scholarly journals Enhanced structural, electrical, mechanical properties and antibacterial activity of Cs/PEO doped mixed nanoparticles (Ag/TiO2) for food packaging applications

2021 ◽  
Vol 93 ◽  
pp. 107013
Author(s):  
M.M. Abutalib ◽  
A. Rajeh
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
Food Packaging ◽  
Mixed Nanoparticles

scholarly journals Utilization Of Sugarcane Bagasse Cellulose-Clay Nanocomposite As A Biodegradable And Antibacterial Packaging Material To Extend The Food's Shelf Life

Khazanah ◽  
2020 ◽  
Vol 12 (2) ◽  
Author(s):  
Nadya Fitriani Pitaloka ◽  
◽  
Ardilla Sriwijayanti ◽  
Santi Anisa ◽  
Irne Dyah Ayu Wijayanti ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
Water Vapor ◽  
Shelf Life ◽  
Sugarcane Bagasse ◽  
Toxicity Test ◽  
Nanocomposite Film ◽  
Food Packaging ◽  
Antibacterial Properties ◽  
Vapor Permeability

Food packaging materials derived from fossil fuels are single-use products that harm the health of living things when disposed of by releasing toxic byproducts. Many communities are starting to be more environmentally friendly by using biopolymers. However, some biopolymers do not have antibacterial properties, thus shortening the food’s shelf life and not applicable in food packaging. Therefore, the purpose of this work is to develop a biodegradable and antimicrobial food packaging from sugarcane bagasse and clay that degrades over time without compromising the food’s shelf life. Cellulose acetate butyrate (cab) was prepared in an amimcl ionic liquid system from sugarcane bagasse. Then the cab was plasticized using peg, resulting a film. Besides, montmorillonite (mmt) clay was modified with aryl ammonium cations using a cation exchange technique to form bmmt. The nanocomposite film was prepared by mixing the plasticized cab and bmmt, then heated at 50c to evaporate the solution. The nanocomposite film was obtained as a prototype of food packaging. Several tests were conducted including mechanical properties, water vapor permeability (wvp), antimicrobial and toxicity test. Based on research by saha et.al, 2008, the nanocomposite film with the cag, peg and bmmt 100:20:3 composition gave the best mechanical properties because of the agglomeration of bmmt. Also, the nanocomposite film had promising wvp properties as a plastic because the clay layers reduced the water vapor diffusion across the polymer matrix. The toxicity test showed that this nanocomposite film was compatible in human blood. Lastly, this nanocomposite film has antibacterial activity against b. Subtilis and p. Cepacia because of the bmmt presence. In conclusion, the nanocomposite film from sugarcane bagasse and clay containing cag, peg and bmmt 100:20:3 is a promising material for a biodegradable and antimicrobial food packaging, because it has sufficient mechanical properties, antibacterial activity, low wvp and is non-toxic.

scholarly journals Evaluation of Antibacterial Activity, Biodegradability and Mechanical Properties of Chitosan Blended ZnO Biofilm for Food Packaging

2020 ◽  
Vol 36 (03) ◽  
pp. 367-372
Author(s):  
Suprabha Palatsingh ◽  
Abhisikta Mohanta ◽  
Nihar Ranjan Panda ◽  
Dojalisa Sahu
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
Food Packaging

scholarly journals Tannic-Acid-Cross-Linked and TiO2-Nanoparticle-Reinforced Chitosan-Based Nanocomposite Film

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 228
Author(s):  
Swarup Roy ◽  
Lindong Zhai ◽  
Hyun Chan Kim ◽  
Duc Hoa Pham ◽  
Hussein Alrobei ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tannic Acid ◽  
Nanocomposite Film ◽  
Food Packaging ◽  
Titanium Dioxide Nanoparticles ◽  
Casting Technique ◽  
Active Food Packaging ◽  
Reinforcing Agent ◽  
Solution Casting Technique ◽  
Cross Linker

A chitosan-based nanocomposite film with tannic acid (TA) as a cross-linker and titanium dioxide nanoparticles (TiO2) as a reinforcing agent was developed with a solution casting technique. TA and TiO2 are biocompatible with chitosan, and this paper studied the synergistic effect of the cross-linker and the reinforcing agent. The addition of TA enhanced the ultraviolet blocking and mechanical properties of the chitosan-based nanocomposite film. The reinforcement of TiO2 in chitosan/TA further improved the nanocomposite film’s mechanical properties compared to the neat chitosan or chitosan/TA film. The thermal stability of the chitosan-based nanocomposite film was slightly enhanced, whereas the swelling ratio decreased. Interestingly, its water vapor barrier property was also significantly increased. The developed chitosan-based nanocomposite film showed potent antioxidant activity, and it is promising for active food packaging.

scholarly journals Effect of Organic Modifier Types on the Physical–Mechanical Properties and Overall Migration of Post-Consumer Polypropylene/Clay Nanocomposites for Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1502
Author(s):  
Eliezer Velásquez ◽  
Sebastián Espinoza ◽  
Ximena Valenzuela ◽  
Luan Garrido ◽  
María José Galotto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Clay Nanocomposites ◽  
Organic Modifier ◽  
Thermal And Mechanical Properties ◽  
Chemical Safety ◽  
Elongation At Break ◽  
Fatty Food ◽  
Recycled Plastics ◽  
Thermal Stability Of

The deterioration of the physical–mechanical properties and loss of the chemical safety of plastics after consumption are topics of concern for food packaging applications. Incorporating nanoclays is an alternative to improve the performance of recycled plastics. However, properties and overall migration from polymer/clay nanocomposites to food require to be evaluated case-by-case. This work aimed to investigate the effect of organic modifier types of clays on the structural, thermal and mechanical properties and the overall migration of nanocomposites based on 50/50 virgin and recycled post-consumer polypropylene blend (VPP/RPP) and organoclays for food packaging applications. The clay with the most hydrophobic organic modifier caused higher thermal stability of the nanocomposites and greater intercalation of polypropylene between clay mineral layers but increased the overall migration to a fatty food simulant. This migration value was higher from the 50/50 VPP/RPP film than from VPP. Nonetheless, clays reduced the migration and even more when the clay had greater hydrophilicity because of lower interactions between the nanocomposite and the fatty simulant. Conversely, nanocomposites and VPP/RPP control films exhibited low migration values in the acid and non-acid food simulants. Regarding tensile parameters, elongation at break values of PP film significantly increased with RPP addition, but the incorporation of organoclays reduced its ductility to values closer to the VPP.

scholarly journals Influence of a Natural Plant Antioxidant on the Ageing Process of Ethylene-norbornene Copolymer (Topas)

2021 ◽  
Vol 22 (8) ◽  
pp. 4018
Author(s):  
Anna Masek ◽  
Angelika Plota
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Colour Change ◽  
Good Alternative ◽  
Plant Origin ◽  
Aging Behavior ◽  
Current State ◽  
Ft Ir ◽  
Potential Use

In the field of polymer technology, a variety of mainly synthetic additives are used to stabilize the materials during processing. However, natural compounds of plant origin can be a green alternative to chemicals such as synthetic polyphenols. An analysis of the effect of hesperidin on the aging behavior of ethylene-norbornene copolymer was performed. The evaluation of changes in the tested samples was possible by applying the following tests: determination of the surface energy and OIT values, mechanical properties analysis, colour change measurements, FT-IR and TGA analyses. The obtained results proved that hesperidin can be effectively used as natural stabilizer for polymers. Furthermore, as a result of this compound addition to Topas-silica composites, their surface and physico-mechanical properties have been improved and the resistance to aging significantly increased. Additionally, hesperidin can act as a dye or colour indicator and only few scientific reports describe a possibility of using flavonoids to detect changes in products during their service life, e.g., in food packaging. In the available literature, there is no information about the potential use of hesperidin as a stabilizer for cycloolefin copolymers. Therefore, this approach may contribute not only to the current state of knowledge, but also presents an eco-friendly solution that can be a good alternative to synthetic stabilizers.

Fabrication of PVA/PAAm IPN hydrogel with high adhesion and enhanced mechanical properties for body sensors and antibacterial activity

2021 ◽  
Vol 146 ◽  
pp. 110253
Author(s):  
Zhenghao Li ◽  
Wenlong Xu ◽  
Xinhao Wang ◽  
Wenqing Jiang ◽  
Xiaolong Ma ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
High Adhesion ◽  
Body Sensors

scholarly journals Understanding the Barrier and Mechanical Behavior of Different Nanofillers in Chitosan Films for Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 721 ◽  
Author(s):  
João Pires ◽  
Camila Damásio de Paula ◽  
Victor Gomes Lauriano Souza ◽  
Ana Luísa Fernando ◽  
Isabel Coelhoso
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Food Packaging ◽  
Scientific Research ◽  
Barrier Properties ◽  
Plastic Pollution ◽  
Functional Attributes ◽  
Chitosan Films ◽  
Commercial Applications ◽  
Innovative Techniques

The continuous petroleum-based plastics manufacturing generates disposal issues, spreading the problem of plastic pollution and its rise in the environment. Recently, innovative techniques and scientific research promoted biopolymers as the primary alternative for traditional plastics, raising and expanding global bioplastic production. Due to its unmatched biological and functional attributes, chitosan (Ch) has been substantially explored and employed as a biopolymeric matrix. Nevertheless, the hydrophilicity and the weak mechanical properties associated with this biopolymer represent a significant intrinsic restriction to its implementation into some commercial applications, namely, in food packaging industries. Distinct methodologies have been utilized to upgrade the mechanical and barrier properties of Ch, such as using organic or inorganic nanofillers, crosslinkers, or blends with other polymers. This review intends to analyze the most recent works that combine the action of different nanoparticle types with Ch films to reinforce their mechanical and barrier properties.

Sign in / Sign up

Export Citation Format

Share Document