Water-oil interfacial tension (IFT) reduction and wettability alteration in surfactant flooding process using extracted saponin from Anabasis Setifera plant

2020 ◽  
Vol 189 ◽  
pp. 106901 ◽  
Author(s):  
Iman Nowrouzi ◽  
Amir H. Mohammadi ◽  
Abbas Khaksar Manshad
Keyword(s):  
Interfacial Tension ◽  
Wettability Alteration ◽  
Surfactant Flooding ◽  
Anabasis Setifera

scholarly journals Experimental study of combined low salinity and surfactant flooding effect on oil recovery

2020 ◽  
Vol 76 ◽  
pp. 4
Author(s):  
Abdulmecit Araz ◽  
Farad Kamyabi
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
High Salinity ◽  
Wettability Alteration ◽  
Moderate Increase ◽  
Surfactant Flooding ◽  
Improved Oil Recovery ◽  
Oil Saturation ◽  
Low Salinity ◽  
Salinity Water

A new generation improved oil recovery methods comes from combining techniques to make the overall process of oil recovery more efficient. One of the most promising methods is combined Low Salinity Surfactant (LSS) flooding. Low salinity brine injection has proven by numerous laboratory core flood experiments to give a moderate increase in oil recovery. Current research shows that this method may be further enhanced by introduction of surfactants optimized for lowsal environment by reducing the interfacial tension. Researchers have suggested different mechanisms in the literature such as pH variation, fines migration, multi-component ionic exchange, interfacial tension reduction and wettability alteration for improved oil recovery during lowsal injection. In this study, surfactant solubility in lowsal brine was examined by bottle test experiments. A series of core displacement experiments was conducted on nine crude oil aged Berea core plugs that were designed to determine the impact of brine composition, wettability alteration, Low Salinity Water (LSW) and LSS flooding on Enhancing Oil Recovery (EOR). Laboratory core flooding experiments were conducted on the samples in a heating cabinet at 60 °C using five different brine compositions with different concentrations of NaCl, CaCl2 and MgCl2. The samples were first reached to initial water saturation, Swi, by injecting connate water (high salinity water). LSW injection followed by LSS flooding performed on the samples to obtain the irreducible oil saturation. The results showed a significant potential of oil recovery with maximum additional recovery of 7% Original Oil in Place (OOIP) by injection of LS water (10% LS brine and 90% distilled water) into water-wet cores compared to high salinity waterflooding. It is also concluded that oil recovery increases as wettability changes from water-wet to neutral-wet regardless of the salinity compositions. A reduction in residual oil saturation, Sor, by 1.1–4.8% occurred for various brine compositions after LSS flooding in tertiary recovery mode. The absence of clay swelling and fine migration has been confirmed by the stable differential pressure recorded for both LSW and LSS flooding. Aging the samples at high temperature prevented the problem of fines production. Combined LSS flooding resulted in an additional oil recovery of 9.2% OOIP when applied after LSW flooding. Surfactants improved the oil recovery by reducing the oil-water interfacial tension. In addition, lowsal environment decreased the surfactant retention, thus led to successful LSS flooding. The results showed that combined LSS flooding may be one of the most promising methods in EOR. This hybrid improved oil recovery method is economically more attractive and feasible compared to separate low salinity waterflooding or surfactant flooding.

scholarly journals Effect of Environment-Friendly Non-Ionic Surfactant on Interfacial Tension Reduction and Wettability Alteration; Implications for Enhanced Oil Recovery

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3988 ◽  
Author(s):  
Omid Haghighi ◽  
Ghasem Zargar ◽  
Abbas Khaksar Manshad ◽  
Muhammad Ali ◽  
Mohammad Takassi ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Co2 Storage ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Ionic Surfactant ◽  
Surfactant Flooding ◽  
Core Flooding ◽  
Environment Friendly ◽  
Reservoir Rocks

Production from mature oil reservoirs can be optimized by using the surfactant flooding technique. This can be achieved by reducing oil and water interfacial tension (IFT) and modifying wettability to hydrophilic conditions. In this study, a novel green non-ionic surfactant (dodecanoyl-glucosamine surfactant) was synthesized and used to modify the wettability of carbonate reservoirs to hydrophilic conditions as well as to decrease the IFT of hydrophobic oil–water systems. The synthesized non-ionic surfactant was characterized by Fourier transform infrared spectroscopy (FTIR) and chemical shift nuclear magnetic resonance (HNMR) analyses. Further pH, turbidity, density, and conductivity were investigated to measure the critical micelle concentration (CMC) of surfactant solutions. The result shows that this surfactant alters wettability from 148.93° to 65.54° and IFT from 30 to 14 dynes/cm. Core-flooding results have shown that oil recovery was increased from 40% (by water flooding) to 59% (by surfactant flooding). In addition, it is identified that this novel non-ionic surfactant can be used in CO2 storage applications due to its ability to alter the hydrophobicity into hydrophilicity of the reservoir rocks.

scholarly journals Mechanism of active silica nanofluids based on interface-regulated effect during spontaneous imbibition

2021 ◽  
Author(s):  
Xu-Guang Song ◽  
Ming-Wei Zhao ◽  
Cai-Li Dai ◽  
Xin-Ke Wang ◽  
Wen-Jiao Lv
Keyword(s):  
Contact Angle ◽  
Interfacial Tension ◽  
Oil Recovery ◽  
Dynamic Contact Angle ◽  
Liquid Interface ◽  
Spontaneous Imbibition ◽  
Wettability Alteration ◽  
Low Permeability ◽  
Oil Water ◽  
Solid Liquid

AbstractThe ultra-low permeability reservoir is regarded as an important energy source for oil and gas resource development and is attracting more and more attention. In this work, the active silica nanofluids were prepared by modified active silica nanoparticles and surfactant BSSB-12. The dispersion stability tests showed that the hydraulic radius of nanofluids was 58.59 nm and the zeta potential was − 48.39 mV. The active nanofluids can simultaneously regulate liquid–liquid interface and solid–liquid interface. The nanofluids can reduce the oil/water interfacial tension (IFT) from 23.5 to 6.7 mN/m, and the oil/water/solid contact angle was altered from 42° to 145°. The spontaneous imbibition tests showed that the oil recovery of 0.1 wt% active nanofluids was 20.5% and 8.5% higher than that of 3 wt% NaCl solution and 0.1 wt% BSSB-12 solution. Finally, the effects of nanofluids on dynamic contact angle, dynamic interfacial tension and moduli were studied from the adsorption behavior of nanofluids at solid–liquid and liquid–liquid interface. The oil detaching and transporting are completed by synergistic effect of wettability alteration and interfacial tension reduction. The findings of this study can help in better understanding of active nanofluids for EOR in ultra-low permeability reservoirs.

Numerical effects on the simulation of surfactant flooding for enhanced oil recovery

2021 ◽  
Author(s):  
Olaitan Akinyele ◽  
Karl D. Stephen
Keyword(s):  
Interfacial Tension ◽  
Cell Size ◽  
Oil Recovery ◽  
Flow In Porous Media ◽  
Numerical Dispersion ◽  
Sharp Change ◽  
Surfactant Flooding ◽  
Fractional Flow ◽  
Time Step ◽  
Scale Models

Abstract Numerical simulation of surfactant flooding using conventional reservoir simulation models can lead to unreliable forecasts and bad decisions due to the appearance of numerical effects. The simulations give approximate solutions to systems of nonlinear partial differential equations describing the physical behavior of surfactant flooding by combining multiphase flow in porous media with surfactant transport. The approximations are made by discretization of time and space which can lead to spurious pulses or deviations in the model outcome. In this work, the black oil model was simulated using the decoupled implicit method for various conditions of reservoir scale models to investigate behaviour in comparison with the analytical solution obtained from fractional flow theory. We investigated changes to cell size and time step as well as the properties of the surfactant and how it affects miscibility and flow. The main aim of this study was to understand pulse like behavior that has been observed in the water bank to identify cause and associated conditions. We report for the first time that the pulses occur in association with the simulated surfactant water flood front and are induced by a sharp change in relative permeability as the interfacial tension changes. Pulses are diminished when the adsorption rate was within the value of 0.0002kg/kg to 0.0005kg/kg. The pulses are absent for high resolution model of 5000 cells in x direction with a typical cell size as used in well-scale models. The growth or damping of these pulses may vary from case to case but in this instance was a result of the combined impact of relative mobility, numerical dispersion, interfacial tension and miscibility. Oil recovery under the numerical problems reduced the performance of the flood, due to large amounts of pulses produced. Thus, it is important to improve existing models and use appropriate guidelines to stop oscillations and remove errors.

Effect of 2D Alpha-Zirconium Phosphate Nanosheets in Interfacial Tension Reduction and Wettability Alteration: Implications for Enhanced Oil Recovery

SPE Journal ◽  
2022 ◽  
pp. 1-13
Author(s):  
Song Qing ◽  
Hong Chen ◽  
Li-juan Han ◽  
Zhongbin Ye ◽  
Yihao Liao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Interfacial Tension ◽  
Oil Recovery ◽  
Zirconium Phosphate ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Wettability Alteration ◽  
Tetrabutylammonium Hydroxide ◽  
Transmission Electron ◽  
2D Nanosheets

Summary α-Zirconium phosphate (α-ZrP) nanocrystals were synthesized by refluxing method and subsequently exfoliated into extremely thin 2D nanosheets by tetrabutylammonium hydroxide (TBAOH) solution. Dynamic light scattering, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to characterize the size distribution and morphology of α-ZrP nanosheets. Interfacial tension (IFT) and contact angle measurement were conducted by different concentrations of α-ZrP nanosheets solutions. The results displayed that the wettability of porous media surface was altered from oleophilic to hydrophilic and the IFT decreased with the increasing of α-ZrP nanosheets concentrations. A new method was proposed to calculate the Hamaker constant for 2D α-ZrP nanosheets. The calculated results displayed that α-ZrP nanosheets were not easy to agglomerate under experimental environment and when the interaction energy barrier increased, the transport amount of α-ZrP nanosheets also increased. Coreflooding tests were also performed with various concentrations and the oil recovery efficiency increased from 33.59 to 51.26% when α-ZrP nanosheets concentrations increased from 50 to 1,000 ppm.

Development of surface treated nanosilica for wettability alteration and interfacial tension reduction

2018 ◽  
Vol 39 (10) ◽  
pp. 1469-1475 ◽  
Author(s):  
Afaque Ahmed ◽  
Ismail Mohd Saaid ◽  
Rashidah M Pilus ◽  
Abdelazim Abbas Ahmed ◽  
Abdul Haque Tunio ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Wettability Alteration ◽  
Tension Reduction
Sign in / Sign up

Export Citation Format

Share Document