can act as heterogeneous nucleation agents, resulting in higher nucleation density and smaller spherulites; on the other hand, the existence of crosslinked structures restricts the lamellar thickening, accounting for the thinner crystal lamellae. Both smaller spherulites and thinner lamellae contribute to better ductility. At the same time, these local crosslinked points enhance the connectivity of crystal structures (including lamellae and spherulites), which is beneficial to the improvement of strength. Based on the influence of local crosslinked points on the ductility and strength, thermoplastic PVDF with much higher elongation at break and comparable yielding stress (relative to the reference specimen upon strong irradiation only once) was prepared via MUSMI successfully.

scholarly journals Nanocomposite Polymer Electrolytes for Zinc and Magnesium Batteries: From Synthetic to Biopolymers

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4284
Author(s):  
María Fernanda Bósquez-Cáceres ◽  
Sandra Hidalgo-Bonilla ◽  
Vivian Morera Córdova ◽  
Rose M. Michell ◽  
Juan P. Tafur
Keyword(s):  
Polymer Electrolytes ◽  
Large Scale ◽  
Vinylidene Fluoride ◽  
Mechanical Performance ◽  
Rechargeable Batteries ◽  
Practical Applications ◽  
Nanocomposite Polymer ◽  
Multivalent Ions ◽  
Poly Vinylidene Fluoride ◽  
Nanocomposite Polymer Electrolytes

The diversification of current forms of energy storage and the reduction of fossil fuel consumption are issues of high importance for reducing environmental pollution. Zinc and magnesium are multivalent ions suitable for the development of environmentally friendly rechargeable batteries. Nanocomposite polymer electrolytes (NCPEs) are currently being researched as part of electrochemical devices because of the advantages of dispersed fillers. This article aims to review and compile the trends of different types of the latest NCPEs. It briefly summarizes the desirable properties the electrolytes should possess to be considered for later uses. The first section is devoted to NCPEs composed of poly(vinylidene Fluoride-co-Hexafluoropropylene). The second section centers its attention on discussing the electrolytes composed of poly(ethylene oxide). The third section reviews the studies of NCPEs based on different synthetic polymers. The fourth section discusses the results of electrolytes based on biopolymers. The addition of nanofillers improves both the mechanical performance and the ionic conductivity; key points to be explored in the production of batteries. These results set an essential path for upcoming studies in the field. These attempts need to be further developed to get practical applications for industry in large-scale polymer-based electrolyte batteries.

scholarly journals Electroactive γ-Phase, Enhanced Thermal and Mechanical Properties and High Ionic Conductivity Response of Poly (Vinylidene Fluoride)/Cellulose Nanocrystal Hybrid Nanocomposites

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 743
Author(s):  
Erlantz Lizundia ◽  
Ander Reizabal ◽  
Carlos M. Costa ◽  
Alberto Maceiras ◽  
Senentxu Lanceros-Méndez
Keyword(s):  
Ionic Conductivity ◽  
Vinylidene Fluoride ◽  
Mechanical Performance ◽  
Dielectric Behavior ◽  
Hybrid Nanocomposites ◽  
Thermal And Mechanical Properties ◽  
Oh Groups ◽  
Poly Vinylidene Fluoride ◽  
Relevant Role

Cellulose nanocrystals (CNCs) were incorporated into poly (vinylidene fluoride) (PVDF) to tailor the mechanical and dielectric properties of this electroactive polymer. PVDF/CNC nanocomposites with concentrations up to 15 wt.% were prepared by solvent-casting followed by quick vacuum drying in order to ensure the formation of the electroactive γ-phase. The changes induced by the presence of CNCs on the morphology of PVDF and its crystalline structure, thermal properties, mechanical performance and dielectric behavior are explored. The results suggest a relevant role of the CNC surface −OH groups, which interact with PVDF fluorine atoms. The real dielectric constant ε’ of nanocomposites at 200 Hz was found to increase by 3.6 times up to 47 for the 15 wt.% CNC nanocomposite due to an enhanced ionic conductivity provided by CNCs. The approach reported here in order to boost the formation of the γ-phase of PVDF upon the incorporation of CNCs serves to further develop cellulose-based multifunctional materials.

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

2020 ◽  
Vol 91 (3) ◽  
pp. 31301
Author(s):  
Nabil Chakhchaoui ◽  
Rida Farhan ◽  
Meriem Boutaldat ◽  
Marwane Rouway ◽  
Adil Eddiai ◽  
...  
Keyword(s):  
High Efficiency ◽  
Vinylidene Fluoride ◽  
Research Work ◽  
Research Area ◽  
Interfacial Interaction ◽  
Tetraethyl Orthosilicate ◽  
Poly Vinylidene Fluoride ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

Effect of Carbon Nanotubes on the Shape Memory Performance of Poly(vinylidene fluoride)/Acrylic Blends

2013 ◽  
Vol 30 (2) ◽  
pp. 134
Author(s):  
Hui FU ◽  
Jishan QIU ◽  
Ning CHONG ◽  
Yaqing WANG ◽  
Yuanyuan TIAN ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Shape Memory ◽  
Vinylidene Fluoride ◽  
Memory Performance ◽  
Poly Vinylidene Fluoride
Sign in / Sign up

Export Citation Format

Share Document