scholarly journals Measurement of local brittle fracture stress for dynamic crack propagation in steel

2016 ◽  
Vol 2 ◽  
pp. 395-402
Author(s):  
Fuminori Yanagimoto ◽  
Kazuki Shibanuma ◽  
Tomoya Kawabata ◽  
Katsuyuki Suzuki ◽  
Shuji Aihara
Keyword(s):  
Brittle Fracture ◽  
Crack Propagation ◽  
Fracture Stress ◽  
Dynamic Crack Propagation ◽  
Dynamic Crack

Dynamic crack propagation in matrix involving inclusions by a time-domain BEM

2012 ◽  
Vol 36 (5) ◽  
pp. 651-657 ◽  
Author(s):  
Jun Lei ◽  
Yue-Sheng Wang ◽  
Yifeng Huang ◽  
Qingsheng Yang ◽  
Chuanzeng Zhang
Keyword(s):  
Crack Propagation ◽  
Time Domain ◽  
Dynamic Crack Propagation ◽  
Dynamic Crack

Dynamic Crack Propagation in Single-Crystalline Silicon

1998 ◽  
Vol 539 ◽  
Author(s):  
T. Cramer ◽  
A. Wanner ◽  
P. Gumbsch
Keyword(s):  
Crack Propagation ◽  
Crystalline Silicon ◽  
Potential Drop ◽  
Tensile Tests ◽  
Terminal Velocity ◽  
Dynamic Crack Propagation ◽  
Dynamic Crack ◽  
Single Crystalline Silicon ◽  
Single Crystalline ◽  
Crack Propagation Velocity

AbstractTensile tests on notched plates of single-crystalline silicon were carried out at high overloads. Cracks were forced to propagate on {110} planes in a <110> direction. The dynamics of the fracture process was measured using the potential drop technique and correlated with the fracture surface morphology. Crack propagation velocity did not exceed a terminal velocity of v = 3800 m/s, which corresponds to 83%7 of the Rayleigh wave velocity vR. Specimens fractured at low stresses exhibited crystallographic cleavage whereas a transition from mirror-like smooth regions to rougher hackle zones was observed in case of the specimens fractured at high stresses. Inspection of the mirror zone at high magnification revealed a deviation of the {110} plane onto {111} crystallographic facets.

Cleavage Planes of Icosahedral Quasicrystals: A Molecular Dynamics Study

2003 ◽  
Vol 805 ◽  
Author(s):  
Frohmut Rösch ◽  
Christoph Rudhart ◽  
Peter Gumbsch ◽  
Hans-Rainer Trebin
Keyword(s):  
Molecular Dynamics ◽  
Brittle Fracture ◽  
Crack Propagation ◽  
Three Dimensional ◽  
Propagation Direction ◽  
Mode I ◽  
Dynamic Crack ◽  
Fracture Surfaces ◽  
Icosahedral Quasicrystals ◽  
Crack Tip Plasticity

ABSTRACTThe propagation of mode I cracks in a three-dimensional icosahedral model quasicrystal has been studied by molecular dynamics techniques. In particular, the dependence on the plane structure and the influence of clusters have been investigated. Crack propagation was simulated in planes perpendicular to five-, two- and pseudo-twofold axes of the binary icosahedral model.Brittle fracture without any crack tip plasticity is observed. The fracture surfaces turn out to be rough on the scale of the clusters. These are not strictly circumvented, but to some extent cut by the dynamic crack. However, compared to the flat seed cracks the clusters are intersected less frequently. Thus the roughness of the crack surfaces can be attributed to the clusters, whereas the constant average heights of the fracture surfaces reflect the plane structure of the quasicrystal. Furthermore a distinct anisotropy with respect to the in-plane propagation direction is found.

scholarly journals Dynamic crack propagation in a 2D elastic body. The out-of plane case

PAMM ◽  
2007 ◽  
Vol 7 (1) ◽  
pp. 1090801-1090802
Author(s):  
A.-M. Sändig ◽  
A. Lalegname ◽  
S. Nicaise
Keyword(s):  
Crack Propagation ◽  
Elastic Body ◽  
Dynamic Crack Propagation ◽  
Dynamic Crack ◽  
Plane Case ◽  
Out Of Plane

Dynamic Crack Propagation and Arrest in PWR Pressure Vessel Steel: Interpretation of Experiment With the X-FEM Method

2007 ◽  
Author(s):  
B. Prabel ◽  
S. Marie ◽  
A. Combescure
Keyword(s):  
Finite Element ◽  
Crack Propagation ◽  
Strain Rate ◽  
Thermal Shock ◽  
Crack Growth ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Crack Propagation ◽  
Dynamic Crack ◽  
Pressure Vessel Steel ◽  
Vessel Steel

In the frame of analysis of the pressure thermal shock in a PWR RVP and the associated R&D activities, some developments are performed at CEA on the dynamic brittle propagation and crack arrest. This paper presents a PhD work on the modeling of the dynamic brittle crack growth. For the analyses, an important experimental work is performed on different geometries using a French RPV ferritic steel: Compact Tension specimens with different thickness, isothermal rings under compression with different positions of the initial defect to study a mixed mode configuration, and a ring submitted to thermal shock. The first part of this paper details the test conditions and main results. To propose an accurate interpretation of the crack growth, a viscous-elastic-plastic dynamic model is used. The strain rate influence is taken into account based on Cowper-Symond’s law (characterization was made from Split Hopkinson Pressure Bar tests). To model the crack propagation in the Finite Element calculation, eXtended Finite Element Method (X-FEM) is used. The implementation of these specific elements in the CEA F.E. software CAST3M is described in the second part of this paper. This numerical technique avoids re-meshing, because the crack progress is directly incorporated in the degrees of freedom of the elements crossed by the crack. The last part of this paper compares the F.E. predictions to the experimental measurements using different criteria. In particular, we focused on a RKR (Ritchie-Knott-Rice) like criterion using a critical principal stress in the front of the crack tip during the dynamic crack extension. Critical stress is found to depend on crack speed, or equivalently on strain rate. Good results are reported concerning predictive simulations.

Sign in / Sign up

Export Citation Format

Share Document