Machine based energy-saving tool path generation for five-axis end milling of freeform surfaces

2016 ◽  
Vol 139 ◽  
pp. 1207-1223 ◽  
Author(s):  
Ke Xu ◽  
Ming Luo ◽  
Kai Tang
Keyword(s):  
Energy Saving ◽  
Tool Path ◽  
End Milling ◽  
Tool Path Generation ◽  
Path Generation ◽  
Freeform Surfaces ◽  
Five Axis

Tool Orientation Planning in Milling With Process Dynamic Constraints: A Minimax Optimization Approach

2018 ◽  
Vol 140 (11) ◽  
Author(s):  
Tao Huang ◽  
Xiao-Ming Zhang ◽  
Jürgen Leopold ◽  
Han Ding
Keyword(s):  
Tool Path ◽  
End Milling ◽  
Tool Path Generation ◽  
Optimization Approach ◽  
Path Generation ◽  
Tool Orientation ◽  
Minimax Optimization ◽  
Ball End Milling ◽  
Dynamic Constraints ◽  
Five Axis

In five-axis milling process, the tool path generated by a commercial software seldom takes the dynamics of the machining process into account. The neglect of process dynamics may lead to milling chatter, which causes overcut, quick tool wear, etc., and thus damages workpiece surface and shortens tool life. This motivates us to consider dynamic constraints in the tool path generation. Tool orientation variations in five-axis ball-end milling influence chatter stability and surface location error (SLE) due to the varying tool-workpiece immersion area and cutting force, which inversely provides us a feasible and flexible way to suppress chatter and SLE. However, tool orientations adjustment for suppression of chatter and SLE may cause drastic changes of the tool orientations and affects surface quality. The challenge is to strike a balance between the smooth tool orientations and suppression of chatter and SLE. To overcome the challenge, this paper presents a minimax optimization approach for planning tool orientations. The optimization objective is to obtain smooth tool orientations, by minimizing the maximum variation of the rotational angles between adjacent cutter locations, with constraints of chatter-free and SLE threshold. A dedicated designed ball-end milling experiment is conducted to validate the proposed approach. The work provides new insight into the tool path generation for ball-end milling of sculpture surface; also it would be helpful to decision-making for process parameters optimization in practical complex parts milling operations at shop floor.

Study of The Tool Path Generation Method of an Ultra-Precision Spherical Complex Surface Based on a Five-Axis Machine Tool

2021 ◽  
Author(s):  
Tianji Xing ◽  
Xuesen Zhao ◽  
Zhipeng Cui ◽  
Rongkai Tan ◽  
Tao Sun
Keyword(s):  
Surface Roughness ◽  
Tool Path ◽  
Spherical Surface ◽  
Tool Path Generation ◽  
Path Generation ◽  
Tool Paths ◽  
Spherical Surfaces ◽  
Spherical Complex ◽  
Ultra Precision ◽  
Five Axis

Abstract The improvement of ultra-precision machining technology has significantly boosted the demand for the surface quality and surface accuracy of the workpieces to be machined. However, the geometric shapes of workpiece surfaces cannot be adequately manufactured with simple plane, cylindrical, or spherical surfaces because of their different applications in various fields. In this research, a method was proposed to generate tool paths for the machining of complex spherical surfaces based on an ultra-precise five-axis turning and milling machine with a C-Y-Z-X-B structure. Through the proposed tool path generation method, ultra-precise complex spherical surface machining was achieved. First, the complex spherical surface model was modeled and calculated, and then it was combined with the designed model to generate the tool path. Then the tool paths were generated with a numerically controlled (NC) program. Based on an ultra-precision three-coordinate measuring instrument and a white light interferometer, the machining accuracy of a workpiece surface was characterized, and t[1]he effectiveness of the provided tool path generation method was verified. The surface roughness of the machined workpiece was less than 90 nm. Furthermore, the surface roughness within the spherical region appeared to be less than 30 nm. The presented tool path generation method in this research produced ultra-precision spherical complex surfaces. The method could be applied to complex spherical surfaces with other characteristics.

A New Architecture of Tool Path Generation for Five-Axis Control Machining

2005 ◽  
pp. 501-506
Author(s):  
K. Nakamoto ◽  
K. Shirase ◽  
A. Morishita ◽  
E. Arai ◽  
T. Moriwaki
Keyword(s):  
Tool Path ◽  
Tool Path Generation ◽  
Path Generation ◽  
Five Axis

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

2016 ◽  
Vol 231 (1) ◽  
pp. 155-166 ◽  
Author(s):  
Hong-Zhou Fan ◽  
Shang-Jin Wang ◽  
Guang Xi ◽  
Yan-Long Cao
Keyword(s):  
Tool Path ◽  
Tool Path Generation ◽  
Ruled Surface ◽  
Centrifugal Impeller ◽  
Flank Milling ◽  
Path Generation ◽  
Rough Machining ◽  
Machining Time ◽  
Geometrical Structures ◽  
Five Axis

The centrifugal impeller with arbitrary surface blades is a very important component in automobile, ships, and aircraft industry, and it is one of the most difficult parts to process. Focusing on the machining efficiency improvement, combining the geometric advantages of ruled surface and arbitrary surface, and utilizing the efficient and accurate advantages of flank machining and point machining, this article presents a novel and targeted tool-path generation method and algorithm for five-axis flank machining of centrifugal impeller with arbitrary surface blades. In light of specific characters of different surfaces, the analyses of two different impeller blades are proposed first, the more characteristic and complex geometrical structures of the arbitrary blade are achieved. In rough machining, an approximate ruled surface blade is obtained, and a simple channel is achieved; the flank milling of the centrifugal impeller with ruled surface blades is achieved relative to the point milling of the centrifugal impeller with arbitrary surface blades; and the triangle tool path planning method is added in this process to save the machining time and cost collectively. Furthermore, in semi-finish machining, the approximate sub-ruled blade surfaces are calculated, and a new flank milling method of the sub-ruled blade surfaces is achieved; a new solution for tool interference is achieved in this process and the generation of non-interference tool paths becomes easy. Machining experiments of two different impellers are presented as a test of the proposed methods.

Sign in / Sign up

Export Citation Format

Share Document