Improved surface roughness as a result of free-form surface machining using self-organized neural network

2008 ◽  
Vol 204 (1-3) ◽  
pp. 94-102 ◽  
Author(s):  
Marjan Korosec ◽  
Janez Kopac
Keyword(s):  
Neural Network ◽  
Surface Roughness ◽  
Free Form ◽  
Surface Machining ◽  
Self Organized ◽  
Free Form Surface

Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surface Using Barrel Tool: Control of Contact Point on Cutting Edge

2020 ◽  
Author(s):  
Tomonobu Suzuki ◽  
Koichi Morishige
Keyword(s):  
Tool Path ◽  
Contact Point ◽  
Cutting Edge ◽  
Free Form ◽  
End Mill ◽  
Ball End Mill ◽  
Surface Machining ◽  
Free Form Surface ◽  
The Cost ◽  
Five Axis

Abstract This study aimed to improve the efficiency of free-form surface machining by using a five-axis controlled machine tool and a barrel tool. The barrel tool has cutting edges, with curvature smaller than the radius, increasing the pick feed width compared with a conventional ball end mill of the same tool radius. As a result, the machining efficiency can be improved; however, the cost of the barrel tool is high and difficult to reground. In this study, a method to obtain the cutting points that make the cusp height below the target value is proposed. Moreover, a method to improve the tool life by continuously and uniformly changing the contact point on the cutting edge is proposed. The usefulness of the developed method is confirmed through machining simulations.

Machining of Carbon Fibre-Reinforced Silicon-Ccarbide Composites

2008 ◽  
Vol 59 ◽  
pp. 51-54 ◽  
Author(s):  
Dirk Biermann ◽  
T. Jansen ◽  
M. Feldhoff
Keyword(s):  
Silicon Carbide ◽  
Carbon Fibre ◽  
Drill Hole ◽  
Free Form ◽  
Surface Machining ◽  
Free Form Surface ◽  
Hole Machining

A growing demand for fibre-reinforced ceramics necessitates effective ways for machining these materials. In this paper, different tool concepts are presented for an efficient machining of carbon fibre-reinforced silicon carbide. Drill hole machining, slot machining and first investigations of free-form surface machining are presented.

scholarly journals A High-Efficiency Impeller Channel Quasi-Triangular Tool Path Planning Method Based on Template Trajectory Mapping

2018 ◽  
Vol 36 (6) ◽  
pp. 1216-1223
Author(s):  
Feiyan Han ◽  
Juan Wei ◽  
Bin Feng ◽  
Wu Zhang
Keyword(s):  
Path Planning ◽  
Tool Path ◽  
Planning Method ◽  
Free Form ◽  
Physical Domain ◽  
Tool Path Planning ◽  
Surface Machining ◽  
Mapping Model ◽  
Trajectory Mapping ◽  
Free Form Surface

The manufacturing technology of an integral impeller is an important indicator for measuring the manufacturing capability of a country. Its manufacturing process involves complex free-form surface machining, a time consuming and error-prone process, and the tool path planning is considered as a critical issue of free-form surface machining but still lacks a systematic solution. In this paper, aiming at the tool path planning of the impeller channel, a quasi-triangular tool path planning method based on parametric domain template trajectory mapping is proposed. The main idea is to map the template trajectory to physical domain by using the mapping model of parametric domain to the physical domain to obtain the actual machining path. Firstly, the trajectory mapping model of parametric domain to physical domain is established using the morphing technique, and the template trajectory mapping method in the parametric domain is given. Secondly, the clean-up boundary of the impeller channel is determined in the parametric domain, and the quasi-triangular template trajectory of the impeller channel is defined. Finally, taking a certain type of impeller as an example, the quasi-triangular tool path of the impeller channel is calculated, and the tool path calculation time of this method is compared with that of the traditional isometric offset method. The result shows that the computational efficiency is improved by 45% with this method, which provides a new method for the rapid acquisition of NC machining tool path for impeller channels. In addition, the simulation and actual machining are carried out, the results show that the shape of actual cutting traces on the surface of the impeller channel is quasi-triangular, showing that this method is effective and feasible.

Effect of the Working Diameter to the Surface Quality in Free-Form Surface Milling

2013 ◽  
Vol 581 ◽  
pp. 372-377 ◽  
Author(s):  
Balázs Mikó ◽  
Jozef Beňo
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Cutting Speed ◽  
Chip Thickness ◽  
Free Form ◽  
Effective Diameter ◽  
Test Part ◽  
Free Form Surface ◽  
Free Form Surfaces

The article presents the changing of the working diameter (effective diameter) and its effect to the surface roughness based on milling experiments of a test part in 3D milling of free-form surfaces. The position of the surface and the step depth determine the effective diameter, in case of constant revolution of the tool, the actual cutting speed and the minimal removable chip thickness will change. The article presents the result of the application of the constant cutting speed and feed per tooth.

An Intelligent Optimization Approach of Feedrate Scheduling Based on Hybrid Simulation Models

2008 ◽  
Vol 392-394 ◽  
pp. 211-215
Author(s):  
Li Qiang Zhang ◽  
Yu Han Wang ◽  
Ming Chen
Keyword(s):  
Tool Path ◽  
Mechanistic Model ◽  
Geometric Model ◽  
Physical Models ◽  
Free Form ◽  
Optimization Approach ◽  
Machining Processes ◽  
Surface Machining ◽  
Feedrate Scheduling ◽  
Free Form Surface

In free-form surface machining, it is essential to optimize the feedrate in order to improve the machining efficiency. Conservative constant feedrate values have been mostly used since there was a lack of physical models and optimization tools for the machining processes. The overall goal of this research is the integration of geometric and mechanistic milling models for force prediction and feedrate scheduling for free-form surface machining. For each tool move a geometric model calculates the cutting geometry parameters, then a mechanistic model uses this information with the constraint force to calculate desired feedrates. The feedrate is written into the part program. When the integrated modeling approach was used, it was shown that the machining time can be decreased significantly along the tool path. Production time in machining propeller example was reduced to 35% compared to constant feedrate cases.

scholarly journals Improving the accuracy of free-form surface machining on CNC milling machines

Mechanik ◽  
2018 ◽  
Vol 91 (12) ◽  
pp. 1100-1103
Author(s):  
Andrzej Werner
Keyword(s):  
Geometric Model ◽  
Free Form ◽  
Cnc Milling ◽  
Surface Machining ◽  
Machining Errors ◽  
Milling Machines ◽  
Coordinate Measurements ◽  
Free Form Surface ◽  
Free Form Surfaces

This article presents a method of increasing the accuracy of the production of free-form surfaces. This method is based on the execution of coordinate measurements of the pre-treated object and reconstruction of its nominal geometric model in order to compensate existing machining errors.

Sign in / Sign up

Export Citation Format

Share Document