High pressure ignition delay times of H2/CO mixture in carbon dioxide and argon diluent

2020 ◽  
Author(s):  
Miad Karimi ◽  
Bradley Ochs ◽  
Wenting Sun ◽  
Devesh Ranjan
Keyword(s):  
Carbon Dioxide ◽  
High Pressure ◽  
Ignition Delay ◽  
Ignition Delay Times ◽  
Delay Times

Ignition delay times of methane fuels at thrust chamber conditions in an ultra-high-pressure shock tube

2022 ◽  
Author(s):  
Michael Pierro ◽  
Andrew Laich ◽  
Justin J. Urso ◽  
Cory Kinney ◽  
Subith Vasu ◽  
...  
Keyword(s):  
High Pressure ◽  
Shock Tube ◽  
Ignition Delay ◽  
Pressure Shock ◽  
Thrust Chamber ◽  
Ultra High Pressure ◽  
Ignition Delay Times ◽  
Delay Times

Interpretation of Flow Reactor Based Ignition Delay Measurements

2009 ◽  
Author(s):  
David Beerer ◽  
Vincent McDonell ◽  
Scott Samuelsen ◽  
Leonard Angello
Keyword(s):  
High Pressure ◽  
Gas Turbine ◽  
Residence Time ◽  
Ignition Delay ◽  
Delay Time ◽  
Ignition Delay Time ◽  
Flow Reactor ◽  
Ignition Delay Times ◽  
Delay Times ◽  
Recirculation Zones

Compositional variation of global gas supplies is becoming a growing concern. Both the range and rate-of-change of this variation is expected to increase as global markets for Liquefied Natural Gas (LNG) continue to expand. Greater fuel composition variation poses increased operational risk to gas turbine engines employing lean premixed combustion systems. Information on ignition delay at high pressure and intermediate temperatures is valuable for lean premixed gas turbine design. In order to avoid autoignition of the fuel/air mixture within the premixer, the ignition delay time must be greater than the residence time. Evaluating the residence time is not a straight forward task because of the complex aerodynamics due to recirculation zones, separation regions, and boundary layers effects which may create regions where the local residence times may be longer than the bulk or average residence time. Additionally, reliable experiments on ignition delay at gas turbine conditions are difficult to conduct. Devices for testing include shock tubes, rapid compression machine and flow reactors. In a flow reactor ignition delay data are commonly determined by measuring the distance from the fuel injector to the reaction front (L) and dividing it by the bulk or average flow velocity (U) under steady flow conditions to obtain a bulk residence time which is assumed to be equal to the ignition delay time. However this method is susceptible to the same boundary layer effects or recirculation zones found in premixers. An alternative method for obtaining ignition delay data in a flow reactor is presented herein, where ignition delay times are obtained by measuring the time difference between fuel injection and ignition using high speed instrumentation. Ignition delay times for methane, ethane and propane at gas turbine conditions were in the range of 40–500 ms. The results obtained show excellent agreement with recently proposed chemical mechanisms for hydrocarbons at low temperature/high pressure conditions.

Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons

2008 ◽  
Author(s):  
Gilles Bourque ◽  
Darren Healy ◽  
Henry Curran ◽  
Christopher Zinner ◽  
Danielle Kalitan ◽  
...  
Keyword(s):  
High Pressure ◽  
Chemical Kinetics ◽  
Ignition Delay ◽  
Laminar Flame ◽  
Flame Speed ◽  
Data Set ◽  
Chemical Kinetic Model ◽  
Fuel Blends ◽  
Ignition Delay Times ◽  
Delay Times

High-pressure experiments and chemical kinetics modeling were performed to generate a database and a chemical kinetic model that can characterize the combustion chemistry of methane-based fuel blends containing significant levels of heavy hydrocarbons (up to 37.5% by volume). Ignition delay times were measured in two different shock tubes and in a rapid compression machine at pressures up to 34 atm and temperatures from 740 to 1660 K. Laminar flame speeds were also measured at pressures up to 4 atm using a high-pressure vessel with optical access. Two different fuel blends containing ethane, propane, n-butane, and n-pentane added to methane were studied at equivalence ratios varying from lean (0.3) to rich (2.0). This paper represents the most comprehensive set of experimental ignition and laminar flame speed data available in the open literature for CH4/C2H6/C3H8/C4H10/C5H12 fuel blends with significant levels of C2+ hydrocarbons. Using these data, a detailed chemical kinetics model, based on current and recent work by the authors, was compiled and refined. The predictions of the model are very good over the entire range of ignition delay times, considering the fact that the data set is so thorough. Nonetheless, some improvements to the model can still be made with respect to ignition times at the lowest temperatures and for the laminar flame speeds at pressures above 1 atm and rich conditions.

Ignition Delay Times of Syngas and Methane in sCO2 Diluted Mixtures for Direct-Fired Cycles

2019 ◽  
Author(s):  
Samuel Barak ◽  
Owen Pryor ◽  
Erik Ninnemann ◽  
Sneha Neupane ◽  
Xijia Lu ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Ignition Delay ◽  
High Pressures ◽  
Chemical Kinetic ◽  
Time Data ◽  
Fuel Loading ◽  
Supercritical Regime ◽  
Reflected Shock ◽  
Ignition Delay Times ◽  
Delay Times

Abstract In this study, a shock tube is used to investigate combustion tendencies of several fuel mixtures under high carbon dioxide dilution and high fuel loading. Individual mixtures of oxy-syngas and oxy-methane fuels were added to CO2 bath gas environments and ignition delay time data was recorded. Reflected shock pressures maxed around 100 atm, which is above the critical pressure of carbon dioxide in to the supercritical regime. In total, five mixtures were investigated within a temperature range of 1050–1350K. Ignition delay times of all mixtures were compared with predictions of two leading chemical kinetic computer mechanisms for accuracy. The mixtures included four oxy-syngas and one oxy-methane combinations. The experimental data tended to show good agreement with the predictions of literature models for the methane mixture. For all syngas mixtures though the models performed reasonably well at some conditions, predictions were not able to accurately capture the overall behavior. For this reason, there is a need to further investigate the discrepancies in predictions. Additionally, more data must be collected at high pressures to fully understand the chemical kinetic behavior of these mixtures to enable the supercritical CO2 power cycle development.

High Pressure Ignition Delay Times Measurements and Comparison of the Performance of Several Oxy-Syngas Mechanisms Under High CO2 Dilution

2018 ◽  
Author(s):  
Samuel Barak ◽  
Erik Ninnemann ◽  
Sneha Neupane ◽  
Frank Barnes ◽  
Jayanta Kapat ◽  
...  
Keyword(s):  
Experimental Data ◽  
High Pressure ◽  
Ignition Delay ◽  
Current Data ◽  
High Co2 ◽  
Reflected Shock ◽  
Ignition Delay Times ◽  
Delay Times ◽  
Syngas Combustion ◽  
Data Points

In this study, syngas combustion was investigated behind reflected shock waves in CO2 bath gas to measure ignition delay times and to probe the effects of CO2 dilution. New syngas data were taken between pressures of 34.58–45.50 atm and temperatures of 1113–1275K. This study provides experimental data for syngas combustion in CO2 diluted environments: ignition studies in a shock tube (59 data points in 10 datasets). In total, these mixtures covered a range of temperatures T, pressures P, equivalence ratios φ, H2/CO ratio θ, and CO2 diluent concentrations. Multiple syngas combustion mechanisms exist in the literature for modelling ignition delay times and their performance can be assessed against data collected here. In total, twelve mechanisms were tested and presented in this work. All mechanisms need improvements at higher pressures for accurately predicting the measured ignition delay times. At lower pressures, some of the models agreed relatively well with the data. Some mechanisms predicted ignition delay times which were 2 orders of magnitudes different from the measurements. This suggests there is behavior that has not been fully understood on the kinetic models and are inaccurate in predicting CO2 diluted environments for syngas combustion. To the best of our knowledge, current data are the first syngas ignition delay times measurements close to 50 atm under highly CO2 diluted (85% per vol.) conditions.

High Pressure Ignition of Boron in Reduced Oxygen Atmospheres

1995 ◽  
Vol 418 ◽  
Author(s):  
R. O. Foelsche ◽  
M. J. Spalding ◽  
R. L. Burton ◽  
H. Krier
Keyword(s):  
High Pressure ◽  
Water Vapor ◽  
Shock Tube ◽  
Ignition Delay ◽  
Peak Pressure ◽  
Reflected Shock ◽  
Ignition Delay Times ◽  
Fluorine Compounds ◽  
Delay Times ◽  
Tube Study

AbstractBoron ignition delay times for 24 μm diameter particles have been measured behind the reflected shock at a shock tube endwall in reduced oxygen atmospheres and in a combustion bomb at higher pressures in the products of a hydrogen/oxygen/nitrogen reaction. The shock tube study independently varies temperature (1400 – 3200 K), pressure (8.5, 34 atm), and ignition-enhancer additives (water vapor, fluorine compounds). A combustion chamber is used at a peak pressure of 157 atm and temperature in excess of 2800 K to study ignition delays at higher pressures than are possible in the shock tube.

scholarly journals Ignition delay times of NH3 /DME blends at high pressure and low DME fraction: RCM experiments and simulations

2021 ◽  
Vol 227 ◽  
pp. 120-134
Author(s):  
Liming Dai ◽  
Hamid Hashemi ◽  
Peter Glarborg ◽  
Sander Gersen ◽  
Paul Marshall ◽  
...  
Keyword(s):  
High Pressure ◽  
Ignition Delay ◽  
Ignition Delay Times ◽  
Delay Times

Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

2019 ◽  
Vol 37 (4) ◽  
pp. 4555-4562 ◽  
Author(s):  
Jiankun Shao ◽  
Rishav Choudhary ◽  
David F. Davidson ◽  
Ronald K. Hanson ◽  
Samuel Barak ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Ignition Delay ◽  
High Pressures ◽  
Ignition Delay Times ◽  
Delay Times
Sign in / Sign up

Export Citation Format

Share Document