scholarly journals Residential CO2 heat pump system for combined space heating and hot water heating

2005 ◽  
Vol 28 (8) ◽  
pp. 1259-1265 ◽  
Author(s):  
Jørn Stene
Keyword(s):  
Heat Pump ◽  
Hot Water ◽  
Space Heating ◽  
Water Heating ◽  
Pump System ◽  
Heat Pump System

Simulation Study on Solar Collector - Air Source Heat Pump Combined System for Space Heating in Cold Region

2012 ◽  
Vol 238 ◽  
pp. 478-481
Author(s):  
Zhen Qing Wang ◽  
Yan Chen ◽  
Hai Xia Wang
Keyword(s):  
Heat Pump ◽  
Simulation Study ◽  
Hot Water ◽  
Office Building ◽  
Space Heating ◽  
Combined System ◽  
Pump System ◽  
Heat Pump System ◽  
Heating And Cooling ◽  
Air Source Heat Pump

An air source heat pump system (ASHPS) was set up, which provided space heating and cooling, as well as hot water for an office building in Tianjin. Its operating performance in winter was evaluated based on test data. Considering the local abundant solar radiation and the way to provide energy in an office building, a simulation study was carried out on the combsystem of ASHP and flat plate air collector (FPAC). The effects of collector area and its outlet parameters on the heating performance of ASHP were studied, and the favorable operating and matching mode were recommended. The results indicate that ASHPS is a technically viable method in Tianjin in winter, but not economically, and the air-solar combsystem should be taken into account for its massive replacement for conventional energy.

Modelling of an Indirect Solar-Assisted Heat Pump System for a High Performance Residential House

2013 ◽  
Author(s):  
Jenny Chu ◽  
Cynthia A. Cruickshank ◽  
Wilkie Choi ◽  
Stephen J. Harrison
Keyword(s):  
Heat Pump ◽  
High Performance ◽  
Simulation Software ◽  
Hot Water ◽  
Solar Thermal ◽  
Working Fluid ◽  
Space Heating ◽  
Pump System ◽  
Heat Pump System ◽  
Solar Thermal Collectors

Heat pumps are commonly used for residential space-heating and cooling. The combination of solar thermal and heat pump systems as a single solar-assisted heat pump (SAHP) system can significantly reduce residential energy consumption in Canada. As a part of Team Ontario’s efforts to develop a high performance house for the 2013 DOE Solar Decathlon Competition, an integrated mechanical system (IMS) consisting of a SAHP was investigated. The system is designed to provide domestic hot water, space-heating, space-cooling and dehumidification. The system included a cold and a hot thermal storage tank and a heat pump to move energy from the low temperature reservoir, to the hot. The solar thermal collectors supplies heat to the cold storage and operate at a higher efficiency due to the heat pump reducing the temperature of the collector working fluid. The combination of the heat pump and solar thermal collectors allows more heat to be harvested at a lower temperature, and then boosted to a suitable temperature for domestic use via the heat pump. The IMS and the building’s energy loads were modeled using the TRNSYS simulation software. A parametric study was conducted to optimize the control, sizing and configuration of the system. This paper provides an overview of the model and summarizes the results of the study. The simulation results suggested that the investigated system can achieve a free energy ratio of about 0.583 for a high performance house designed for the Ottawa climate.

Research on Composite System of Solar Energy Reclaimed Water Heat Pump and Phase Change Energy Storage

2014 ◽  
Vol 521 ◽  
pp. 56-59
Author(s):  
Hui Xing Li ◽  
Peng Cheng ◽  
Guo Hui Feng ◽  
Ran Zhang
Keyword(s):  
Heat Pump ◽  
Operating Cost ◽  
Reclaimed Water ◽  
Water Source ◽  
Heating System ◽  
Hot Water ◽  
Water Heating ◽  
Pump System ◽  
Heat Pump System ◽  
Important Approach

New energy development and utilization is an important approach to solve the problem of energy shortage,a new type of composite heating system is proposed in this study. It expounds the research ideas, the technical principle and operation plan of the system. Through a comparative analysis of the performance coefficient of composite heating system, reclaimed water source heat pump system and solar hot water heating system, it Comes to the conclusions that the composite heating system can not only reduce the operating cost but also improve the running performance of reclaimed water source heat pump and reduce the heat loss of solar hot water heating system.

Performance study on photovoltaic thermal building façade component in multi-energy generation during winter

2021 ◽  
pp. 014362442199197
Author(s):  
Ahmad Riaz ◽  
Chao Zhou ◽  
Ruobing Liang ◽  
Jili Zhang
Keyword(s):  
Heat Pump ◽  
Weather Conditions ◽  
Electrical Energy ◽  
Energy Generation ◽  
Hot Water ◽  
Performance Study ◽  
Water Heating ◽  
Pump System ◽  
Heat Pump System ◽  
Building Facade

Photovoltaic thermal systems have gained tremendous popularity in the production of electric and thermal energy. In this paper, the photovoltaic thermal modules for the building façade assisted by heat pump system is proposed which combines the photovoltaic modules with an evaporator part of the heat pump system to produce hot water and electrical energy. Also, the photovoltaic thermal panels are used to preheat the cold ambient fresh air without heat pump operation. The proposed system was constructed at the Institute of Building Energy, Dalian University of Technology, China to study the ambient fresh air heating characteristic, electrical power generation, and hot water generation through performance evaluation indices under natural weather conditions. It was found that the average electrical, thermal, and overall efficiencies are 8.8%, 26%, and 50%, respectively during the pre-heating of fresh air. While the average air temperature is 15.2°C inside an air gap. The average COP for water heating is 3.91 during the water heating mode. This study could be used as a guide for photovoltaic thermal solar-assisted heat pump systems on building envelopes in a multi-energy generation under different weather conditions. Practical application: The study considers the photovoltaic thermal modules for building façade not only to generate the electrical energy and pre-heated fresh air but also to generate the hot water when assisted with the heat pump system. This research could assist researchers and engineers in the field of photovoltaic thermal façade systems in multi-energy generation such as for the production of electricity, heated/cooled fresh air, and hot water generation.

DETERMINING THE PROFITABILITY OF GREENHOUSE ELECTROTECHNOLOGIES: A MODELING APPROACH

HortScience ◽  
1994 ◽  
Vol 29 (4) ◽  
pp. 249a-249
Author(s):  
Eric A. Lavoie ◽  
Damien de Halleux ◽  
André Gosselin ◽  
Jean-Claude Dufour
Keyword(s):  
Energy Consumption ◽  
Heat Pump ◽  
Water System ◽  
Heat Pumps ◽  
Hot Water ◽  
Pump System ◽  
Heat Pump System ◽  
Artificial Lighting ◽  
Hot Air ◽  
Marketable Fruit

The main objective of this research was to produce a simulated model that permitted the evaluation of operating costs of commercial greenhouse tomato growers with respect to heating methods (hot air, hot water, radiant and heat pumps) and the use of artificial lighting for 1991 and 1992. This research showed that the main factors that negatively influence profitability were energy consumption during cold periods and the price of tomatoes during the summer season. The conventional hot water system consumed less energy than the heat pump system and produced marketable fruit yields similar to those from the heat pump system. The hot water system was generally more profitable in regards to energy consumption and productivity. Moreover, investment costs were less; therefore, this system gives best overall financial savings. As for radiant and hot air systems, their overall financial status falls between that of the hot water system and the heat pump. The radiant system proved to be more energy efficient that the hot air system, but the latter produced a higher marketable fruit yield over the 2-year study.

Energy Consumption Modeling of a Heat Pump System for Combined Space Conditioning and Residential Water Heating in a Typical Household in Quito, Ecuador

2016 ◽  
Author(s):  
Gabriel Agila ◽  
Guillermo Soriano
Keyword(s):  
Energy Consumption ◽  
Heat Pump ◽  
Thermal Storage ◽  
Hot Water ◽  
Water Heating ◽  
Water Heater ◽  
Pump System ◽  
Detailed Model ◽  
Heat Pump Water Heater ◽  
Residential Water

This research develops a detailed model for a Water to Water Heat Pump Water Heater (HPWH), operating for heating and cooling simultaneously, using two water storage tanks as thermal deposits. The primary function of the system is to produce useful heat for domestic hot water services according to the thermal requirements for an average household (two adults and one child) in the city of Quito, Ecuador. The purpose of the project is to analyze the technical and economic feasibility of implementing thermal storage and heat pump technology to provide efficient thermal services and reduce energy consumption; as well as environmental impacts associated with conventional systems for residential water heating. An energy simulation using TRNSYS 17 is carried to evaluate model operation for one year. The purpose of the simulation is to assess and quantifies the performance, energy consumption and potential savings of integrating heat pump systems with thermal energy storage technology, as well as determines the main parameter affecting the efficiency of the system. Finally, a comparative analysis based on annual energy consumption for different ways to produce hot water is conducted. Five alternatives were examined: (1) electric storage water heater; (2) gas fired water heater; (3) solar water heater; (4) air source heat pump water heater; and (5) a heat pump water heater integrated with thermal storage.

Sign in / Sign up

Export Citation Format

Share Document