Comparison of Straight Line to Conformal Cooling Channel in Injection Molding

2017 ◽  
Vol 4 (2) ◽  
pp. 1167-1173 ◽  
Author(s):  
G. Venkatesh ◽  
Y. Ravi Kumar ◽  
G. Raghavendra
Keyword(s):  
Injection Molding ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Conformal Cooling ◽  
Straight Line

scholarly journals Improving Cooling Performance of Injection Molding Tool with Conformal Cooling Channel by Adding Hybrid Fillers

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1224
Author(s):  
Chil-Chyuan Kuo ◽  
Wei-Hua Chen
Keyword(s):  
Thermal Conductivity ◽  
Injection Molding ◽  
Cooling Time ◽  
Performance Ratio ◽  
Cooling Efficiency ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Conformal Cooling ◽  
Fused Deposition ◽  
Silicone Rubber Mold

Silicone rubber mold (SRM) is capable of reducing the cost and time in a new product development phase and has many applications for the pilot runs. Unfortunately, the SRM after injection molding has a poor cooling efficiency due to its low thermal conductivity. To improve the cooling efficiency, the thermal conductivity of the SRM was improved by adding fillers into the SRM. An optimal recipe for fabricating a high cooling efficiency low-pressure injection mold with conformal cooling channel fabricated by fused deposition modeling technology was proposed and implemented. This study proposes a recipe combining 52.6 wt.% aluminum powder, 5.3 wt.% graphite powder, and 42.1 wt.% liquid silicon rubber can be used to make SRM with excellent cooling efficiency. The price–performance ratio of this SRM made by the proposed recipe is around 55. The thermal conductivity of the SRM made by the proposed recipe can be increased by up to 77.6% compared with convention SRM. In addition, the actual cooling time of the injection molded product can be shortened up to 69.1% compared with the conventional SRM. The actual cooling time obtained by the experiment is in good agreement with the simulation results with the relative error rate about 20%.

Fabrication of circular cooling channels by cold metal transfer based wire and arc additive manufacturing

2021 ◽  
pp. 095440542199561
Author(s):  
Shaohua Han ◽  
Zhongzhong Zhang ◽  
Pengxiang Ruan ◽  
Shiwen Cheng ◽  
Dingqi Xue
Keyword(s):  
Additive Manufacturing ◽  
High Energy ◽  
Cooling Effect ◽  
High Deposition Rate ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Conformal Cooling ◽  
Energy Beam ◽  
Cooling Channels ◽  
Straight Line

Additive manufacturing has been proven to be a promising technology for fabricating high-performance dies, molds, and conformal cooling channels. As one of the manufacturing methods, wire and arc additive manufacturing displays unique advantages of low cost and high deposition rate that are better than other high energy beam-based ones. This paper presents a preliminary study of fabricating integrated cooling channels by CMT-based wire and arc additive manufacturing process. The deposition strategies for fabricating circular cross-sectional cooling channels both in conformal and straight-line patterns have been investigated. It included optimizing the welding torch angle, fabricating the enclosed semicircle structure and predicting the collision between the torch and constructed part. The cooling effect test was also conducted on both the conformal cooling channel and straight-line cooling channel. The results affirmed a higher cooling efficiency and better uniform cooling effect of the conformal cooling channel than straight-line cooling channel.

scholarly journals COOLING UNIFORMITY ANALYSIS of INJECTION MOLDING PLASTIC PRODUCTS WITH COOLING SYSTEM VARIATIONS USING CFD METHOD

2020 ◽  
Vol 25 (2) ◽  
Author(s):  
Angger Bagus Prasetiyo
Keyword(s):  
Injection Molding ◽  
Cooling System ◽  
Maximum Temperature ◽  
Mold Material ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Channel System ◽  
Conformal Cooling ◽  
Cfd Method ◽  
Plastic Products

The cooling system design selection plays an important role in a product cooling process in injection molding. This study presents an analysis of the uniform cooling of plastic products with a variety of cooling systems using the CFD method. Good cooling design, able to uniform the temperature drop in plastic products. There are two types of cooling system variations used, namely the conformal cooling channel system and the straight cooling channel system using the volume of fluid model with the k-epsilon turbulent model. The mold material used is steel and the plastic material used is polypropylene. The simulation results using the CFD method show that the variations in the conformal cooling channel system resulting from a decrease in temperature for each product are more uniform, as evidenced by the color of the contour experiencing light green degradation on all sides of the product, the maximum temperature value is 422, 44 ° K and the minimum temperature value is 338. , 00 ° K, while the straight cooling channel system has a non-uniform temperature reduction, as evidenced by the value with the contour color that is still orange, the maximum temperature value is 473.11 ° K.

An Outline of Methods in Machining Curved Hole

2011 ◽  
Vol 328-330 ◽  
pp. 181-185
Author(s):  
Ying Ping Qian ◽  
Yin He ◽  
Ju Hua Huang ◽  
Xi Zhi Zhou
Keyword(s):  
Injection Molding ◽  
Cooling Effect ◽  
Cooling Channel ◽  
Conformal Cooling Channel ◽  
Rapid Cooling ◽  
Conformal Cooling ◽  
Cooling Stage ◽  
Curved Hole

Cooling stage is a key stage of injection molding. It affects both the quality and efficiency of injection molding of products. Conformal cooling channel, due to its advantages in uniform cooling and rapid cooling, could improve the cooling effect obviously. Therefore, study on methods of machining curved hole are proposed to be used for practice. In this thesis, some methods of machining curved hole and their features in general were introduced.

Sign in / Sign up

Export Citation Format

Share Document