scholarly journals Evaluation of 3D Surface Roughness Parameters of EDM Components Using Vision System

2014 ◽  
Vol 5 ◽  
pp. 2132-2141 ◽  
Author(s):  
D.M. Shivanna ◽  
M.B. Kiran ◽  
S.D. Kavitha
Keyword(s):  
Surface Roughness ◽  
Vision System ◽  
Roughness Parameters ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
3D Surface Roughness

EVALUATION OF SURFACE ROUGHNESS PRODUCED BY NANOCUTTING COPPER STRUCTURE USING A LEAST SQUARE MEAN METHOD

2019 ◽  
Vol 27 (01) ◽  
pp. 1950081 ◽  
Author(s):  
CHUNHUI JI ◽  
SHUANGQIU SUN ◽  
BIN LIN ◽  
TIANYI SUI
Keyword(s):  
Surface Roughness ◽  
Cutting Speed ◽  
Least Square ◽  
Depth Of Cut ◽  
Real Surface ◽  
Roughness Parameters ◽  
Machined Surface ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
3D Surface Roughness

This work performed molecular dynamic simulations to study the 2D profile and 3D surface topography in the nanometric cutting process. The least square mean method was used to model the evaluation criteria for the surface roughness at the nanometric scale. The result showed that the cutting speed was the most important factor influencing the spacing between the peaks, the sharpness of the peaks, and the randomness of the profile. The plastic deformation degree of the machined surface at the nanometric scale was significantly influenced by the cutting speed and depth of cut. The 2D and 3D surface roughness parameters exhibited a similar variation tendency, and the parameters Ra and Rq tended to increase gradually with an increase in the cutting speed and a decrease in the depth of cut. Finally, it is concluded that at the nanometric scale, the 3D surface roughness parameters could more accurately reflect the real surface characteristics than the 2D parameters.

Wear Estimation Using 3D Surface Roughness Parameters

2012 ◽  
Vol 527 ◽  
pp. 167-172 ◽  
Author(s):  
Oskars Linins ◽  
Juris Krizbergs ◽  
Irina Boiko
Keyword(s):  
Surface Roughness ◽  
Wear Intensity ◽  
Lifetime Prediction ◽  
Linear Wear ◽  
Elastic Contact ◽  
Roughness Parameters ◽  
New Approach ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
3D Surface Roughness

The aim of this work is to propose a methodology of lifetime prediction of details by new approach for linear wear intensity determination using 3D surface roughness parameters. For qualitative evaluation of the wear process the linear wear intensity (Ih), which may be determined separately for the plastic and elastic contact, is commonly used. Since the elastic contact is mainly required in pairs of details in mechanical engineering in these paper this kind of contact was examined. In our research, the random surface model was used. The surface machined with abrasive instruments (grinding, polishing, honing, etc) has the irregular shape of surface roughness, which can be described with random function. Irregular surface is expressed by a random field h(x, y) of two variables x and y which are Cartesian coordinates of a surfaces point, where the height of roughness asperity h(x, y) has a normal probability distribution. In wear research the probability theory was used. Further in deformed volume calculation, as well as in determination of the length of the surface’s contact the 3D surface roughness parameters were used. The strong correlation between 3D roughness parameters Sa (arithmetic mean height) and Str=Rsm1/Rsm2 (texture aspect ratio of the surface) was revealed. As a result of research, the methodology of lifetime prediction of details by new approach for linear wear intensity determination using 3D surface roughness parameters was elaborated and proposed. After calculation of linear wear intensity Ih, it is possible to estimate lifetime of wearing details. So, at a first time in wear estimation the 3D surface roughness parameters were used. The results of this work have wide practical application, for example in design, texture specification on drawings etc.

Contact Estimation Using 3D Surface Roughness Parameters

2016 ◽  
Vol 721 ◽  
pp. 373-377
Author(s):  
Armands Leitans ◽  
Oskars Linins ◽  
Irina Boiko
Keyword(s):  
Surface Roughness ◽  
Friction Coefficient ◽  
Surface Model ◽  
Roughness Parameters ◽  
Random Surface ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
Normal Probability ◽  
3D Surface Roughness ◽  
Normal Probability Distribution

This work is devoted to the elaboration of the new methodology for the wear parts contact estimation using 3D surface roughness parameters defined in the standard ISO 25178-2:2012 for friction and wear rate determination. In our research the random surface model was used, where the height of surface asperities h (x,y) has a normal probability distribution. As a result of research the equations for estimation of the elastic contact area and friction coefficient were derived. The existence of the correlation between friction coefficient and 3D surface roughness parameters was proven as well. The results of this work could have wide practical application, for example in design, for the texture specification on drawings, calculation of load, etc.

scholarly journals Evaluation of Surface Roughness and Defect Formation after The Machining of Sintered Aluminum Alloy AlSi10Mg

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1662
Author(s):  
Grzegorz Struzikiewicz ◽  
Andrzej Sioma
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Defect Formation ◽  
Laser Sintering ◽  
Material Surface ◽  
Roughness Parameters ◽  
Nose Radius ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
3D Surface Roughness

This article presents selected issues related to the workpiece surface quality after machining by the laser sintering of AlSi10MG alloy powder. The surfaces of the workpiece were prepared and machined by longitudinal turning with tools made of sintered carbides. The occurrence of breaches on the machined material surface was found, which negatively influence the values of 3D surface roughness parameters. The occurring phenomena were analyzed and proposals for their explanation were made. Guidelines for the machining of workpieces achieved by the laser sintering of powders were developed. The lowest value of the 3D roughness parameters was obtained for f = 0.06 mm/rev, ap = 0.5–1.0 mm, and for the nose radius of cutting insert rε = 0.8 mm. The results of research on the effect of cutting parameters on the values of parameters describing the surface quality are presented. Topography measurements and 3D surface roughness parameters are presented, as well as the results of a microscopic 3D surface analysis. Taguchi’s method was used in the research methodology.

scholarly journals Determination of 3D Surface Roughness Parameters by Cross-Section Method

2014 ◽  
Vol 51 (2) ◽  
pp. 60-64
Author(s):  
J. Rudzitis ◽  
J. Krizbergs ◽  
M. Kumermanis ◽  
N. Mozga ◽  
A. Ancans ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Cross Section ◽  
Rough Surfaces ◽  
Three Dimensions ◽  
Roughness Parameters ◽  
Mean Values ◽  
Surface Roughness Parameters ◽  
3D Surface ◽  
3D Surface Roughness ◽  
Cross Section Profile

Abstract Currently, in the production engineering the surface roughness parameters are estimated in three dimensions, however, the equipment for these measurements is rather expensive and not always available. In many cases to buy such equipment is not economically justified. Therefore, the 3D surface roughness parameters are usually determined from the well-known 2D profile ones using the existing 2D equipment. This could be done best using the cross-section (or profile) method, especially in the case of nanoroughness estimation, with calculation of the mean values for the roughness height, spacing, and shape. This method - though mainly meant for irregular rough surfaces - can also be used for other types of rough surfaces. Particular emphasis is here given to the correlation between the surface cross-section (profile) parameters and 3D parameters as well as to the choice of the number of cross-cuttings and their orientation on the surface.

Sign in / Sign up

Export Citation Format

Share Document