Scale levels of deformation and fracture and mechanical properties of 25CrlMolV steel before and after nonisothermal loading

2011 ◽  
Vol 14 (1-2) ◽  
pp. 57-65 ◽  
Author(s):  
P.V. Yasniy ◽  
P.O. Maruschak ◽  
S.V. Panin ◽  
R.T. Bishchak
Keyword(s):  
Mechanical Properties ◽  
Nonisothermal Loading ◽  
Deformation And Fracture ◽  
Before And After ◽  
Scale Levels

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

scholarly journals Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Przemysław Snopiński ◽  
Mariusz Król ◽  
Marek Pagáč ◽  
Jana Petrů ◽  
Jiří Hajnyš ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Equal Channel Angular Pressing ◽  
Heat Treatments ◽  
Electron Backscattered Diffraction ◽  
Angular Pressing ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Before And After ◽  
The Impact

AbstractThis study investigated the impact of the equal channel angular pressing (ECAP) combined with heat treatments on the microstructure and mechanical properties of AlSi10Mg alloys fabricated via selective laser melting (SLM) and gravity casting. Special attention was directed towards determining the effect of post-fabrication heat treatments on the microstructural evolution of AlSi10Mg alloy fabricated using two different routes. Three initial alloy conditions were considered prior to ECAP deformation: (1) as-cast in solution treated (T4) condition, (2) SLM in T4 condition, (3) SLM subjected to low-temperature annealing. Light microscopy, transmission electron microscopy, X-ray diffraction line broadening analysis, and electron backscattered diffraction analysis were used to characterize the microstructures before and after ECAP. The results indicated that SLM followed by low-temperature annealing led to superior mechanical properties, relative to the two other conditions. Microscopic analyses revealed that the partial-cellular structure contributed to strong work hardening. This behavior enhanced the material’s strength because of the enhanced accumulation of geometrically necessary dislocations during ECAP deformation.

scholarly journals Fast Preparation of High-Performance Wood Materials Assisted by Ultrasonic and Vacuum Impregnation

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 567
Author(s):  
Hong Yang ◽  
Mingyu Gao ◽  
Jinxin Wang ◽  
Hongbo Mu ◽  
Dawei Qi
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Mechanical Tests ◽  
Vacuum Impregnation ◽  
Natural Forests ◽  
Ultrasonic Pretreatment ◽  
Fast Growing ◽  
Before And After ◽  
New Material ◽  
Ft Ir

In the absence of high-quality hardwood timber resources, we have gradually turned our attention from natural forests to planted fast-growing forests. However, fast-growing tree timber in general has defects such as low wood density, loose texture, and poor mechanical properties. Therefore, improving the performance of wood through efficient and rapid technological processes and increasing the utilization of inferior wood is a good way to extend the use of wood. Densification of wood increases the strength of low-density wood and extends the range of applications for wood and wood-derived products. In this paper, the effects of ultrasonic and vacuum pretreatment on the properties of high-performance wood were explored by combining sonication, vacuum impregnation, chemical softening, and thermomechanical treatments to densify the wood; then, the changes in the chemical composition, microstructure, and mechanical properties of poplar wood before and after treatment were analyzed comparatively by FT-IR, XRD, SEM, and mechanical tests. The results showed that with ultrasonic pretreatment and vacuum impregnation, the compression ratio of high-performance wood reached its highest level and the MOR and MOE reached their maximums. With the help of this method, fast-growing softwoods can be easily prepared into dense wood materials, and it is hoped that this new material can be applied in the fields of construction, aviation, and automobile manufacturing.

Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by SLM

2015 ◽  
Vol 651-653 ◽  
pp. 677-682 ◽  
Author(s):  
Anatoliy Popovich ◽  
Vadim Sufiiarov ◽  
Evgenii Borisov ◽  
Igor Polozov
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Phase Composition ◽  
Mechanical Behavior ◽  
Ductile Fracture ◽  
Elevated Temperatures ◽  
Initial Material ◽  
Laser Melting ◽  
Microstructure And Mechanical Properties ◽  
Before And After

The article presents results of a study of phase composition and microstructure of initial material and samples obtained by selective laser melting of titanium-based alloy, as well as samples after heat treatment. The effect of heat treatment on microstructure and mechanical properties of specimens was shown. It was studied mechanical behavior of manufactured specimens before and after heat treatment at room and elevated temperatures as well. The heat treatment allows obtaining sufficient mechanical properties of material at room and elevated temperatures such as increase in ductility of material. The fractography of samples showed that they feature ductile fracture with brittle elements.

Deformation and Fracture Behaviors in the Freestanding APS-TBC - Effects of Process Parameters and Thermal Exposure

2007 ◽  
Vol 353-358 ◽  
pp. 1935-1938 ◽  
Author(s):  
Yasuhiro Yamazaki ◽  
T. Kinebuchi ◽  
H. Fukanuma ◽  
N. Ohno ◽  
K. Kaise
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Gas Turbines ◽  
Thermal Exposure ◽  
Substrate Material ◽  
Process Variables ◽  
Microstructural Investigation ◽  
Deformation And Fracture ◽  
Industrial Gas Turbines ◽  
Tbc Systems

Thermal barrier coatings (TBCs), that reduce the temperature in the underlying substrate material, are an essential requirement for the hot section components of industrial gas turbines. Recently, in order to take full advantage of the potential of the TBC systems, experimental and analytical investigations in TBC systems have been performed. However there is a little information on the deformation behavior of the top coating. In addition, the effects of the thermal exposure and the process parameters on the mechanical properties of the top coating have never been clarified. From these backgrounds, the effects of the process variables in APS and the thermal exposure on the mechanical properties were investigated in order to optimize the APS process of top coatings. The experimental results indicated that the mechanical properties of the APS-TBC, i.e. the tensile strength and the elastic modulus, were significantly changed by the process variables and the long term thermal exposure. The microstructural investigation was also carried out and the relationship between the mechanical properties and the porosity was discussed.

Effect of white spot syndrome virus (WSSV) infection on immune enzyme activity and ultrastructure in the haemolymph tissue of Cherax quadricarinatus (Decapoda, Astacidea)

Crustaceana ◽  
2016 ◽  
Vol 89 (6-7) ◽  
pp. 669-684
Author(s):  
J. J. Ning ◽  
M. M. Zhang ◽  
Q. Q. Tong ◽  
X. Cao ◽  
D. L. Wang ◽  
...  
Keyword(s):  
Enzyme Activities ◽  
White Spot Syndrome Virus ◽  
White Spot ◽  
Immune Protection ◽  
Cell Nuclei ◽  
Cherax Quadricarinatus ◽  
Deformation And Fracture ◽  
Before And After ◽  
Protection Rate ◽  
White Spot Syndrome

To explore the pathogenic mechanism of white spot syndrome virus (WSSV) in crayfish (Cherax quadricarinatus), we analysed activities of the three immune-related enzymes PO, SOD and LSZ in haemolymph tissue ofC. quadricarinatusbefore and after infection, and simultaneously studied the ultrastructural pathology. The results show that WSSV infection affects activities of the three enzymes. After 6-24 h of WSSV infection, the activities of PO, SOD and LSZ increased, but decreased significantly during longer infection times. The enzyme activities in WSSV-infected crayfish were significantly lower than those in controls at 72 h, except for LSZ (). Interestingly, the activities of PO, SOD and LSZ in the group treated with immune-polysaccharides before challenge with WSSV were higher than in the directly infected group, and the immune protection rate reached 51.9%, suggesting that the polysaccharides could improve enzyme activities and enhance antiviral defences of the organism. Ultrastructural pathological changes showed damaged haemolymph tissue, deformed golgiosomes, fuzzy damage in the mitochondrial structures, and nuclear membrane deformation and fracture. High levels of heterochromatin appeared in the nucleus; organoid and chromatin dissolved in dying blood cells, cytoplasm appeared oedematous and cells dissolved. WSSV particles were visible in blood cell nuclei of infected crayfish.

scholarly journals Accuracy and mechanical properties of orthodontic models printed 3-dimensionally from calcium sulfate before and after various postprinting treatments

2016 ◽  
Vol 150 (6) ◽  
pp. 1056-1062 ◽  
Author(s):  
Austin D. Ledingham ◽  
Jeryl D. English ◽  
Sercan Akyalcin ◽  
Benjamin E. Cozad ◽  
Joe C. Ontiveros ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Calcium Sulfate ◽  
Before And After ◽  
Orthodontic Models

Effect of Full- and Small-Scale Reeling Simulation on Mechanical Properties of Weldable 13Cr Seamless Line Pipe

2013 ◽  
Author(s):  
Hidenori Shitamoto ◽  
Nobuyuki Hisamune
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Oil And Gas ◽  
Small Scale ◽  
Line Pipe ◽  
Offshore Pipeline ◽  
Oil And Gas Pipelines ◽  
Before And After ◽  
Offshore Oil And Gas ◽  
Offshore Oil

There are several methods currently being used to install offshore oil and gas pipelines. The reel-lay process is fast and one of the most effective offshore pipeline installation methods for seamless, ERW, and UOE line pipes with outside diameters of 18 inches or less. In the case of the reel-laying method, line pipes are subjected to plastic deformation multiplication during reel-laying. It is thus important to understand the change of the mechanical properties of line pipes before and after reel-laying. Therefore, full-scale reeling (FSR) simulations and small-scale reeling (SSR) simulations are applied as evaluation tests for reel-laying. In this study, FSR simulations were performed to investigate the effect of cyclic deformation on the mechanical properties of weldable 13Cr seamless line pipes. Furthermore, SSR simulations were performed to compare the results obtained by FSR simulations.

Sign in / Sign up

Export Citation Format

Share Document