The influence of process parameters on mechanical properties and corrosion behavior of friction stir welded aluminum joints

2018 ◽  
Vol 35 ◽  
pp. 1-15 ◽  
Author(s):  
Sara Bocchi ◽  
Marina Cabrini ◽  
Gianluca D’Urso ◽  
Claudio Giardini ◽  
Sergio Lorenzi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Behavior ◽  
Process Parameters ◽  
Influence Of Process Parameters ◽  
Friction Stir ◽  
Mechanical Properties And Corrosion

Effect of friction stir welding parameters on the material flow, mechanical properties and corrosion behavior of dissimilar AA5083-AA6061 joints

2021 ◽  
pp. 095440622110361
Author(s):  
Kethavath Kranthi Kumar ◽  
Adepu Kumar ◽  
MVNV Satyanarayana
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Corrosion Behavior ◽  
Process Parameters ◽  
Material Flow ◽  
Stir Zone ◽  
Friction Stir ◽  
Notch Tensile Strength ◽  
Mechanical Properties And Corrosion

Material flow has a significant impact on the joint properties and is one of the most challenging aspects to be understood in dissimilar friction stir welding. The present study emphasizes the role of process parameters on material flow, mechanical properties and corrosion behavior of dissimilar friction stir welds of AA5083-AA6061. Microstructural analysis revealed that the onion ring sub-layer width observed at the stir zone was substantially changed by varying process parameters. It was understood that the higher rotational speeds promote better intermixing and enhanced mechanical properties. The notch tensile strength values were in correlation with the intermixing of materials at the stir zone and the highest notch tensile strength value was obtained at 1400 rpm and 60 mm/min. A remarkable degree of material intermixing and fragmentation of intermetallics at higher rotational speeds resulted in better corrosion resistance.

Fabrication and characterization of friction stir processed Al 6061 reinforced with TiB2-Al2O3

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ch. Mohana Rao ◽  
K. Mallikarjuna Rao
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Process Parameters ◽  
Friction Stir Processing ◽  
Practical Implication ◽  
Research Work ◽  
Influence Of Process Parameters ◽  
Volume Percentage ◽  
Content Type ◽  
Friction Stir

PurposeThe objective of the paper is to evaluate the fabrication process and to study the influence of process parameters of friction stir processing of 6061-TiB2-Al2O3 Aluminum alloy surface composite on microhardness tensile strength, and microstructure.Design/methodology/approachFriction stir processing method is used for attaining the desired mechanical properties, and selectively processed reinforcements to fabricate the samples. The Taguchi technique was used to optimize rotational speed, travel speed and volume percentage of reinforcement particles to enhance the mechanical properties of 6061-TiB2-Al2O3 Aluminum alloy composite.FindingsThe fabrication of surface composites through FSP allows new inventions in terms of material with enhanced surface layers without changing the base metal.Practical implicationsTo examine the behavior of the surface of the composites in the different zones, the practical implication consists of the use of different characterization techniques like optical microscopy and scanning microscopy for microstructural behavior and the measurement of hardness and tensile tests for mechanical behavior.Originality/valueThe research work consists of tool design and process parameters, which can affect the final product (microstructural changes), and the performance of the modified surface layer behavior was studied and presented.

A Numerical and Experimental Analysis of Microstructural Aspects in AA2024-T3 Friction Stir Welding

2013 ◽  
Vol 554-557 ◽  
pp. 1022-1030 ◽  
Author(s):  
Pierpaolo Carlone ◽  
Gaetano S. Palazzo
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Heat Generation ◽  
Process Parameters ◽  
Fluid Dynamic ◽  
Weld Line ◽  
Work Piece ◽  
Viscoplastic Material ◽  
Influence Of Process Parameters ◽  
Friction Stir

In recent years, remarkable interest has been focused on the Friction Stir Welding (FSW) process, by academic as well as industrial research groups. Conceptually, the FSW process is quite simple: a non-consumable rotating tool is plunged between the adjoining edges of the parts to be welded and moved along the desired weld line. Frictional and viscous heat generation increases the work piece temperature, softening the processing material and forcing it to flow around the pin. Although FSW has been effectively applied in welding of several materials, such as copper, steel, magnesium, and titanium, considerable attention is still focused on aluminum welding, in particular for transport applications. Recent literature clearly evidenced microstructural variations in the stir zone, imputable to continuous dynamic recrystallization phenomena, leading to the formation of a finer equiaxed grains. Moreover, depending on the specific alloy, thermal cycles can induce coarsening or dissolution of precipitates in the thermo-mechanically affected zone (TMAZ) and in the heat affected zone (HAZ). The influence of the aforementioned microstructural aspects on mechanical properties and formability of FSWed assemblies is also well recognized. The aim of this paper is to numerically and experimentally investigate the influence of process parameters, namely rotating speed and welding speed, on microstructural aspects in AA2024-T3 friction stir butt welds. A three-dimensional Computational Fluid Dynamic (CFD) model has been implemented to simulate the process. A viscoplastic material model, based on Wright and Sheppard modification of the constitutive model initially proposed by Sellars and Tegart has been implemented in the commercial package ANSYS CFX, considering an Eulerian framework. Tool-workpiece interaction has been modeled assuming partial sticking/sliding condition, and incorporating both frictional and viscous contributions to the heat generation. Microstructural aspects have been numerically predicted using the Zenner-Holloman parameter and experimentally measured by means of conventional metallographic techniques. Satisfactory agreement has been found between simulated and experimental results. The influence of process parameters on mechanical properties has also been highlighted.

Sign in / Sign up

Export Citation Format

Share Document