scholarly journals The port Hamiltonian approach to modeling and control of Continuous Stirred Tank Reactors

2011 ◽  
Vol 21 (10) ◽  
pp. 1449-1458 ◽  
Author(s):  
H. Hoang ◽  
F. Couenne ◽  
C. Jallut ◽  
Y. Le Gorrec
Keyword(s):  
Stirred Tank ◽  
Hamiltonian Approach ◽  
Modeling And Control ◽  
Stirred Tank Reactors ◽  
Continuous Stirred Tank ◽  
Continuous Stirred Tank Reactors ◽  
And Control

scholarly journals Study on the Nonlinear Dynamics of the Continuous Stirred Tank Reactors

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1436
Author(s):  
Liangcheng Suo ◽  
Jiamin Ren ◽  
Zemeng Zhao ◽  
Chi Zhai
Keyword(s):  
Nonlinear Dynamics ◽  
Control Strategies ◽  
Stirred Tank ◽  
Sustained Oscillation ◽  
Operational Parameters ◽  
Stirred Tank Reactors ◽  
Oscillatory Dynamics ◽  
Continuous Stirred Tank ◽  
Continuous Stirred Tank Reactors ◽  
And Control

Chemical processes often exhibit nonlinear dynamics and tend to generate complex state trajectories, which present challenging operational problems due to complexities such as output multiplicity, oscillation, and even chaos. For this reason, a complete knowledge of the static and dynamic nature of these behaviors is required to understand, to operate, to control, and to optimize continuous stirred tank reactors (CSTRs). Through nonlinear analysis, the possibility of output multiplicity, self-sustained oscillation, and torus dynamics are studied in this paper. Specifically, output multiplicity is investigated in a case-by-case basis, and related operation and control strategies are discussed. Bifurcation analysis to identify different dynamic behaviors of a CSTR is also implemented, where operational parameters are identified to obtain self-oscillatory dynamics and possible unsteady-state operation strategy through designing the CSTR as self-sustained periodic. Finally, a discussion on codimension-1 bifurcations of limits cycles is also provided for the exploration of periodic forcing on self-oscillators. Through this synergistic study on the CSTRs, possible output multiplicity, oscillatory, and chaotic dynamics facilitates the implementation of novel operation/control strategies for the process industry.

Removal of lead by sulfate-reducing bacteria in anaerobic continuous stirred tank reactors

2016 ◽  
Vol 14 (3) ◽  
pp. 557-561
Author(s):  
Nguyễn Thị Yên ◽  
Kiều Thị Quỳnh Hoa
Keyword(s):  
Sulfate Reducing Bacteria ◽  
Stirred Tank ◽  
Synthetic Wastewater ◽  
Terminal Electron Acceptor ◽  
Stirred Tank Reactors ◽  
Sulfate Reducing ◽  
Sulfide Production ◽  
Continuous Stirred Tank ◽  
Continuous Stirred Tank Reactors ◽  
Reducing Bacteria

Lead contaminated wastewater negatively impacts to living organisms as well as humans. In recent years, a highly promising biological process using the anaerobic production of sulfide ions by sulfate-reducing bacteria has presented itself as an alternative option for the removal of lead. This process is based on microbial utilization of electron donors, such as organic compounds (carbon sources), and sulfate as the terminal electron acceptor for sulfide production. The biogenic hydrogen sulfide reacts with dissolved heavy metals to form insoluble metal sulfide precipitates Removal of lead by an enriched consortium of sulfate-reducing bacteria (DM10) was evaluated sulfate reduction, sulfide production and lead precipitation. Four parallel anaerobic continuous stirred tank reactors (CSTR, V = 2L) (referred as R1 - R4) were fed with synthetic wastewater containing Pb2+ in the concentrations of 0, 100, 150 and 200 mg L-1 of lead and operated with a hydraulic retention time of 5 days for 40 days. The loading rates of each metal in R1- R4 were 0, 20, 30 and 40 mg L-1 d-1, respectively. The results showed that there was no inhibition of SRB growth and that lead removal efficiencies of 99-100% for Pb2+ were achieved in R2 (100 mg L-1) and R3 (150 mg L-1) throughout the experiment. For the highest lead concentration of  200 mg L-1, a decrease in efficiency of removal (from 100 to 96%) was observed at the end of the experiment. The obtained result of this study might help for a better control operation and performance improvements of reactors.

scholarly journals Process Engineering of the Acetone-Ethanol-Butanol (ABE) Fermentation in a Linear and Feedback Loop Cascade of Continuous Stirred Tank Reactors: Experiments, Modeling and Optimization

Fuels ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 108-129
Author(s):  
Katja Karstens ◽  
Sergej Trippel ◽  
Peter Götz
Keyword(s):  
Feedback Loop ◽  
Early Stage ◽  
Formation Rate ◽  
Abe Fermentation ◽  
Operating Conditions ◽  
Stirred Tank ◽  
Second Phase ◽  
Stirred Tank Reactors ◽  
Continuous Stirred Tank ◽  
Continuous Stirred Tank Reactors

The production of butanol, acetone and ethanol by Clostridium acetobutylicum is a biphasic fermentation process. In the first phase the carbohydrate substrate is metabolized to acetic and butyric acid, in the following second phase the product spectrum is shifted towards the economically interesting solvents. Here we present a cascade of six continuous stirred tank reactors (CCSTR), which allows performing the time dependent metabolic phases of an acetone-butanol-ethanol (ABE) batch fermentation in a spatial domain. Experimental data of steady states under four operating conditions—with variations of the pH in the first bioreactor between 4.3 and 5.6 as well as the total dilution rate between 0.042 h−1 and 0.092 h−1—were used to optimize and validate a corresponding mathematical model. Beyond a residence time distribution representation and substrate, biomass and product kinetics this model also includes the differentiation of cells between the metabolic states. Model simulations predict a final product concentration of 8.2 g butanol L−1 and a productivity of 0.75 g butanol L−1 h−1 in the CCSTR operated at pHbr1 of 4.3 and D = 0.092 h−1, while 31% of the cells are differentiated to the solventogenic state. Aiming at an enrichment of solvent-producing cells, a feedback loop was introduced into the cascade, sending cells from a later state of the process (bioreactor 4) back to an early stage of the process (bioreactor 2). In agreement with the experimental observations, the model accurately predicted an increase in butanol formation rate in bioreactor stages 2 and 3, resulting in an overall butanol productivity of 0.76 g L−1 h−1 for the feedback loop cascade. The here presented CCSTR and the validated model will serve to investigate further ABE fermentation strategies for a controlled metabolic switch.

scholarly journals Effect of Hydraulic Retention Time on Anaerobic Digestion of Wheat Straw in the Semicontinuous Continuous Stirred-Tank Reactors

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Xiao-Shuang Shi ◽  
Jian-Jun Dong ◽  
Jun-Hong Yu ◽  
Hua Yin ◽  
Shu-Min Hu ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
Wheat Straw ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Methane Content ◽  
Stirred Tank ◽  
Crystalline Cellulose ◽  
Stirred Tank Reactors ◽  
Continuous Stirred Tank ◽  
Continuous Stirred Tank Reactors

Three semicontinuous continuous stirred-tank reactors (CSTR) operating at mesophilic conditions (35°C) were used to investigate the effect of hydraulic retention time (HRT) on anaerobic digestion of wheat straw. The results showed that the average biogas production with HRT of 20, 40, and 60 days was 46.8, 79.9, and 89.1 mL/g total solid as well as 55.2, 94.3, and 105.2 mL/g volatile solids, respectively. The methane content with HRT of 20 days, from 14.2% to 28.5%, was the lowest among the three reactors. The pH values with HRT of 40 and 60 days were in the acceptable range compared to that with HRT of 20 days. The propionate was dominant in the reactor with HRT of 20 days, inhibiting the activities of methanogens and causing the lower methane content in biogas. The degradation of cellulose, hemicellulose, and crystalline cellulose based on XRD was also strongly influenced by HRTs.

Sign in / Sign up

Export Citation Format

Share Document