Yield strength and dislocation mobility in plastically deformed ZnSe

2006 ◽  
Vol 376-377 ◽  
pp. 771-774 ◽  
Author(s):  
I. Yonenaga ◽  
K. Watanabe ◽  
S. Itoh ◽  
S. Fujiwara ◽  
K. Yoshino
Keyword(s):  
Yield Strength ◽  
Dislocation Mobility

Evaluation of Dislocation Mobility in Wurtzite Semiconductors

2015 ◽  
Vol 1741 ◽  
Author(s):  
Ichiro Yonenaga
Keyword(s):  
Activation Energy ◽  
Yield Strength ◽  
Basic Mechanism ◽  
Dislocation Motion ◽  
Minimum Length ◽  
Indentation Hardness ◽  
Dislocation Mobility ◽  
Dislocation Energy ◽  
Dislocation Process ◽  
Individual Dislocation

ABSTRACTThe indentation hardness and yield strength of various wurtzite-structured semiconductors, such as AlN, GaN, InN, and ZnO, were summarized together with those of 6H-SiC. From analysis of the data, the activation energy for motion of an individual dislocation was deduced to be 2–2.7 and 0.7–1.2 eV in GaN and ZnO, respectively, and the evaluated activation energy for dislocation motion showed a dependence on the dislocation energy in the minimum length. The results were evaluated in terms of homology and the basic mechanism of the dislocation process. Dislocation motion is thought to be primarily controlled by the atomic bonding character of the semiconductors.

Electron microscope studies of the plastic deformation of ternary alloys based on GaAs

1990 ◽  
Vol 48 (4) ◽  
pp. 1120-1120
Author(s):  
R. Haswell ◽  
U. Bangert ◽  
P. Charsley
Keyword(s):  
Plastic Deformation ◽  
Electron Microscope ◽  
Room Temperature ◽  
Stacking Faults ◽  
The Other ◽  
Ternary Alloys ◽  
Dislocation Mobility ◽  
Semiconducting Materials ◽  
Micro Indentation

A knowledge of the behaviour of dislocations in semiconducting materials is essential to the understanding of devices which use them . This work is concerned with dislocations in alloys related to the semiconductor GaAs . Previous work on GaAs has shown that microtwinning occurs on one of the <110> rosette arms after indentation in preference to the other . We have shown that the effect of replacing some of the Ga atoms by Al results in microtwinning in both of the rosette arms.In the work to be reported dislocations in specimens of different compositions of Gax Al(1-x) As and Gax In(1-x) As have been studied by using micro indentation on a (001) face at room temperature . A range of electron microscope techniques have been used to investigate the type of dislocations and stacking faults/microtwins in the rosette arms , which are parallel to the [110] and [10] , as a function of composition for both alloys . Under certain conditions microtwinning occurs in both directions . This will be discussed in terms of the dislocation mobility.

Evaluation of an Alternate Method for Determining Yield Strength Offset Values for Selective Laser Sintered Polymeric Materials

2019 ◽  
Author(s):  
Chelsey Henry ◽  
Keith Rupel ◽  
Charles Park ◽  
Joseph Costanzo ◽  
Cary Kaczowka ◽  
...  
Keyword(s):  
Yield Strength ◽  
Polymeric Materials

Influence of Yield Strength Variability over Cross-Section to Steel Beam Load-Carrying Capacity

2005 ◽  
Vol 10 (2) ◽  
pp. 151-160 ◽  
Author(s):  
J. Kala ◽  
Z. Kala
Keyword(s):  
Yield Strength ◽  
Cross Section ◽  
Carrying Capacity ◽  
Bending Moment ◽  
Statistical Characteristics ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Strength Variability ◽  
Hot Rolled ◽  
Hot Rolled Steel

Authors of article analysed influence of variability of yield strength over cross-section of hot rolled steel member to its load-carrying capacity. In calculation models, the yield strength is usually taken as constant. But yield strength of a steel hot-rolled beam is generally a random quantity. Not only the whole beam but also its parts have slightly different material characteristics. According to the results of more accurate measurements, the statistical characteristics of the material taken from various cross-section points (e.g. from a web and a flange) are, however, more or less different. This variation is described by one dimensional random field. The load-carrying capacity of the beam IPE300 under bending moment at its ends with the lateral buckling influence included is analysed, nondimensional slenderness according to EC3 is λ¯ = 0.6. For this relatively low slender beam the influence of the yield strength on the load-carrying capacity is large. Also the influence of all the other imperfections as accurately as possible, the load-carrying capacity was determined by geometrically and materially nonlinear solution of very accurate FEM model by the ANSYS programme.

Sign in / Sign up

Export Citation Format

Share Document