Microstructures and mechanical properties of Ti–Mo alloys cold-rolled and heat treated

2011 ◽  
Vol 62 (10) ◽  
pp. 931-937 ◽  
Author(s):  
Ying-Long Zhou ◽  
Dong-Mei Luo
Keyword(s):  
Mechanical Properties ◽  
Heat Treated ◽  
Cold Rolled ◽  
Microstructures And Mechanical Properties

scholarly journals Effects of Post Heat Treatment on the Mechanical Properties of Cold-Rolled Ti/Cu Clad Sheet

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1672
Author(s):  
Chang-Suk Youn ◽  
Dong-Geun Lee
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Rolling Process ◽  
Post Treatment ◽  
Post Heat Treatment ◽  
Clad Sheet ◽  
Heat Treated ◽  
Bonding Properties ◽  
High Elongation ◽  
Cold Rolled

Titanium and titanium alloys have excellent corrosion and heat resistance, but weak electric and thermal conductivity. The weak conductivity of titanium can be overcome by cladding with copper, which has high conductivity. Although titanium is expensive, it is selected as a material suitable for applications requiring corrosion resistance such as in heat exchangers. This study was to investigate the effect of post heat treatment on the mechanical properties of the Ti/Cu cold-rolled clad plate by using the interfacial diffusion bonding. A titanium clad by cold rolling should be heat-treated after the rolling process to improve the bonding properties through the diffusion of metals and removal of residual stress due to work hardening, despite the easy formation of intermetallic compounds of Ti and Cu. As a result post-treatment, the elongation was improved by more than two times from 21% to max. 53% by the Ti-Cu interface diffusion phenomenon and the average tensile strength of the 450 °C heat-treated specimens was 353 MPa. By securing high elongation while maintaining excellent tensile and yield strength through post-treatment, the formability of Ti-Cu clad plate can be greatly improved.

Effect of Sc on As-Cast Microstructures and Mechanical Properties of Al-Si-Mg-Cu-Ti Alloys

2017 ◽  
Vol 732 ◽  
pp. 32-37 ◽  
Author(s):  
Ming He Wang ◽  
Xiao Dong Du ◽  
Yu Kun Li ◽  
Zhen Zhang ◽  
Hai Lin Su ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Testing Machine ◽  
Ti Alloys ◽  
Universal Testing ◽  
Transmission Electron ◽  
Heat Treated ◽  
Eutectic Si ◽  
Microstructures And Mechanical Properties ◽  
Equiaxed Grain

The as-cast microstructures and mechanical properties of Al-Si-Mg-Cu-Ti alloys with and without Sc were investigated by metallographic microscope, field emission scanning electron microscope, energy spectrum analysis, transmission electron microscope and universal testing machine. The result shows that adding 0.20wt.% Sc into the casting alloy can refine the grain, change the growth morphology from dendrite to fine equiaxed grain, and the morphology of eutectic Si by rough laminar structure into fine fibrous. The tensile strength of alloy with 0.20wt.% Sc is up to 304.4 MPa after T6 heat treated, which is close to that of 6061 forging aluminum alloy.

S1903-1-1 Microstructures and Mechanical Properties of heat treated Heat-resisting Alloys for the Mono-propellant Thruster

2010 ◽  
Vol 2010.5 (0) ◽  
pp. 383-384
Author(s):  
Daisuke KURODA ◽  
Takuya SUZUKI ◽  
Yoko YAMABE-MITARAI ◽  
Yoshinori ONO ◽  
Hideshi KAGAWA ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treated ◽  
Microstructures And Mechanical Properties
Sign in / Sign up

Export Citation Format

Share Document