Effects of vulcanization accelerator functionalized graphene on the co-vulcanization kinetics and mechanical strength of NR/SBR blends

2020 ◽  
Vol 81 ◽  
pp. 106169 ◽  
Author(s):  
Huanhuan Dong ◽  
Yuanfang Luo ◽  
Bangchao Zhong ◽  
Jie Bai ◽  
Demin Jia
Keyword(s):  
Mechanical Strength ◽  
Functionalized Graphene ◽  
Vulcanization Kinetics ◽  
Vulcanization Accelerator

Phytic acid-assisted electrochemically synthesized three-dimensional O, P-functionalized graphene monoliths with high capacitive performance

Nanoscale ◽  
2017 ◽  
Vol 9 (34) ◽  
pp. 12601-12608 ◽  
Author(s):  
Han-Yu Li ◽  
Lang Liu ◽  
Zhi-Wei Zhang ◽  
Shu-Shen Wang ◽  
Yao Yu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Energy Storage ◽  
Mechanical Strength ◽  
Porous Structure ◽  
Phytic Acid ◽  
Three Dimensional ◽  
Energy Storage Materials ◽  
Functionalized Graphene ◽  
Characteristic P ◽  
Capacitive Performance

Three-dimensional functionalized graphene monoliths (3DFGMs) have attracted intensive attention as energy storage materials due to their unique interconnected porous structure, good electrical conductivity, excellent mechanical strength, and pseudocapacitive characteristic.

FORMULATION AND DEVELOPMENT OF FAST DISSOLVING TABLET OF METOCLOPRAMIDE: AN ANTI-EMETIC DRUG

2019 ◽  
Vol 8 (6) ◽  
Author(s):  
Avilash Carpenter ◽  
M.K. Gupta ◽  
Neetesh Kumar Jain ◽  
Urvashi Sharma ◽  
Rahul Sisodiya
Keyword(s):  
Mechanical Strength ◽  
Standard Procedure ◽  
Flow Property ◽  
Storage Conditions ◽  
Angle Of Repose ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Powder Blend ◽  
Standard Curve ◽  
The Stability

Aim: The main of the study is to formulate and develop orally disintegrating fast dissolving tablet of Metoclopramide hydrochloride. Material & Methods: Before formulation and development of selected drug, the standard curve in buffer was prepared and absorbance at selected maxima was taken. Then two different disintegrating agents were selected and drug was mixed with disintegrating agents in different ratio. Various Preformulation parameters and evaluation of tablet i.e. disintegration time, dissolution time, friability, hardness, thickness were measured by standard procedure. Result & Discussion: The angle of repose for all the batches prepared. The values were found to be in the range of 30.46 to 36.45, which indicates good flow property for the powder blend according to the USP. The bulk density and tapped density for all the batches varied from 0.49 to 0.54 g/mL and 0.66 to 0.73, respectively. Carr’s index values were found to be in the range of 23.33 to 25.88, which is satisfactory for the powders as well as implies that the blends have good compressibility. Hausner ratio values obtained were in the range of 1.22 to 1.36, which shows a passable flow property for the powder blend based on the USP. The results for tablet thickness and height for all batches was found to range from 4.45 to 4.72 mm and 3.67 to 3.69 mm, respectively. Hardness or breaking force of tablets for all batches was found to range from 32.8 to 36.2 N. Tablet formulations must show good mechanical strength with sufficient hardness in order to handle shipping and transportation. Friability values for all the formulations were found to be in the range of 0.22 % to 0.30 %. Conclusion: Orally disintegrating tablets were compressed in order to have sufficient mechanical strength and integrity to withstand handling, shipping and transportation. The formulation was shown to have a rapid disintegration time that complied with the USP (less than one minute). The data obtained from the stability studies indicated that the orally disintegrating mini-tablets of MTH were stable under different environmental storage conditions. Keywords: Formulation & Development, Fast Dissolving Tablet, Metoclopramide, Anti-Emetic Drug, Oral Disintegrating Tablet

Plasma Enhanced Chemical Vapor Deposition of Porous Organosilicate Glass ILD Films With k ≤ 2.4.

2003 ◽  
Vol 766 ◽  
Author(s):  
Raymond N. Vrtis ◽  
Mark L. O'Neill ◽  
Jean L. Vincent ◽  
Aaron S. Lukas ◽  
Brian K. Peterson ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Chemical Vapor Deposition ◽  
Mechanical Strength ◽  
Thermal Annealing ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organosilicate Glass

AbstractWe report on our work to develop a process for depositing nanoporous organosilicate (OSG) films via plasma enhanced chemical vapor deposition (PECVD). This approach entails codepositing an OSG material with a plasma polymerizable hydrocarbon, followed by thermal annealing of the material to remove the porogen, leaving an OSG matrix with nano-sized voids. The dielectric constant of the final film is controlled by varying the ratio of porogen precursor to OSG precursor in the delivery gas. Because of the need to maintain the mechanical strength of the final material, diethoxymethylsilane (DEMS) is utilized as the OSG precursor. Utilizing this route we are able to deposit films with a dielectric constant of 2.55 to 2.20 and hardness of 0.7 to 0.3 GPa, respectively.

DMV 59

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.

Sign in / Sign up

Export Citation Format

Share Document