Extraction of coriander oil by twin-screw extruder: Screw configuration and operating conditions effect

2012 ◽  
Vol 40 ◽  
pp. 355-360 ◽  
Author(s):  
Jazia Sriti ◽  
Kamel Msaada ◽  
Thierry Talou ◽  
Mamadou Faye ◽  
Ika Amalia Kartika ◽  
...  
Keyword(s):  
Operating Conditions ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Extruder Screw ◽  
Twin Screw

CFD Simulation of a Co-rotating Twin-screw Extruder: Validation of a Rheological Model for a Starch-Based Dough for Snack Food

2017 ◽  
Vol 14 (2) ◽  
Author(s):  
Giorgia Tagliavini ◽  
Federico Solari ◽  
Roberto Montanari
Keyword(s):  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Operating Conditions ◽  
Second Phase ◽  
Snack Food ◽  
Suitable Model ◽  
Twin Screw Extruder ◽  
Parallel Plates ◽  
Screw Extruder ◽  
Twin Screw

AbstractThe extrusion of starch-based products has been a matter of interest, especially for the pasta and the snack food production. In recent years, twin-screw extruders for snack food have been studied from both structural and fluid dynamics viewpoints. This project started from the rheological characterization of a starch-based dough (corn 34 wt%, tapioca 32 wt%), comparing viscosity values acquired in laboratory with different theoretical models found in literature. A computational fluid dynamic (CFD) simulation recreating the simple case of a fluid flow between two parallel plates was carried out to validate the former comparison. After the rheological validation was completed, the second phase of this work covered a 3D CFD simulation of the first part of the twin-screw extruder (feeding zone). The objective was to find a suitable model for describing the dough rheological behavior and the operating conditions of a co-rotating intermeshing twin-screw extruder. Once the model would be defined, it would allow to investigate several working conditions and different screws geometries of the machine, predicting the evolution of the product rheological properties.

Study of a novel co-rotating non-twin screw extruder in processing flame retardant polymer materials

2017 ◽  
Vol 37 (8) ◽  
pp. 827-835
Author(s):  
Song Zhao ◽  
Baiping Xu ◽  
Liang He ◽  
Huiwen Yu ◽  
Shouzai Tan
Keyword(s):  
Flame Retardant ◽  
Mechanical Performance ◽  
Acrylonitrile Butadiene Styrene ◽  
Operating Conditions ◽  
Polymer Materials ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Limiting Oxygen Index ◽  
Twin Screw ◽  
Halogen Free

Abstract A thorough study was carried out to investigate the priority of a novel co-rotating non-twin screw extruder (NTSE) over a traditional twin screw extruder (TSE) in the mixing process of halogen-free intumescent flame-retardant acrylonitrile-butadiene-styrene (ABS) composites. The homogeneity of the flame-retardant additives of the composites processed by NTSE and TSE under the same operating conditions was characterized by using mechanical performance properties, limiting oxygen index values, UL-94 tests, and thermogravimetric analysis. All the results suggested that NTSE could achieve better mixing of the flame-retardant additives in the polymer matrix than TSE, which was further clarified by the scanning electron microscope pictures.

Steady and Transient Flow of a Non-Newtonian Chemically Reactive Fluid in a Twin-Screw Extruder

2001 ◽  
Author(s):  
W. Zhu ◽  
Y. Jaluria
Keyword(s):  
Steady State ◽  
Response Time ◽  
Transient Flow ◽  
Transient Behavior ◽  
Operating Conditions ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Twin Screw ◽  
Calculated Velocity ◽  
Screw Extruders

Abstract The flow of chemically reactive non-Newtonian materials, such as bio-polymers and aciylates, in a fully intermeshing, co-rotating twin-screw extruder is numerically investigated. A detailed study of the system transient behavior is carried out. The main transient aspects, including response time, variation of system variables, and instability of operation, are studied for both single- and twin-screw extruders. The effect of a time-dependent variation in the boundary conditions is studied. The coupling due to conduction heat transfer in the screw barrel is found to be very important and is taken into account for single-screw extruders. In the absence of this conjugate coupling, the response time is much shorter. Several other interesting trends are obtained with respect to the dependence of the transient response on the fluid, materials, and operating conditions. Steady state results are obtained at large time. The calculated velocity distributions in the screw channel are compared with experimental results in the literature for steady state flow and good agreement has been obtained. The numerical results show that not all desired operating conditions are feasible. The calculated results for transient transport agree with the few experimental observations available on this system. These results will be useful in the design, control and optimization of polymer extrusion processes.

The Study of the Extruder Screw for the Rubber and Plastics Blend

2011 ◽  
Vol 221 ◽  
pp. 582-585 ◽  
Author(s):  
Guan Zhong Wang
Keyword(s):  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Extruder Screw ◽  
Twin Screw

The recent development in the fabrication of extruder, especially screw extruder, for the rubber and plastics blend were reviewed. A differential twin screw extruder was developed and employed for the rubber and plastic blend in the present work.

Sign in / Sign up

Export Citation Format

Share Document