Design and implementation of two-degree-of-freedom tuned mass damper in milling vibration mitigation

2015 ◽  
Vol 335 ◽  
pp. 78-88 ◽  
Author(s):  
Yiqing Yang ◽  
Wei Dai ◽  
Qiang Liu
Keyword(s):  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Vibration Mitigation ◽  
Design And Implementation ◽  
Mass Damper ◽  
Two Degree Of Freedom ◽  
Milling Vibration

The Two-Degree-of-Freedom Tuned-Mass Damper for Suppression of Single-Mode Vibration Under Random and Harmonic Excitation

2005 ◽  
Vol 128 (1) ◽  
pp. 56-65 ◽  
Author(s):  
Lei Zuo ◽  
Samir A. Nayfeh
Keyword(s):  
Vibration Suppression ◽  
Single Mode ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Degree Of Freedom ◽  
Primary System ◽  
H Infinity ◽  
Mass Damper ◽  
Mode Vibration ◽  
Two Degree Of Freedom

Whenever a tuned-mass damper is attached to a primary system, motion of the absorber body in more than one degree of freedom (DOF) relative to the primary system can be used to attenuate vibration of the primary system. In this paper, we propose that more than one mode of vibration of an absorber body relative to a primary system be tuned to suppress single-mode vibration of a primary system. We cast the problem of optimization of the multi-degree-of-freedom connection between the absorber body and primary structure as a decentralized control problem and develop optimization algorithms based on the H2 and H-infinity norms to minimize the response to random and harmonic excitations, respectively. We find that a two-DOF absorber can attain better performance than the optimal SDOF absorber, even for the case where the rotary inertia of the absorber tends to zero. With properly chosen connection locations, the two-DOF absorber achieves better vibration suppression than two separate absorbers of optimized mass distribution. A two-DOF absorber with a negative damper in one of its two connections to the primary system yields significantly better performance than absorbers with only positive dampers.

Analytical Investigation of Vibration Attenuation With a Nonlinear Tuned Mass Damper

2015 ◽  
Author(s):  
Andrew J. Dick ◽  
Aaron Atzil ◽  
Satish Nagarajaiah
Keyword(s):  
Primary Structure ◽  
Multiple Scales ◽  
Tuned Mass Damper ◽  
Analytical Investigation ◽  
Degree Of Freedom ◽  
Approximate Analytical Solutions ◽  
Vibration Attenuation ◽  
Mass Damper ◽  
Two Degree Of Freedom ◽  
Nonlinear Tuned Mass Damper

Vibration attenuation devices are used to reduce the vibrations of various mechanical systems and structures. In this work, an analytical method is proposed to provide the means to investigate the influence of system parameters on the dynamic response of a system. The method of multiple scales is used to calculate an approximate broadband solution for a two degree-of-freedom system consisting of a linear primary structure and a nonlinear tuned mass damper. The model is decoupled, approximate analytical solutions are calculated, and then they are combined to produce the desired frequency-response information. The approach is initially applied to a linear two degree-of-freedom system in order to verify its performance. The approach is then applied to the nonlinear system in order to study how varying the values of parameters associated with the nonlinear absorber affect its ability to attenuate the response of the primary structure.

Tuned mass damper and high static low dynamic stiffness isolator for vibration reduction of beam structure

2019 ◽  
Vol 234 (1) ◽  
pp. 95-115 ◽  
Author(s):  
Meysam Raei ◽  
Morteza Dardel
Keyword(s):  
Natural Frequency ◽  
Dynamic Stiffness ◽  
Excitation Amplitude ◽  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Negative Stiffness ◽  
Low Frequencies ◽  
First Case ◽  
Mass Damper ◽  
Two Degree Of Freedom

In this work, the combination effect of tuned mass damper and high static low dynamic stiffness (HSLDS) isolator is investigated in reducing the vibration amplitude of Euler–Bernoulli beam with a nonlinear attachment. The performance of the absorber is studied in two cases; the first case, HSLDS isolator is one degree of freedom and the second case, two degree of freedom isolator is combined of HSLDS isolator and tuned mass damper absorber. By comparing the performance of these two isolators, it is revealed the two degree of freedom isolator has much better performance in direct force excitation and also improves the system performance in the base excitation. This isolator reduces the system amplitude at all frequencies, especially ultra-low frequencies, which is the main advantage to this isolator with respect to other isolators and reduces the natural frequency until the phenomenon of resonance occurs at a lower frequency. Moreover, decreasing the natural frequency increases the damping and in quasi zero stiffness and negative stiffness structure, the system has supercritical damping. This isolator is studied for positive, quasi zero and negative stiffness. The results show that the system with quasi zero stiffness has the best performances. Also, by increasing the excitation amplitude, the isolator loses its effectiveness.

scholarly journals Damping of coupled bending-torsion beam vibrations by a two-dof tmd with analogous coupling

2021 ◽  
Author(s):  
Jan Høgsberg
Keyword(s):  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Response Analysis ◽  
Flexible Beam ◽  
Torsion Beam ◽  
Single Cross Section ◽  
Mass Damper ◽  
Axis Of Symmetry ◽  
Modal Truncation ◽  
Two Degree Of Freedom

Coupled bending-torsion vibrations of a beam with a single cross-section axis of symmetry are mitigated by a two-degree-of-freedom (dof) tuned mass damper with a coupling analogous to that of the beam. By modal truncation a four-degree-of-freedom model is derived for tmd tuning. Because of the analogous tmd properties, a stiffness tuning formula identical to that for the classic tuned mass damper secures inverse relations between all four undamped natural frequencies. Expressions for the tmd damping are subsequently found by a numerical search, which maximizes the smallest of the four damping ratios, resulting in equal damping in three of the four modes. The two-dof coupled tmd is finally assessed by numerical root locus and frequency response analysis for a full flexible beam.

scholarly journals Parameter optimization of tuned mass damper for three-degree-of-freedom vibration systems

2013 ◽  
Vol 35 (3) ◽  
Author(s):  
Nguyen Van Khang ◽  
Trieu Quoc Loc ◽  
Nguyen Anh Tuan
Keyword(s):  
Inequality Constraints ◽  
Tuned Mass Damper ◽  
Parameters Optimization ◽  
Degree Of Freedom ◽  
Aerospace Engineering ◽  
Lower And Upper Bounds ◽  
Mass Damper ◽  
Sequential Quadratic Programming Method ◽  
Quadratic Programming Method ◽  
Three Degree Of Freedom

There are problems in mechanical, structural and aerospace engineering that can be formulated as Nonlinear Programming. In this paper, the problem of parameters optimization of tuned mass damper for three-degree-of-freedom vibration systems is investigated using sequential quadratic programming method. The objective is to minimize the extreme vibration amplitude of vibration models. It is shown that the constrained formulation, that includes lower and upper bounds on the updating parameters in the form of inequality constraints, is important for obtaining a correct updated model.

Effects of human-induced load models on tuned mass damper in reducing floor vibration

2019 ◽  
Vol 22 (11) ◽  
pp. 2449-2463
Author(s):  
Jun Chen ◽  
Ziping Han ◽  
Ruotian Xu
Keyword(s):  
Response Spectra ◽  
Tuned Mass Damper ◽  
Design Guidelines ◽  
Degree Of Freedom ◽  
Dynamic Responses ◽  
Single Degree Of Freedom ◽  
Load Model ◽  
Load Models ◽  
Single Degree ◽  
Mass Damper

Dozens of human-induced load models for individual walking and jumping have been proposed in the past decades by researchers and are recommended in various design guidelines. These models differ from each other in terms of function orders, coefficients, and phase angles. When designing structures subjected to human-induced loads, in many cases, a load model is subjectively selected by the design engineer. The effects of different models on prediction of structural responses and efficiency of vibration control devices such as a tuned mass damper, however, are not clear. This article investigates the influence of human-induced load models on performance of tuned mass damper in reducing floor vibrations. Extensive numerical simulations were conducted on a single-degree-of-freedom system with one tuned mass damper, whose dynamic responses to six walking and four jumping load models were calculated and compared. The results show a maximum three times difference in the acceleration responses among all load models. Acceleration response spectra of the single-degree-of-freedom system with and without a tuned mass damper were also computed and the response reduction coefficients were determined accordingly. Comparison shows that the reduction coefficient curves have nearly the same tendency for different load models and a tuned mass damper with 5% mass ratio is able to achieve 50%–75% response reduction when the structure’s natural frequency is in multiples of the walking or jumping frequency. All the results indicate that a proper load model is crucial for structural response calculation and consequently the design of tuned mass damper device.

Three-Element Vibration Absorber–Inerter for Passive Control of Single-Degree-of-Freedom Structures

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Abdollah Javidialesaadi ◽  
Nicholas E. Wierschem
Keyword(s):  
Passive Control ◽  
Translational Motion ◽  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Superior Performance ◽  
Underlying Structure ◽  
Vibration Absorber ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Mass Damper

In this study, a novel passive vibration control device, the three-element vibration absorber–inerter (TEVAI) is proposed. Inerter-based vibration absorbers, which utilize a mass that rotates due to relative translational motion, have recently been developed to take advantage of the potential high inertial mass (inertance) of a relatively small mass in rotation. In this work, a novel configuration of an inerter-based absorber is proposed, and its effectiveness at suppressing the vibration of a single-degree-of-freedom system is investigated. The proposed device is a development of two current passive devices: the tuned-mass-damper–inerter (TMDI), which is an inerter-base tuned mass damper (TMD), and the three-element dynamic vibration absorber (TEVA). Closed-form optimization solutions for this device connected to a single-degree-of-freedom primary structure and loaded with random base excitation are developed and presented. Furthermore, the effectiveness of this novel device, in comparison to the traditional TMD, TEVA, and TMDI, is also investigated. The results of this study demonstrate that the TEVAI possesses superior performance in the reduction of the maximum and root-mean-square (RMS) response of the underlying structure in comparison to the TMD, TEVA, and TMDI.

Sign in / Sign up

Export Citation Format

Share Document