X-ray studies of regenerated cellulose fibers wet spun from cotton linter pulp in NaOH/thiourea aqueous solutions

Polymer ◽  
2006 ◽  
Vol 47 (8) ◽  
pp. 2839-2848 ◽  
Author(s):  
Xuming Chen ◽  
Christian Burger ◽  
Dufei Fang ◽  
Dong Ruan ◽  
Lina Zhang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Cellulose Fibers ◽  
Regenerated Cellulose ◽  
Cotton Linter ◽  
X Ray

scholarly journals The colloidal structure of a cellulose fiber

Cellulose ◽  
2021 ◽  
Author(s):  
Marta Gubitosi ◽  
Shirin Asaadi ◽  
Herbert Sixta ◽  
Ulf Olsson
Keyword(s):  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Liquid Solution ◽  
Fiber Axis ◽  
Regenerated Cellulose ◽  
Colloidal Structure ◽  
Amorphous Cellulose ◽  
X Ray ◽  
Saxs Pattern ◽  
Ionic Liquid Solution

Abstract We present a small angle X-ray scattering (SAXS) study of the colloidal structure of regenerated cellulose fibers, air-gap spun from an ionic liquid solution. Based on the data, and a different interpretation of the anisotropic SAXS pattern, we propose a slightly different colloidal structure of the fibers, than what is commonly assumed for regenerated cellulose fibers. Fibers with two different degrees of orientation, as produced by different draw ratios, DR = 2 and 15, respectively, are analyzed. The 2D SAXS pattern is highly anisotropic with striking cross-like pattern, having scattering predominantly perpendicular and parallel to the fiber axis. This cross-like pattern suggest a colloidal structure with oriented crystalline lamellae of ca. 10 nm thickness, embedded within a continuous matrix of amorphous cellulose. The lamellae are oriented with their normal parallel with the fiber axis. Complementary wide angle X-ray diffraction data confirm that the lamellae normal direction corresponds to the cellulose chain direction (c-direction) in the monoclinic cellulose crystal (Cellulose II). Graphic abstract

Recrystallization of the Cellulose I Lattice in Mercerized and Regenerated Cellulose Fibers

1969 ◽  
Vol 39 (1) ◽  
pp. 70-77 ◽  
Author(s):  
B. R. Manjunath ◽  
N. Peacock
Keyword(s):  
Cellulose Fibers ◽  
Cotton Cellulose ◽  
Regenerated Cellulose ◽  
Cellulose I ◽  
Soda Cellulose ◽  
X Ray ◽  
Ageing Processes ◽  
Cellulose Iv

Cotton cellulose has been subjected to swelling and stretching treatments under various conditions. It has been found that the cellulose I lattice is highly resistant to alkali attack and difficult to disrupt completely during a single swelling treatment. The residual cellulose 1 “nuclei” grow upon stretching the swollen fibers. The amount of the recrystallized fraction is proportional to the residual cellulose I in the slack-mercerized samples. X-ray investigations carried out on several rayons indicate that the extraneous lattice in the viscose rayons is cellulose I and not cellulose IV, as supposed earlier. This is confirmed by the incomplete conversion of cellulose I to soda-cellulose in “mercerization and ageing” processes and also by the sensitiveness of cellulose I to stretching. Evidence on cuprammonium rayon and Fortisan, which appear to be better dispersed in solution and, therefore, contain no cellulose I, supports this view.

A morphological and energy-dispersive x-ray spectroscopy (EDS) investigation of separator-grade cellophane

1994 ◽  
Vol 52 ◽  
pp. 430-431
Author(s):  
Michael E. Rock ◽  
Vern Kennedy ◽  
Bhaskar Deodhar ◽  
Thomas G. Stoebe
Keyword(s):  
Extrusion Process ◽  
Morphological Characterization ◽  
Energy Dispersive ◽  
Regenerated Cellulose ◽  
Battery System ◽  
X Ray ◽  
Functional Differences ◽  
Transmission Electron ◽  
Separator Material ◽  
Underwater Target

Cellophane is a composite polymer material, made up of regenerated cellulose (usually derived from wood pulp) which has been chemically transformed into "viscose", then formed into a (1 mil thickness) transparent sheet through an extrusion process. Although primarily produced for the food industry, cellophane's use as a separator material in the silver-zinc secondary battery system has proved to be another important market. We examined 14 samples from five producers of cellophane, which are being evaluated as the separator material for a silver/zinc alkaline battery system in an autonomous underwater target vehicle. Our intent was to identify structural and/or chemical differences between samples which could be related to the functional differences seen in the lifetimes of these various battery separators. The unused cellophane samples were examined by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Cellophane samples were cross sectioned (125-150 nm) using a diamond knife on a RMC MT-6000 ultramicrotome. Sections were examined in a Philips 430-T TEM at 200 kV. Analysis included morphological characterization, and EDS (for chemical composition). EDS was performed using an EDAX windowless detector.

scholarly journals α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 581
Author(s):  
Gajanan S. Ghodake ◽  
Surendra K. Shinde ◽  
Ganesh D. Saratale ◽  
Rijuta G. Saratale ◽  
Min Kim ◽  
...  
Keyword(s):  
Enzyme Immobilization ◽  
Photoelectron Spectroscopy ◽  
Cellulose Fibers ◽  
Relative Activity ◽  
Significant Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Laccase Immobilization ◽  
Surface Modified

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

scholarly journals Preparation and Characterization of the Sulfur-Impregnated Natural Zeolite Clinoptilolite for Hg(II) Removal from Aqueous Solutions

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 217
Author(s):  
Marin Ugrina ◽  
Martin Gaberšek ◽  
Aleksandra Daković ◽  
Ivona Nuić
Keyword(s):  
Chemical Modification ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Natural Zeolite ◽  
Contact Time ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

Sulfur-impregnated zeolite has been obtained from the natural zeolite clinoptilolite by chemical modification with Na2S at 150 °C. The purpose of zeolite impregnation was to enhance the sorption of Hg(II) from aqueous solutions. Chemical analysis, acid and basic properties determined by Bohem’s method, chemical behavior at different pHo values, zeta potential, cation-exchange capacity (CEC), specific surface area, X-ray powder diffraction (XRPD), scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), as well as thermogravimetry with derivative thermogravimetry (TG-DTG) were used for detailed comparative mineralogical and physico-chemical characterization of natural and sulfur-impregnated zeolites. Results revealed that the surface of the natural zeolite was successfully impregnated with sulfur species in the form of FeS and CaS. Chemical modification caused an increase in basicity and the net negative surface charge due to an increase in oxygen-containing functional groups as well as a decrease in specific surface area and crystallinity due to the formation of sulfur-containing clusters at the zeolite surface. The sorption of Hg(II) species onto the sulfur-impregnated zeolite was affected by the pH, solid/liquid ratio, initial Hg(II) concentration, and contact time. The optimal sorption conditions were determined as pH 2, a solid/liquid ratio of 10 g/L, and a contact time of 800 min. The maximum obtained sorption capacity of the sulfur-impregnated zeolite toward Hg(II) was 1.02 mmol/g. The sorption mechanism of Hg(II) onto the sulfur-impregnated zeolite involves electrostatic attraction, ion exchange, and surface complexation, accompanied by co-precipitation of Hg(II) in the form of HgS. It was found that sulfur-impregnation enhanced the sorption of Hg(II) by 3.6 times compared to the natural zeolite. The leaching test indicated the retention of Hg(II) in the zeolite structure over a wide pH range, making this sulfur-impregnated sorbent a promising material for the remediation of a mercury-polluted environment.

Process-Induced Microstructure in Viscose and Lyocell Regenerated Cellulose Fibers Revealed by SAXS and SEM of Acid-Etched Samples

2021 ◽  
Author(s):  
Aakash Sharma ◽  
Parnashri Wankhede ◽  
Roopali Samant ◽  
Shailesh Nagarkar ◽  
Shirish Thakre ◽  
...  
Keyword(s):  
Cellulose Fibers ◽  
Regenerated Cellulose

scholarly journals Correction to “Recycling of Superbase-Based Ionic Liquid Solvents for the Production of Textile-Grade Regenerated Cellulose Fibers in the Lyocell Process”

2020 ◽  
Vol 8 (49) ◽  
pp. 18345-18345
Author(s):  
Sherif Elsayed ◽  
Jussi Helminen ◽  
Sanna Hellsten ◽  
Chamseddine Guizani ◽  
Joanna Witos ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Cellulose Fibers ◽  
Regenerated Cellulose

scholarly journals Fabrication and Application of SERS-Active Cellulose Fibers Regenerated from Waste Resource

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2142
Author(s):  
Shengjun Wang ◽  
Jiaqi Guo ◽  
Yibo Ma ◽  
Alan X. Wang ◽  
Xianming Kong ◽  
...  
Keyword(s):  
Au Nanoparticles ◽  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Regenerated Cellulose ◽  
Sers Substrate ◽  
Au Nps ◽  
Convenient Approach ◽  
Theoretical Simulations ◽  
Difference Time ◽  
Raman Probe

The flexible SERS substrate were prepared base on regenerated cellulose fibers, in which the Au nanoparticles were controllably assembled on fiber through electrostatic interaction. The cellulose fiber was regenerated from waste paper through the dry-jet wet spinning method, an eco-friendly and convenient approach by using ionic liquid. The Au NPs could be controllably distributed on the surface of fiber by adjusting the conditions during the process of assembling. Finite-difference time-domain theoretical simulations verified the intense local electromagnetic fields of plasmonic composites. The flexible SERS fibers show excellent SERS sensitivity and adsorption capability. A typical Raman probe molecule, 4-Mercaptobenzoicacid (4-MBA), was used to verify the SERS cellulose fibers, the sensitivity could achieve to 10−9 M. The flexible SERS fibers were successfully used for identifying dimetridazole (DMZ) from aqueous solution. Furthermore, the flexible SERS fibers were used for detecting DMZ from the surface of fish by simply swabbing process. It is clear that the fabricated plasmonic composite can be applied for the identifying toxins and chemicals.

Sign in / Sign up

Export Citation Format

Share Document