The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel

2020 ◽  
Vol 56 ◽  
pp. 463-473 ◽  
Author(s):  
Hüseyin Alp Çetindağ ◽  
Adem Çiçek ◽  
Necati Uçak
Keyword(s):  
Tool Wear ◽  
Surface Integrity ◽  
Hard Turning ◽  
Bearing Steel ◽  
Aisi 52100

scholarly journals Surface Integrity of AISI 52100 Steel during Hard Turning in Different Near-Dry Environments

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Ajay Chavan ◽  
Vikas Sargade
Keyword(s):  
Surface Roughness ◽  
Surface Integrity ◽  
Hard Turning ◽  
Vortex Tube ◽  
White Layer ◽  
Bearing Steel ◽  
Hybrid Nanofluid ◽  
Aisi 52100 ◽  
Aisi 52100 Steel ◽  
Cooling And Lubrication

AISI 52100 hardened bearing steel is popular in many industrial applications due to its excellent wear resistance and high strength. Therefore, a high level of surface integrity of the same is the utmost important requirement to enhance fatigue life. Machining of hardened AISI 52100 steel is difficult because severe plastic deformation and generation of high temperature alter the surface metallurgy of the machined component and hamper the tool life. The present investigation includes a comparative analysis of surface integrity of AISI 52100 bearing steel during hard turning under different near-dry environments, namely, dry, Minimum Quantity Cooling and Lubrication (MQCL), Compressed Chilled Air by Vortex Tube (CCAVT), and Hybrid Nanofluid Minimum Quantity Cooling and Lubrication (Hybrid NF-MQCL). Soyabean (a vegetable) oil is used as cutting fluid in MQCL and base fluid in Hybrid NF-MQCL environments. To prepare hybrid nanofluid, two different nanoparticles Al2O3 and MWCNT, are used. The chilled air is generated through a vortex tube. The surface integrity of AISI 52100 steel was studied in terms of microhardness, the thickness of the white layer, surface roughness (Ra), and residual stresses. Higher cutting speed and feed show positive and negative correlation on surface integrity of AISI 52100 steel, respectively. Hybrid nanofluid MQCL exhibits the lowest surface roughness (0.34 μm), microhardness (625 Hv0.1), compressive residual stresses (−168 MPa), and thin white layer (0.9 μm) in contrast, and dry machining shows higher surface roughness, microhardness, tensile residual stress, and thick white layer. In comparison, MQCL and CCAVT are found to be intermediate. It is found that hybrid nanofluid MQCL enhances the overall performance of the machined surface as compared to other near-dry techniques.

Tool wear effects on white and dark layer formation in hard turning of AISI 52100 steel

Wear ◽  
2012 ◽  
Vol 286-287 ◽  
pp. 98-107 ◽  
Author(s):  
A. Attanasio ◽  
D. Umbrello ◽  
C. Cappellini ◽  
G. Rotella ◽  
R. M'Saoubi
Keyword(s):  
Tool Wear ◽  
Hard Turning ◽  
Layer Formation ◽  
Dark Layer ◽  
Aisi 52100 ◽  
Aisi 52100 Steel

RSM Based Investigations on the Effects of Cutting Parameters on Surface Integrity during Cryogenic Hard Turning of AISI 52100

2015 ◽  
Vol 15 (3) ◽  
pp. 309-318 ◽  
Author(s):  
Suha K. Shihab ◽  
Zahid A. Khan ◽  
Arshad Noor Siddiquee
Keyword(s):  
Surface Integrity ◽  
Feed Rate ◽  
Hard Turning ◽  
Desirability Function ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Machined Surface ◽  
Aisi 52100 ◽  
Model Equations

AbstractEffect of cryogenic hard turning parameters (cutting speed, feed rate, and depth of cut) on surface roughness (Ra) and micro-hardness (µH) that constitute surface integrity (SI) of the machined surface of alloy steel AISI 52100 is investigated. Multilayer hard surface coated (TiN/TiCN/Al2O3/TiN) insert on CNC lathe is used for turning under different cutting parameters settings. RSM based Central composite design (CCD) of experiment is used to collect data for Ra and µH. Validity of assumptions related to the collected data is checked through several diagnostic tests. The analysis of variance (ANOVA) is used to determine main and interaction effects. Relationship between the variables is established using quadratic regression model. Both Ra and µH are influenced principally by the cutting speed and the feed rate. Model equations are found to predict accurate values of Ra and µH. Finally, desirability function approach for multiple response optimization is used to produce optimum SI.

scholarly journals Hard turning of AISI 52100 using PCBN wiper geometry inserts and the resulting surface integrity

2011 ◽  
Vol 19 ◽  
pp. 118-124 ◽  
Author(s):  
J. Guddat ◽  
R. M'Saoubi ◽  
P. Alm ◽  
D. Meyer
Keyword(s):  
Surface Integrity ◽  
Hard Turning ◽  
Aisi 52100
Sign in / Sign up

Export Citation Format

Share Document