scholarly journals Modelling Chemical-Looping assisted by Oxygen Uncoupling (CLaOU): Assessment of natural gas combustion with calcium manganite as oxygen carrier

2019 ◽  
Vol 37 (4) ◽  
pp. 4361-4369 ◽  
Author(s):  
Alberto Abad ◽  
Pilar Gayán ◽  
Luis F. de Diego ◽  
Francisco García-Labiano ◽  
Juan Adánez
Keyword(s):  
Natural Gas ◽  
Oxygen Carrier ◽  
Chemical Looping ◽  
Gas Combustion ◽  
Calcium Manganite ◽  
Natural Gas Combustion

Research of pressure influence in the gas supply system on the energy consuption level of gas devices

2019 ◽  
Vol 6 (2) ◽  
pp. 56-63
Author(s):  
L. D. Pylypiv ◽  
І. І. Maslanych
Keyword(s):  
Natural Gas ◽  
Residential Buildings ◽  
Supply System ◽  
Normal Operation ◽  
Gas Combustion ◽  
Efficient Operation ◽  
Gas Consumption ◽  
Natural Gas Combustion ◽  
Gas Supply

There are investigated the influence of operating pressures in the gas supply system on the level of such energy indicators as efficiency, gas flow and gas overrun by gas equipment in residential buildings. There is established a relationship between the values of operating pressures in the gas supply system and the gas consumption level of household appliances. The causes of insufficient pressure in the gas networks of settlements are analyzed in the article. There is also developed an algorithm for calculating the change in the efficiency of gas appliances depending on the operational parameters of the gas network. It has been found that the most efficient operation of gas appliances is observed at an overpressure at the inlet of gas appliances of about 1200 Pa.To ensure the required quality of natural gas combustion among consumers and minimize gas consumption there are justified the following measures in the article: coordinating a domestic regulatory framework for assessing the quality of natural gas with international norms and standards; improving the preparation of gas coming from local wells before supplying it to gas distribution networks; auditing low pressure gas pipelines and reconstructing areas affected by corrosion; ensuring standard gas pressure in the network for the normal operation of domestic gas appliances; stating quality indicators of natural gas combustion by gas sales organizations.

Multiflame Patterns in Swirl-Driven Partially Premixed Natural Gas Combustion

2002 ◽  
Vol 125 (1) ◽  
pp. 40-45 ◽  
Author(s):  
K. P. Vanoverberghe ◽  
E. V. Van den Bulck ◽  
M. J. Tummers ◽  
W. A. Hu¨bner
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Gas Flow ◽  
State Transition ◽  
Gas Combustion ◽  
Bifurcation Phenomena ◽  
Major Species ◽  
Partially Premixed ◽  
Natural Gas Combustion ◽  
Low Nox Emission

Five different flame states are identified in a compact combustion chamber that is fired by a 30 kW swirl-stabilized partially premixed natural gas burner working at atmospheric pressure. These flame states include a nozzle-attached tulip shaped flame, a nonattached torroidal-ring shaped flame (SSF) suitable for very low NOx emission in a gas turbine combustor and a Coanda flame (CSF) that clings to the bottom wall of the combustion chamber. Flame state transition is generated by changing the swirl number and by premixing the combustion air with 70% of the natural gas flow. The flame state transition pathways reveal strong hysteresis and bifurcation phenomena. The paper also presents major species concentrations, temperature and velocity profiles of the lifted flame state and the Coanda flame and discusses the mechanisms of flame transition and stabilization.

Investigation of a Novel Gas Turbine Cycle With Coal Gas Fueled Chemical-Looping Combustion

2000 ◽  
Author(s):  
Hongguang Jin ◽  
Masaru Ishida
Keyword(s):  
Natural Gas ◽  
Fixed Bed ◽  
Combined Cycle ◽  
Fixed Bed Reactor ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Gas Combustion ◽  
Coal Gas ◽  
New Type ◽  
Oxidation Reactor

Abstract A new type of integrated gasification combined cycle (IGCC) with chemical-looping combustion and saturation for air is proposed and investigated. Chemical-looping combustion may be carried out in two successive reactions between two reactors, a reduction reactor (coal gas with metal oxides) and an oxidation reactor (the reduced metal with oxygen in air). The study on the new system has revealed that the thermal efficiency of this new-generation power plant will be increased by approximately 10–15 percentage points compared to the conventional IGCC with CO2 recovery. Furthermore, to develop the chemical-looping combustor, we have experimentally examined the kinetic behavior between solid looping materials and coal gas in a high-pressure fixed bed reactor. We have identified that the coal gas chemical-looping combustor has much better reactivity, compared to the natural gas one. This finding is completely different from the direct combustion in which combustion with natural gas is much easier than that with other fuels. Hence, this new type of coal gas combustion will make breakthrough in clean coal technology by simultaneously resolving energy and environment problems.

Development of a Natural Gas Combustion System for High Specific Power

MTZ worldwide ◽  
2015 ◽  
Vol 76 (10) ◽  
pp. 30-35
Author(s):  
Bertold Hüchtebrock ◽  
José Geiger ◽  
Avnish Dhongde ◽  
Harsh Sankhla
Keyword(s):  
Natural Gas ◽  
Specific Power ◽  
Combustion System ◽  
Gas Combustion ◽  
High Specific Power ◽  
Natural Gas Combustion

Sequential-Based Process Modeling of Natural Gas Combustion in a Fluidized Bed Reactor

2012 ◽  
Vol 26 (4) ◽  
pp. 2058-2067 ◽  
Author(s):  
Abolhasan Hashemi Sohi ◽  
Ali Eslami ◽  
Amir Sheikhi ◽  
Rahmat Sotudeh-Gharebagh
Keyword(s):  
Natural Gas ◽  
Fluidized Bed ◽  
Process Modeling ◽  
Fluidized Bed Reactor ◽  
Gas Combustion ◽  
Natural Gas Combustion
Sign in / Sign up

Export Citation Format

Share Document