Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete

2012 ◽  
Vol 34 ◽  
pp. 325-331 ◽  
Author(s):  
Mahdi Shariati ◽  
N.H. Ramli Sulong ◽  
M.M. Arabnejad Khanouki
Keyword(s):  
Cyclic Loading ◽  
High Strength Concrete ◽  
High Strength ◽  
Experimental Assessment ◽  
Reversed Cyclic Loading ◽  
Strength Concrete ◽  
Shear Connectors ◽  
Reversed Cyclic

Bond behavior of high strength concrete under reversed pull-out cyclic loading

2002 ◽  
Vol 29 (2) ◽  
pp. 191-200 ◽  
Author(s):  
M Alavi-Fard ◽  
H Marzouk
Keyword(s):  
Cyclic Loading ◽  
Bond Strength ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Displacement Curve ◽  
Bond Slip ◽  
Strength Concrete ◽  
Pull Out ◽  
Normal Strength

Structures located in seismic zones require significant ductility. It is necessary to examine the bond slip characteristics of high strength concrete under cyclic loading. The cyclic bond of high strength concrete is investigated under different parameters, including load history, confining reinforcement, bar diameter, concrete strength, and the rate of pull out. The bond strength, cracking, and deformation are highly dependent on the bond slip behavior between the rebar and the concrete under cyclic loading. The results of cyclic testing indicate that an increase in cyclic displacement will lead to more severe bond damage. The slope of the bond stress – displacement curve can describe the influence of the rate of loading on the bond strength in a cyclic test. Specimens with steel confinement sustained a greater number of cycles than the specimens without steel confinement. It has been found that the maximum bond strength increases with an increase in concrete strength. Cyclic loading does not affect the bond strength of high strength concrete as long as the cyclic slip is less than the maximum slip for monotonic loading. The behavior of high strength concrete under a cyclic load is slightly different from that of normal strength concrete.Key words: bond, high strength, cyclic loading, bar spacing, loading rate, failure mechanism.

scholarly journals Cyclical Behavior of Concrete-Encased Composite Frame Joints with High Strength Concrete

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Lei Zeng ◽  
Zhenkun Cui ◽  
Yunfeng Xiao ◽  
Siqian Jin ◽  
Yuanyuan Wu
Keyword(s):  
Cyclic Loading ◽  
High Strength Concrete ◽  
Joint Strength ◽  
Concrete Strength ◽  
Outer Part ◽  
High Strength ◽  
Crack Pattern ◽  
Experimental Program ◽  
Strength Concrete ◽  
Composite Frame

This paper presents an application of high strength concrete to concrete-encased composite frame building based on an experimental program. The work emphasized joints behavior under reverse cyclic loading caused by earthquakes to provide information for seismic design. To investigate the internal mechanisms and seismic performance, cyclic loading tests were carried out on five half-scale interior joints. Two design variables were addressed in the research: concrete strength and axial column load. Frame joints performance including crack pattern, failure mode, deformation, ductility, strain distribution, and energy dissipation capacity was investigated. It was found that all joint specimens behaved in a manner with joint panel shear failure. Using high strength concrete increased the joint strength and had relatively little effect on the stiffness and ductility. The axial column load helped the joint strength by better mobilizing the outer part of the joint, but it had an obvious influence on the ductility and energy-dissipating capacity, which can be improved by providing enough transverse reinforcement. A typical crack pattern was also provided which can well reflect mechanical character and damage process. This research should contribute to the future engineering applications of high strength concrete to concrete-encased composite structure.

Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete

2014 ◽  
Vol 41 ◽  
pp. 124-134 ◽  
Author(s):  
Mahdi Shariati ◽  
Ali Shariati ◽  
N.H. Ramli Sulong ◽  
Meldi Suhatril ◽  
M.M. Arabnejad Khanouki
Keyword(s):  
Energy Dissipation ◽  
Failure Analysis ◽  
High Strength Concrete ◽  
High Strength ◽  
Strength Concrete ◽  
Shear Connectors

Beam-column behaviour of steel tubes filled with high strength concrete

1994 ◽  
Vol 21 (2) ◽  
pp. 207-218 ◽  
Author(s):  
Helmut G. L. Prion ◽  
Jens Boehme
Keyword(s):  
Cyclic Loading ◽  
High Strength Concrete ◽  
High Strength ◽  
Test Results ◽  
Loading Test ◽  
Steel Tubes ◽  
Strength Concrete ◽  
Main Emphasis ◽  
Thin Steel ◽  
Current Code

The results of an investigation into the behaviour of thin-walled steel tubes filled with high strength concrete are presented. The main emphasis is placed on the level of ductility that can be achieved, considering the fact that neither high strength concrete nor thin steel tubes are individually able to absorb significant amounts of energy under cyclic loading. Results of 26 tests on specimens with a diameter of 152 mm and a wall thickness of 1.7 mm, filled with concrete of characteristic compressive strength ranging between 73 and 92 MPa, are reported. Load combinations on the specimens range from pure axial compression, through various combinations of axial load and bending, to pure bending. Three specimens were subjected to cyclic loading. Test results are compared with design models that are used in current code specifications. Key words: steel tubes, concrete, composite, beam-column, beam, column, experimental.

An experimental study of steel fiber-reinforced high-strength concrete slender columns under cyclic loading

2013 ◽  
Vol 57 ◽  
pp. 565-577 ◽  
Author(s):  
Karen E. Caballero-Morrison ◽  
J.L. Bonet ◽  
Juan Navarro-Gregori ◽  
Pedro Serna-Ros
Keyword(s):  
Experimental Study ◽  
Cyclic Loading ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Fiber Reinforced ◽  
Strength Concrete ◽  
Slender Columns
Sign in / Sign up

Export Citation Format

Share Document