Study on the solid-phase sintering of the nano-structured heavy tungsten alloy powder

2007 ◽  
Vol 434-435 ◽  
pp. 367-370 ◽  
Author(s):  
J.S.C. Jang ◽  
J.C. Fwu ◽  
L.J. Chang ◽  
G.J. Chen ◽  
C.T. Hsu
Keyword(s):  
Alloy Powder ◽  
Solid Phase ◽  
Tungsten Alloy ◽  
Heavy Tungsten Alloy

Influence of high-energy ball milling on the solid-phase sintering kinetics of ultrafine-grained heavy tungsten alloy

2017 ◽  
Vol 62 (9) ◽  
pp. 420-424 ◽  
Author(s):  
V. N. Chuvil’deev ◽  
A. V. Nokhrin ◽  
M. S. Boldin ◽  
N. V. Sakharov ◽  
G. V. Baranov ◽  
...  
Keyword(s):  
Ball Milling ◽  
Solid Phase ◽  
High Energy ◽  
High Energy Ball Milling ◽  
Tungsten Alloy ◽  
Sintering Kinetics ◽  
Ultrafine Grained ◽  
Energy Ball ◽  
Heavy Tungsten Alloy ◽  
Kinetics Of

Study of selected properties of the 98W-1.4Ni-0.6Fe heavy tungsten alloy

2021 ◽  
Vol 25 (3-4) ◽  
pp. 22-30
Author(s):  
Paweł Skoczylas
Keyword(s):  
Tensile Strength ◽  
Powder Metallurgy ◽  
Temperature Distribution ◽  
Liquid Phase ◽  
Outer Layer ◽  
Linear Shrinkage ◽  
Tungsten Alloy ◽  
Uniform Temperature ◽  
Sample Density ◽  
Heavy Tungsten Alloy

The aim of the work was to determine the density and tensile strength Rm of the sintered rod measured in selected places along its axis. The test rod with the composition of 98W-1.4Ni-0.6Fe was produced by powder metallurgy and sintering with the participation of the liquid phase. The performed measurements showed that the density of the samples depends on the place where the sample was taken from the bar and the amount of the outer layer removed by rolling. The densities of samples taken from the ends of the bar are higher than those taken from the center of the bar. The lowest density was obtained for ready-made strength samples. The performed measurements showed that for several samples the results of density and strength Rm are correlated. Gradually decreasing sample density translates into a decrease in their tensile strength. The lower density of samples from the central part of the bar can be related both to the linear shrinkage occurring during the process, as well as to the non-uniform temperature distribution in the sintering furnace space.

scholarly journals Testing of the Granulation Process for the Preparation of a Mixture with the Chemical Composition of a Heavy Tungsten Alloy

2020 ◽  
Vol 11 (2) ◽  
pp. 43-56
Author(s):  
Olgierd Janusz GOROCH ◽  
Zbigniew GULBINOWICZ ◽  
Katarzyna BARCZ ◽  
Paweł SKOCZYLAS ◽  
Mieczysław KACZOROWSKI
Keyword(s):  
Chemical Composition ◽  
End Users ◽  
Research Field ◽  
Tungsten Alloy ◽  
Granulation Process ◽  
The Subject ◽  
Heavy Tungsten Alloy ◽  
Physical And Chemical ◽  
Distinguishing Features

The subject of this paper are the results of testing the process of preparation of a granulate made of a mixture of powders with the chemical composition of a heavy tungsten alloy. Different methods of granulation are discussed which reveal how widely they vary in physical and chemical phenomena. It is a testament to how vast the research field of granulation of matter is. The importance and significance of granulation methods were proven with the distinguishing features of the granulated form of the stock materials and products compared to their powdered (dusty) form. Granulation is applied to produce convenient forms of products or intermediates which are acceptable to end users, and to facilitate or even enable the application of products and intermediates in appropriate technologies.

scholarly journals Powder Metallurgical Processing and Characterization of Molybdenum Addition to Tungsten Heavy Alloys by Spark Plasma Sintering

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5756
Author(s):  
A. Raja Annamalai ◽  
A. Muthuchamy ◽  
Muthe Srikanth ◽  
Senthilnathan Natarajan ◽  
Shashank Acharya ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Microstructural Characterization ◽  
Tungsten Alloy ◽  
Plasma Sintering ◽  
Heavy Alloys ◽  
Molybdenum Addition ◽  
Spark Plasma ◽  
Iron Nickel ◽  
Heavy Tungsten Alloy ◽  
High Level

The effect of adding molybdenum to the heavy tungsten alloy of W-Ni-Fe on its material characteristics was examined in the current study. The elemental powders of tungsten, iron, nickel, and molybdenum, with a composition analogous to W-3Fe-7Ni-xMo (x = 0, 22.5, 45, 67.5 wt.%), were fabricated using the spark plasma sintering (SPS) technique at a sintering temperature of 1400 °C and under pressure of 50 MPa. The sintered samples were subjected to microstructural characterization and tested for mechanical strength. The smallest grain size of 9.99 microns was observed for the 45W-45Mo alloy. This alloy also gave the highest tensile and yield strengths of 1140 MPa and 763 MPa, respectively. The hardness increased with the increased addition of molybdenum. The high level of hardness was observed for 67.5Mo with a 10.8% increase in the base alloy’s hardness. The investigation resulted in the alloy of 45W-7Ni-3Fe-45Mo, observed to provide optimum mechanical properties among all the analyzed samples.

scholarly journals Obtaining microdispersed iron-nickel powder in the process of electrochemical processing of VNZh type heavy tungsten alloys

2021 ◽  
Vol 12 (2-2021) ◽  
pp. 148-153
Author(s):  
O. G. Kuznetsova ◽  
◽  
A. M. Levin ◽  
M. A. Sevostyanov ◽  
◽  
...  
Keyword(s):  
Alkaline Solution ◽  
Nickel Powder ◽  
Alternating Current ◽  
Tungsten Alloy ◽  
Tungsten Alloys ◽  
Electrochemical Processing ◽  
Iron Nickel ◽  
Heavy Tungsten Alloy ◽  
Industrial Frequency

The process of electrochemical processing of the VNZh type heavy tungsten alloy (wt. %: 80 W, 16 Ni, 4 Fe) under the action of direct and alternating current of industrial frequency in an ammonia-alkaline solution has been investigated. It was found, that the process is accompanied by the transition of tungsten from the alloy to the solution and the formation of a microdispersed powder, based on iron and nickel.

Sign in / Sign up

Export Citation Format

Share Document