A simplified model of maximum cross-section flattening in continuous rotary straightening process of thin-walled circular steel tubes

2016 ◽  
Vol 238 ◽  
pp. 305-314 ◽  
Author(s):  
Z.Q. Zhang ◽  
Y.H. Yan ◽  
H.L. Yang
Keyword(s):  
Cross Section ◽  
Simplified Model ◽  
Steel Tubes ◽  
Maximum Cross Section ◽  
Thin Walled

First and Second Order Elastoplastic Analyses of Thin-Walled Metal Members using Generalized Beam Theory

2018 ◽  
Author(s):  
Miguel Abambres
Keyword(s):  
Finite Element ◽  
Stainless Steel ◽  
Cross Section ◽  
Beam Theory ◽  
Second Order ◽  
Flow Rule ◽  
Non Linear ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalized Beam Theory

Original Generalized Beam Theory (GBT) formulations for elastoplastic first and second order (postbuckling) analyses of thin-walled members are proposed, based on the J2 theory with associated flow rule, and valid for (i) arbitrary residual stress and geometric imperfection distributions, (ii) non-linear isotropic materials (e.g., carbon/stainless steel), and (iii) arbitrary deformation patterns (e.g., global, local, distortional, shear). The cross-section analysis is based on the formulation by Silva (2013), but adopts five types of nodal degrees of freedom (d.o.f.) – one of them (warping rotation) is an innovation of present work and allows the use of cubic polynomials (instead of linear functions) to approximate the warping profiles in each sub-plate. The formulations are validated by presenting various illustrative examples involving beams and columns characterized by several cross-section types (open, closed, (un) branched), materials (bi-linear or non-linear – e.g., stainless steel) and boundary conditions. The GBT results (equilibrium paths, stress/displacement distributions and collapse mechanisms) are validated by comparison with those obtained from shell finite element analyses. It is observed that the results are globally very similar with only 9% and 21% (1st and 2nd order) of the d.o.f. numbers required by the shell finite element models. Moreover, the GBT unique modal nature is highlighted by means of modal participation diagrams and amplitude functions, as well as analyses based on different deformation mode sets, providing an in-depth insight on the member behavioural mechanics in both elastic and inelastic regimes.

Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section

2003 ◽  
Vol 41 (10) ◽  
pp. 891-900 ◽  
Author(s):  
A.G Mamalis ◽  
D.E Manolakos ◽  
M.B Ioannidis ◽  
P.K Kostazos ◽  
C Dimitriou
Keyword(s):  
Finite Element ◽  
Finite Element Simulation ◽  
Cross Section ◽  
Element Simulation ◽  
Thin Walled

scholarly journals Validation of Welding Simulations Using Thermal Strains Measured with DIC

2011 ◽  
Vol 70 ◽  
pp. 129-134 ◽  
Author(s):  
Maarten De Strycker ◽  
Pascal Lava ◽  
Wim Van Paepegem ◽  
Luc Schueremans ◽  
Dimitri Debruyne
Keyword(s):  
Residual Stresses ◽  
Cross Section ◽  
Circular Cross Section ◽  
Welding Process ◽  
Weld Bead ◽  
Image Correlation ◽  
Steel Tubes ◽  
Element Analysis ◽  
Strain Evolution ◽  
The Cross

Residual stresses can affect the performance of steel tubes in many ways and as a result their magnitude and distribution is of particular interest to many applications. Residual stresses in cold-rolled steel tubes mainly originate from the rolling of a flat plate into a circular cross section (involving plastic deformations) and the weld bead that closes the cross section (involving non-uniform heating and cooling). Focus in this contribution is on the longitudinal weld bead that closes the cross section. To reveal the residual stresses in the tubes under consideration, a finite element analysis (FEA) of the welding step in the production process is made. The FEA of the welding process is validated with the temperature evolution of the thermal simulation and the strain evolution for the mechanical part of the analysis. Several methods for measuring the strain evolution are available and in this contribution it is investigated if the Digital Image Correlation (DIC) technique can record the strain evolution during welding. It is shown that the strain evolution obtained with DIC is in agreement with that found by electrical resistance strain gauges. The results of these experimental measuring methods are compared with numerical results from a FEA of the welding process.

Flexural–torsional behavior of thin-walled composite beams with closed cross-section

2007 ◽  
Vol 45 (7-8) ◽  
pp. 699-705 ◽  
Author(s):  
F. Shadmehri ◽  
H. Haddadpour ◽  
M.A. Kouchakzadeh
Keyword(s):  
Cross Section ◽  
Composite Beams ◽  
Torsional Behavior ◽  
Thin Walled

Numerical Investigation of Cross-Section on Aluminum A6063 Thin-Walled Structures under Low-Velocity Impact Loading

2014 ◽  
Vol 1019 ◽  
pp. 96-102
Author(s):  
Ali Taherkhani ◽  
Ali Alavi Nia
Keyword(s):  
Energy Absorption ◽  
Cross Section ◽  
Cross Sections ◽  
Peak Load ◽  
Circular Cross Section ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Crush Strength

In this study, the energy absorption capacity and crush strength of cylindrical thin-walled structures is investigated using nonlinear Finite Elements code LS-DYNA. For the thin-walled structure, Aluminum A6063 is used and its behaviour is modeled using power-law equation. In order to better investigate the performance of tubes, the simulation was also carried out on structures with other types of cross-sections such as triangle, square, rectangle, and hexagonal, and their results, namely, energy absorption, crush strength, peak load, and the displacement at the end of tubes was compared to each other. It was seen that the circular cross-section has the highest energy absorption capacity and crush strength, while they are the lowest for the triangular cross-section. It was concluded that increasing the number of sides increases the energy absorption capacity and the crush strength. On the other hand, by comparing the results between the square and rectangular cross-sections, it can be found out that eliminating the symmetry of the cross-section decreases the energy absorption capacity and the crush strength. The crush behaviour of the structure was also studied by changing the mass and the velocity of the striker, simultaneously while its total kinetic energy is kept constant. It was seen that the energy absorption of the structure is more sensitive to the striker velocity than its mass.

Sign in / Sign up

Export Citation Format

Share Document