A novel hybrid composite phononic crystal plate with multiple vibration band gaps at low frequencies

2021 ◽  
pp. 413366
Author(s):  
Peng Zhou ◽  
Shui Wan ◽  
Xiao Wang ◽  
Jundong Fu ◽  
Yingbo Zhu
Keyword(s):  
Hybrid Composite ◽  
Phononic Crystal ◽  
Crystal Plate ◽  
Band Gaps ◽  
Vibration Band ◽  
Low Frequencies

Evidence for complete low-frequency vibration band gaps in a thick elastic steel metamaterial plate

2019 ◽  
Vol 33 (04) ◽  
pp. 1950038 ◽  
Author(s):  
Suobin Li ◽  
Yihua Dou ◽  
Tianning Chen ◽  
Zhiguo Wan ◽  
Jingjing Huang ◽  
...  
Keyword(s):  
Band Gap ◽  
Steel Plate ◽  
Phononic Crystal ◽  
Low Frequency ◽  
Crystal Plate ◽  
Band Gaps ◽  
Formation Mechanisms ◽  
Vibration Band ◽  
Low Frequency Vibration ◽  
Thick Steel

Elastic steel metamaterial plates can be used for noise- and vibration-reduction due to unique physical properties related to their vibration band gap. However, obtaining a complete low-frequency vibration band gap in a thick elastic steel metamaterial plate is difficult. In this paper, we simulate a complete low-frequency vibration band gap in a thick elastic steel metamaterial plate. The structure consists of periodic, double-sided, composite stepped resonators, which were deposited on a 2D locally resonant phononic crystal plate. The phononic crystal plate consists of an array of rubber fillers embedded in a thick steel plate. The dispersion relations, power-transmission spectra, and the displacement fields of the eigenmodes are calculated using the finite-element method. The results show that, for the proposed structure, the opening of the first complete vibration band gap is reduced by a factor of 9.5 compared to a conventional thick elastic steel metamaterial plate. This causes attenuation of low-frequency elastic waves. The formation mechanisms for the vibration band gap are also explored numerically. The results indicate that the formation mechanism for the new low-frequency vibration band gap can be attributed to coupling between a local resonance mode of the composite stepped resonators and the Lamb wave mode of the thick steel-plate. The location of the vibration band gap is determined by the resonator mode of the composite stepped resonators. The vibration band gap effects of the composite stepped resonators are also investigated in this paper. We find that the location of the complete vibration band gaps can be modulated with a relatively low frequency using different composite stepped resonators. Such an elastic steel metamaterial plate with a complete low-frequency vibration band gap can be used to reduce both vibration and noise in various commercial and research applications.

Vibration band gaps in double-vibrator pillared phononic crystal plate

2016 ◽  
Vol 119 (1) ◽  
pp. 014903 ◽  
Author(s):  
Hao-Jiang Zhao ◽  
Hong-Wei Guo ◽  
Ming-Xing Gao ◽  
Rong-Qiang Liu ◽  
Zong-Quan Deng
Keyword(s):  
Phononic Crystal ◽  
Crystal Plate ◽  
Band Gaps ◽  
Vibration Band

Flexural vibration band gaps in a double-side phononic crystal plate

2015 ◽  
Vol 118 (4) ◽  
pp. 044906 ◽  
Author(s):  
Hao-Jiang Zhao ◽  
Hong-Wei Guo ◽  
Bing-Yan Li ◽  
Zong-Quan Deng ◽  
Rong-Qiang Liu
Keyword(s):  
Phononic Crystal ◽  
Flexural Vibration ◽  
Crystal Plate ◽  
Band Gaps ◽  
Vibration Band

Flexural Vibration Band Gaps in a Ternary Phononic Crystal Thin Plate

2011 ◽  
Vol 675-677 ◽  
pp. 1085-1088
Author(s):  
Zong Jian Yao ◽  
Gui Lan Yu ◽  
Jian Bao Li
Keyword(s):  
Band Gap ◽  
Thin Plate ◽  
Mass Density ◽  
Phononic Crystal ◽  
Flexural Vibration ◽  
Expansion Method ◽  
Band Gaps ◽  
Physical Parameters ◽  
Vibration Band ◽  
Filling Fraction

The band structures of flexural waves in a ternary locally resonant phononic crystal thin plate are studied using the improved plane wave expansion method. And the thin concrete plate composed of a square array of steel cylinders hemmed around by rubber is considered here. Absolute band gaps of flexural vibration with low frequency are shown. The calculation results show that the band gap width is strongly dependent on the filling fraction, the radius ratio, the mass density and the Young’s modulus contrasts between the core and the coating. So by changing these physical parameters, the required band gap could be obtained.

Effects of rotated square inserts on the longitudinal vibration band gaps in thin phononic crystal plates

2015 ◽  
Vol 29 (20) ◽  
pp. 1550105
Author(s):  
Haojiang Zhao ◽  
Rongqiang Liu ◽  
Chuang Shi ◽  
Hongwei Guo ◽  
Zongquan Deng
Keyword(s):  
Plane Wave ◽  
Longitudinal Vibration ◽  
Phononic Crystal ◽  
Expansion Method ◽  
Band Gaps ◽  
Vibration Band ◽  
Plane Wave Expansion ◽  
Plane Wave Expansion Method ◽  
Filling Fraction ◽  
Gap Width

Longitudinal vibration of thin phononic crystal plates with a hybrid square-like array of square inserts is investigated. The plane wave expansion method is used to calculate the vibration band structure of the plate. Numerical results show that rotated square inserts can open several vibration gaps, and the band structures are twisted because of the rotation of inserts. Filling fraction and material of the insert affect the change law of the gap width versus the rotation angles of square inserts.

Low-frequency band gaps in one-dimensional thin phononic crystal plate with periodic stubbed surface

2011 ◽  
Vol 406 (11) ◽  
pp. 2249-2253 ◽  
Author(s):  
Yuanwei Yao ◽  
Zhilin Hou ◽  
Fugen Wu ◽  
Xin Zhang
Keyword(s):  
Frequency Band ◽  
Phononic Crystal ◽  
Low Frequency ◽  
Crystal Plate ◽  
Band Gaps ◽  
One Dimensional

scholarly journals Study on Lamb Waves in a Composite Phononic Crystal Plate

Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 799
Author(s):  
Lili Yuan ◽  
Peng Zhao ◽  
Yong Ding ◽  
Benjie Ding ◽  
Jianke Du ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Band Gap ◽  
Vibration Isolation ◽  
Lamb Waves ◽  
Phononic Crystal ◽  
Volume Ratio ◽  
Geometric Parameters ◽  
Crystal Plate ◽  
Band Gaps ◽  
Frequency Range

In the paper, a phononic crystal plate composed of a magnetorheological elastomer with adjustable band gaps in the low frequency range is constructed. The dispersion relations of Lamb waves are studied by the supercell plane wave expansion method. The transmission responses as well as the displacement fields of Lamb waves are calculated by the finite element method. The influence of geometric parameters on the band gaps, the regulation effect of the volume ratio of Fe particles and the bias magnetic field on the band gaps are analyzed. Based on the numerical results, we find that the volume ratio of Fe particles and the magnetic field affect the band gap effectively. The location and width of the band gaps can be adjusted within a broad frequency range by varying the geometric parameters and magnetic field. We can control the band gap, achieve an appropriate and wide low band gap by selecting proper geometric parameters and applying an external contactless magnetic field to deal with complicated and changeable engineering environment. The results are useful for understanding and optimizing the design of composite vibration isolation plates.

Thermal Tuning of Vibration Band Gaps in Thin Phononic Crystal Plates with Nitinol

2014 ◽  
Vol 597 ◽  
pp. 78-83 ◽  
Author(s):  
Hao Jiang Zhao ◽  
Rong Qiang Liu ◽  
Hong Wei Guo
Keyword(s):  
Plane Wave ◽  
Phononic Crystal ◽  
Band Gaps ◽  
Vibration Band ◽  
Plane Wave Expansion ◽  
Band Structures ◽  
Filling Fraction ◽  
Wave Expansion ◽  
Square Array ◽  
Thermal Tuning

Vibration band structures of thin phononic crystal plates (PCPs) with square array and graphite array of nitinol inserts are calculated by the plane wave expansion (PWE) method. The influences of filling fraction are considered when investigating the effects of the varying temperature on the band gaps. Vibration band gaps of these PCPs can be tuned by changing temperature. This study will be useful in designing PCPs with tunable gaps.

Sign in / Sign up

Export Citation Format

Share Document