A new correlation of two-phase frictional pressure drop for evaporating flow in pipes

2012 ◽  
Vol 35 (7) ◽  
pp. 2039-2050 ◽  
Author(s):  
Yu Xu ◽  
Xiande Fang
Keyword(s):  
Pressure Drop ◽  
Two Phase ◽  
Frictional Pressure Drop ◽  
New Correlation

Evaluation Analysis of Prediction Methods for Two-Phase Flow Pressure Drop in Mini-Channels

2008 ◽  
Author(s):  
Licheng Sun ◽  
Kaichiro Mishima
Keyword(s):  
Pressure Drop ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Turbulent Region ◽  
Frictional Pressure Drop ◽  
New Correlation ◽  
Mini Channels ◽  
Flow Pressure ◽  
Better Than

2092 data of two-phase flow pressure drop were collected from 18 published papers of which the working fluids include R123, R134a, R22, R236ea, R245fa, R404a, R407C, R410a, R507, CO2, water and air. The hydraulic diameter ranges from 0.506 to 12mm; Relo from 10 to 37000, and Rego from 3 to 4×105. 11 correlations and models for calculating the two-phase frictional pressure drop were evaluated based upon these data. The results show that the accuracy of the Lockhart-Martinelli method, Mishima and Hibiki correlation, Zhang and Mishima correlation and Lee and Mudawar correalion in the laminar region is very close to each other, while the Muller-Steinhagen and Heck correlation is the best among the evaluated correlations in the turbulent region. A modified Chisholm correlation was proposed, which is better than all of the evaluated correlations in the turbulent region and its mean relative error is about 29%. For refrigerants only, the new correlation and Muller-Steinhagen and Heck correlation are very close to each other and give better agreement than the other evaluated correlations.

Pressure Drop Correlations of Single-Phase and Two-Phase Flow in Rolling Tubes

2006 ◽  
Author(s):  
Xia-Xin Cao ◽  
Chang-Qi Yan ◽  
Pu-Zhen Gao ◽  
Zhong-Ning Sun
Keyword(s):  
Experimental Data ◽  
Pressure Drop ◽  
Single Phase ◽  
Experimental Studies ◽  
Frictional Coefficient ◽  
Bubble Flow ◽  
Two Phase ◽  
Frictional Pressure Drop ◽  
Rolling Condition ◽  
New Correlation

A series of experimental studies of frictional pressure drop for single phase and two-phase bubble flow in smooth rolling tubes were carried out. The tube inside diameters were 15mm, 25mm and 34.5mm respectively, the rolling angles of tubes could be set as 10° and 20°, and the rolling periods could be set as 5s, 10s and 15s. Combining with the analysis of single-phase water motion, it was found that the traditional correlations for calculating single-phase frictional coefficient were not suitable for the rolling condition. Based on the experimental data, a new correlation for calculating single-phase frictional coefficient under rolling condition was presented, and the calculations not only agreed well with the experimental data, but also could display the periodically dynamic characteristics of frictional coefficients. Applying the new correlation to homogeneous flow model, two-phase frictional pressure drop of bubble flow in rolling tubes could be calculated, the results showed that the relative error between calculation and experimental data was less than ± 25%.

PRESSURE DROP CHARACTERISTICS OF R410A-OIL MIXTURE FLOW BOILING IN SMALL SMOOTH TUBES

2010 ◽  
Vol 18 (02) ◽  
pp. 109-116 ◽  
Author(s):  
YIFENG GAO ◽  
BIN DENG ◽  
GUOLIANG DING ◽  
HAITAO HU ◽  
XIANGCHAO HUANG
Keyword(s):  
Pressure Drop ◽  
Flow Boiling ◽  
Smooth Tube ◽  
Two Phase ◽  
Experimental Conditions ◽  
Mixture Flow ◽  
Frictional Pressure Drop ◽  
New Correlation ◽  
Smooth Tubes ◽  
Local Properties

This study presents experimental frictional pressure drop for R410A/oil mixture flow boiling in small horizontal smooth tubes with inside diameters of 4.18 mm and 2.0 mm. Experimental conditions cover nominal oil concentrations from 0 to 5%. The test results show that the presence of oil enhances two-phase frictional pressure drop about 0–120% and 0–90% at present test conditions for 4.18 mm I.D. smooth tube and 2.0 mm I.D. smooth tube, respectively, and the enhanced effect is more evident at higher vapor qualities where the local oil concentrations are higher. A new correlation to predict the local frictional pressure drop of R410A/oil mixture flow boiling inside conventional size and small smooth tubes is developed based on local properties of refrigerant–oil mixture, and the experimental data of 4.18 mm I.D. and 2.0 mm I.D. smooth tubes and that of 6.34 mm I.D. smooth tube (Hu et al., 2008) are well-correlated with the new correlation.

Experimental and Prediction Methods Investigation of Two-Phase Frictional Pressure Drop in Rectangular Narrow Channel

2013 ◽  
Author(s):  
Dong Huang ◽  
Pu-zhen Gao
Keyword(s):  
Experimental Data ◽  
Pressure Drop ◽  
Narrow Channel ◽  
Mean Deviation ◽  
Prediction Methods ◽  
Vapor Mixture ◽  
Two Phase ◽  
Frictional Pressure Drop ◽  
Viscosity Models ◽  
New Correlation

An experimental investigation on two-phase frictional pressure drop of water-vapor mixture was conducted in a vertical rectangular narrow channel. The present experimental data were carefully analyzed and compared against the homogenous model, including several well-known two-phase viscosity models. The results reveal that the models using two-phase viscosity proposed by Cicchitti and Dukler provide the relatively accurate predictions, while McAdams, Beattie-Whalley, Lin and Awad-Muzychka poorly predicted the database. Considering the effects of surface tension, gravity, channel size and mass flux, a new correlation for two-phase frictional pressure drop in rectangular narrow channel was developed based on the Cicchitti model. The new correlation predict the experimental data with a mean deviation of 18.7%.

Two-phase pressure drop due to friction in micro-channel

2013 ◽  
Vol 228 (5) ◽  
pp. 921-931 ◽  
Author(s):  
Tae-Woo Lim ◽  
Sam-Sang You ◽  
Jong-Su Kim ◽  
Serng-Bae Moon ◽  
Dong-Hoan Seo
Keyword(s):  
Pressure Drop ◽  
Flow Boiling ◽  
Homogeneous Model ◽  
Absolute Error ◽  
Heat Fluxes ◽  
Micro Channel ◽  
Two Phase ◽  
Pressure Drops ◽  
Frictional Pressure Drop ◽  
New Correlation

This paper deals with an experimental investigation to measure the frictional pressure drops for two-phase flow boiling in a micro-channel with a hydraulic diameter of 500 µm. First, the experimental study is performed under the test conditions: heat fluxes ranging from 100 to 400 kW/m2, vapor qualities from 0 to 0.2, and mass fluxes of 200, 400 and 600 kg/m2s. Then, the frictional pressure drop during flow boiling is estimated using two models: the homogeneous model and the separated flow model. The experimental results show that the two-phase multiplier decreases with the increase of mass flux. In addition, the measured pressure drops are compared with those from a few correlation models available for macro-scales and mini/micro-scales. Finally, the present paper proposes a new correlation for two-phase frictional pressure drops in mini/micro-scales. This correlation model is developed based on the Chisholm constant C as a function of two-phase Reynolds and Weber numbers. It is found that the new correlation satisfactorily predicts the experimental data within mean absolute error (MAE) of 3.9%.

Effect of Tube Diameter on Flow Phenomena of Gas-Liquid Two-Phase Flow in Microchannels

2015 ◽  
Author(s):  
Hideo Ide ◽  
Eiji Kinoshita ◽  
Ryo Kuroshima ◽  
Takeshi Ohtaka ◽  
Yuichi Shibata ◽  
...  
Keyword(s):  
Pressure Drop ◽  
High Speed ◽  
Water Solution ◽  
Flow Direction ◽  
Flow Characteristics ◽  
Tube Diameter ◽  
Two Phase ◽  
Frictional Pressure Drop ◽  
Flow Phenomena ◽  
The Waves

Gas-liquid two-phase flows in minichannels and microchannels display a unique flow pattern called ring film flow, in which stable waves of relatively large amplitudes appear at seemingly regular intervals and propagate in the flow direction. In the present work, the velocity characteristics of gas slugs, ring films, and their features such as the gas slug length, flow phenomena and frictional pressure drop for nitrogen-distilled water and nitrogen-30 wt% ethanol water solution have been investigated experimentally. Four kinds of circular microchannels with diameters of 100 μm, 150 μm, 250 μm and 518 μm were used. The effects of tube diameter and physical properties, especially the surface tension and liquid viscosity, on the flow patterns, gas slug length and the two-phase frictional pressure drop have been investigated by using a high speed camera at 6,000 frames per second. The flow characteristics of gas slugs, liquid slugs and the waves of ring film are presented in this paper.

scholarly journals Frictional Pressure Drop and Liquid Holdup of Churn Flow in Vertical Pipes with Different Viscosities

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Zilong Liu ◽  
Yubin Su ◽  
Ming Lu ◽  
Zilong Zheng ◽  
Ruiquan Liao
Keyword(s):  
Pressure Drop ◽  
Liquid Velocity ◽  
Gas Velocity ◽  
Liquid Holdup ◽  
Two Phase ◽  
Frictional Pressure Drop ◽  
Viscous Oil ◽  
Predicted Values ◽  
Superficial Gas Velocity ◽  
Churn Flow

Churn flow commonly exists in the pipe of heavy oil, and the characteristics of churn flow should be widely understood. In this paper, we carried out air and viscous oil two-phase flow experiments, and the diameter of the test section is 60 mm. The viscosity range of the oil was 100~480 mPa·s. Based on the measured liquid holdup and pressure drop data of churn flow, it can be concluded that, due to the existence of liquid film backflow, positive and negative frictional pressure drop can be found and the change of frictional pressure drop with the superficial gas velocity is related to superficial liquid velocity. With the increase of viscosity, the change rate of frictional pressure drop increases with the increase of the superficial gas velocity. Combining our previous work and the Taitel model, we proposed a new pressure drop model for viscous oil-air two-phase churn flow in vertical pipes. By comparing the predicted values of existing models with the measured pressure drop data, the proposed model has better performance in predicting the pressure drop.

Sign in / Sign up

Export Citation Format

Share Document