Effects of compatibilizers and electron radiation on thermomechanical properties of composites consisting of five recycled polymers

2008 ◽  
Vol 27 (4) ◽  
pp. 420-427 ◽  
Author(s):  
Marian Żenkiewicz ◽  
Małgorzata Kurcok
Keyword(s):  
Thermomechanical Properties ◽  
Electron Radiation ◽  
Properties Of Composites

Actuation of Shape Memory Polymer by Resistive Heating of Carbon Nanopaper

2009 ◽  
Author(s):  
Haibao Lu ◽  
Yong Tang ◽  
Jihua Gou ◽  
Erin Chow ◽  
Jinsong Leng ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Carbon Nanofiber ◽  
Volume Fraction ◽  
Shape Memory Polymer ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Paper Sheet ◽  
Scanning Electron ◽  
Properties Of Composites

To electrically activate the shape recovery in a styrene-based shape-memory polymer (SMP) by coating with conductive carbon nanofiber paper has been demonstrated in this paper. Carbon nanofibers in the form of paper sheet in combination with SMP significantly improve the electrical and thermal conductivity of polymer, leading to the actuation of SMP/nanopaper composite (with 15% volume fraction of carbon nanopaper, dimension of 10.0 cm × 0.5 cm × 0.3 cm) can be carried out by applying 8.4 V voltage, with response time of 140 s. Therefore, electrical conductivity of 6.6 S/cm is obtained. This approach, although demonstrated in styrene-based polymer, is applicable to other type of SMP materials. Furthermore, the morphologies of carbon nanofiber in the form of paper is observed by scanning electron microscopy, and the thermomechanical properties of composites are measured and analyzed by dynamic mechanical analysis.

scholarly journals Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2476
Author(s):  
Katarzyna Bednarczyk ◽  
Tomasz Kukulski ◽  
Ryszard Fryczkowski ◽  
Ewa Schab-Balcerzak ◽  
Marcin Libera
Keyword(s):  
Organic Solar Cells ◽  
Polyamide 6 ◽  
Thermomechanical Properties ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Mechanical And Electrical Properties ◽  
Ft Ir ◽  
Conductive Properties ◽  
The Impact ◽  
Properties Of Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl3 and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T5 values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA Tg values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).

Effects of Additives on Thermomechanical Properties of Composites Formed from Thermoset Polymers

1998 ◽  
Vol 542 ◽  
Author(s):  
A. Radisic ◽  
P. S. Valimbe ◽  
V. M. Malhotra
Keyword(s):  
Silicon Carbide ◽  
Coal Tar ◽  
Thermomechanical Properties ◽  
Coal Tar Pitch ◽  
Heavy Duty ◽  
Exact Role ◽  
Friction Materials ◽  
Frictional Properties ◽  
Complex Shapes ◽  
Properties Of Composites

AbstractAutomotive and heavy-duty friction materials are complex multimaterial composites that contain, besides polymers and fibers, a number of constituents whose exact role is not well delineated. Since the performance of these composites requires not only uniform frictional properties but also complex shapes, advanced formation techniques are required. However, before these techniques can be harnessed, we attempted to understand how nitrile rubber-modified phenolic polymer's structural and thermal behaviors were modified by the incorporation of materials such as BaSO4, graphite, coal tar pitch, slag fibers, alumina, and silicon carbide, typical friction composite ingredients. The formed composites were examined by FTIR, DSC, and DMA techniques at 300 K < T < 600 K. Our results suggested that the incorporation of ingredients, singly and additively, strongly affected the thermomechanical properties of the formed

Antibacterial and thermomechanical properties of composites of polylactic acid modified with capsicum oleoresin‐impregnated nanoporous silica

2019 ◽  
Vol 136 (31) ◽  
pp. 47825 ◽  
Author(s):  
Laongdaw Techawinyutham ◽  
Suchart Siengchin ◽  
Jyotishkumar Parameswaranpillai ◽  
Rapeephun Dangtungee
Keyword(s):  
Polylactic Acid ◽  
Thermomechanical Properties ◽  
Nanoporous Silica ◽  
Properties Of Composites

Semiclassical electron-radiation-ion dynamics (SERID) and cis - trans photoisomerization of butadiene

2003 ◽  
Vol 50 (15-17) ◽  
pp. 2615-2643 ◽  
Author(s):  
Yusheng Dou ◽  
Ben R. Torralva ◽  
Roland E. Allen
Keyword(s):  
Electron Radiation ◽  
Ion Dynamics
Sign in / Sign up

Export Citation Format

Share Document