scholarly journals Experimental study on bubble dynamics and wall heat transfer arising from a single nucleation site at subcooled flow boiling conditions – Part 2: Data analysis on sliding bubble characteristics and associated wall heat transfer

2016 ◽  
Vol 84 ◽  
pp. 292-314 ◽  
Author(s):  
Junsoo Yoo ◽  
Carlos E. Estrada-Perez ◽  
Yassin A. Hassan
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Data Analysis ◽  
Bubble Dynamics ◽  
Flow Boiling ◽  
Nucleation Site ◽  
Wall Heat Transfer ◽  
Subcooled Flow Boiling ◽  
Subcooled Flow ◽  
Bubble Characteristics

Subcooled Flow Boiling Inception and Heat Transfer of Water in a Circular Tube Under Pulsatile Flow

2018 ◽  
Author(s):  
Hongsheng Yuan ◽  
Sichao Tan ◽  
Kun Cheng ◽  
Xiaoli Wu ◽  
Chao Guo ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Steady Flow ◽  
Flow Rate ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Nucleation Site ◽  
Subcooled Flow Boiling ◽  
Average Heat ◽  
Subcooled Flow

The flow rate can fluctuate in offshore nuclear power systems which are exposed to wind and waves, as well as in loops where flow instabilities occur, resulting in different thermal-hydraulic characteristics compared with that under steady flow. Among the thermal-hydraulic characteristics, onset of nucleate boiling (ONB) model determines whether the fluid is boiling, and boiling heat transfer is crucial to equipment performance and safety, both being key issues in subcooled flow boiling. Therefore, an experimental study was conducted to investigate how an imposed periodic flow oscillation affects the boiling inception and heat transfer of subcooled flow boiling of water in a vertical tube. The experiments were conducted under atmospheric pressure with the average flow rate ranging from 96kg/m2s to 287kg/m2s and heat flux ranging from 10kW/m2 to 197kW/m2. The relative pulsatile amplitude range is 0.1–0.3 and pulsatile period range is 10s-30s. Photographic images and thermal parameters such as temperatures and flow rate were recorded. The lack of nucleation site on the heated surface of the test section results in high wall superheat at ONB. The effects of pulsatile amplitude and period on superheat at boiling onset and average heat transfer were analyzed. The results show that the superheat at boiling inception is decreased when the average heat flux is lower than the heat flux at boiling inception of the corresponding steady flow, and the superheat at boiling onset is increased when the average heat flux is higher than the heat flux at boiling onset of the corresponding steady flow. The above effect of flow rate pulsation on superheat increases with increasing amplitude and decreasing period, and the mechanism can be explained by boiling nucleation theory. The lack of large active nucleation site also affects the boiling heat transfer. By comparing the contribution of nucleate boiling to heat transfer with the widely used Cooper’s pool boiling correlation, the subcooled flow boiling was found suppressed by convection. The average heat transfer of both the intermittent flow boiling and the single phase flow is influenced by flow oscillation.

Sign in / Sign up

Export Citation Format

Share Document