Experimental study of the structure of forward-tilting rotating detonation waves and highly maintained combustion chamber pressure in a disk-shaped combustor

2017 ◽  
Vol 36 (2) ◽  
pp. 2673-2680 ◽  
Author(s):  
Soma Nakagami ◽  
Ken Matsuoka ◽  
Jiro Kasahara ◽  
Akiko Matsuo ◽  
Ikkoh Funaki
Keyword(s):  
Experimental Study ◽  
Combustion Chamber ◽  
Chamber Pressure ◽  
Detonation Waves ◽  
Rotating Detonation

Evaluation of Combustion Chamber Pressure of 1N-Class Green Monopropellant Thruster with Discharge Plasma System

2017 ◽  
Vol 65 (3) ◽  
pp. 117-122
Author(s):  
Asato WADA ◽  
Hiroshi MAEDA ◽  
Takahiro SHINDO ◽  
Hiroki WATANABE ◽  
Haruki TAKEGAHARA
Keyword(s):  
Combustion Chamber ◽  
Discharge Plasma ◽  
Chamber Pressure ◽  
Plasma System

Numerical Modeling of the RDE

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Michal Folusiak ◽  
Karol Swiderski ◽  
Piotr Wolański
Keyword(s):  
Combustion Chamber ◽  
Turbine Engine ◽  
Rotating Detonation Engine ◽  
University Of Technology ◽  
Detonation Combustion ◽  
Detonation Engine ◽  
Innovative Economy ◽  
Turboshaft Engine ◽  
The University ◽  
Rotating Detonation

AbstractThe idea of using the phenomenon of rotating detonation to propulsion has its roots in fifties of the last century in works of Adamson et al. and Nicholls et al. at the University of Michigan. The idea was recently reinvented and experimental research and numerical simulations on the Rotating Detonation Engine (RDE) are carried in numerous institutions worldwide, in Poland at Warsaw University of Technology (WUT) since 2004. Over the period 2010-2014 WUT and Institute of Aviation (IOA) jointly implemented the project under the Innovative Economy Operational Programme entitled ‘Turbine engine with detonation combustion chamber’. The goal of the project was to replace the combustion chamber of turboshaft engine GTD-350 with the annular detonation chamber.This paper is focused on investigation of the influence of a geometry and flow conditions on the structure and propagation stability of the rotating detonation wave. Presented results are in majority an outcome of the aforementioned programme, in particular authors’ works on the development of the in-house code REFLOPS USG and its application to simulation of the rotating detonation propagation in the RDE.

Preliminary Studies on Non-Reactive Flow Vortex Cooling

2019 ◽  
Vol 12 (3) ◽  
pp. 262-271
Author(s):  
T.N. Rajesh ◽  
T.J.S. Jothi ◽  
T. Jayachandran
Keyword(s):  
Combustion Chamber ◽  
Inner Core ◽  
Rocket Engine ◽  
Injection Pressure ◽  
Chamber Pressure ◽  
Reactive Flow ◽  
Stoichiometric Ratio ◽  
Gaseous Oxygen ◽  
Mixture Ratio ◽  
Vortex Combustion

Background: The impulse for the propulsion of a rocket engine is obtained from the combustion of propellant mixture inside the combustion chamber and as the plume exhausts through a convergent- divergent nozzle. At stoichiometric ratio, the temperature inside the combustion chamber can be as high as 3500K. Thus, effective cooling of the thrust chamber becomes an essential criterion while designing a rocket engine. Objective: A new cooling method of thrust chambers was introduced by Chiaverni, which is termed as Vortex Combustion Cold-Wall Chamber (VCCW). The patent works on cyclone separators and confined vortex flow mechanism for providing high propellant mixing with improved degree of turbulence inside the combustion chamber, providing the required notion for studies on VCCW. The flow inside a VCCW has a complex structure characterised by axial pressure losses, swirl velocities, centrifugal force, flow reversal and strong turbulence. In order to study the flow phenomenon, both the experimental and numerical investigations are carried out. Methods: In this study, non-reactive flow analysis was conducted with real propellants like gaseous oxygen and hydrogen. The test was conducted to analyse the influence of mixture ratio and injection pressure of the propellants on the chamber pressure in a vortex combustion chamber. A vortex combustor was designed in which the oxidiser injected tangentially at the aft end near the nozzle spiraled up to the top plate and formed an inner core inside the chamber. The fuel was injected radially from injectors provided near the top plate and the propellants were mixed in the inner core. This resulted in enhanced mixing and increased residence time for the fuel. More information on the flow behaviour has been obtained by numerical analysis in Fluent. The test also investigated the sensitivity of the tangential injection pressure on the chamber pressure development. Results: All the test cases showed an increase in chamber pressure with the mixture ratio and injection pressure of the propellants. The maximum chamber pressure was found to be 3.8 bar at PC1 and 2.7 bar at PC2 when oxidiser to fuel ratio was 6.87. There was a reduction in chamber pressure of 1.1 bar and 0.7 bar at PC1 and PC2, respectively, in both the cases when hydrogen was injected. A small variation in the pressure of the propellant injected tangentially made a pronounced effect on the chamber pressure and hence vortex combustion chamber was found to be very sensitive to the tangential injection pressure. Conclusion: VCCW mechanism has been to be found to be very effective for keeping the chamber surface within the permissible limit and also reducing the payload of the space vehicle.

Investigation of Rotating Detonation Waves in an Annular Gap

2020 ◽  
Vol 310 (1) ◽  
pp. 185-201
Author(s):  
V. A. Levin ◽  
I. S. Manuylovich ◽  
V. V. Markov
Keyword(s):  
Detonation Waves ◽  
Annular Gap ◽  
Rotating Detonation
Sign in / Sign up

Export Citation Format

Share Document