Pore-scale simulation of gas diffusion in unsaturated soil aggregates: Accuracy of the dusty-gas model and the impact of saturation

Geoderma ◽  
2017 ◽  
Vol 303 ◽  
pp. 196-203 ◽  
Author(s):  
Zhongyang Li ◽  
Xiaoxian Zhang ◽  
Yuan Liu
Keyword(s):  
Unsaturated Soil ◽  
Soil Aggregates ◽  
Gas Diffusion ◽  
Dusty Gas ◽  
Pore Scale ◽  
Dusty Gas Model ◽  
The Impact

Analytical Expression for Concentration Overpotential of Anode-Supported Solid Oxide Fuel Cell Based on the Dusty Gas Model

2020 ◽  
Vol 17 (3) ◽  
Author(s):  
Sandipan Kumar Das
Keyword(s):  
Fuel Cell ◽  
Concentration Polarization ◽  
Porous Electrode ◽  
Analytical Framework ◽  
Gas Diffusion ◽  
Solid Oxide ◽  
Dusty Gas ◽  
Oxide Fuel ◽  
Viscous Effects ◽  
Dusty Gas Model

Abstract The Dusty Gas model (DGM), despite being arguably the most accurate representation of gas diffusion in electrodes, is not readily adopted in the literature as it entails relatively expensive numerical integration of differential equations for concentration polarization calculations. To address this issue, this article demonstrates an analytical procedure to solve the DGM equations in a fuel cell electrode setting. In the process, it highlights the differences with previous attempts in the literature and improves upon the shortcomings. This paper specifically provides explicit expressions of concentration overpotentials of anode-supported solid oxide fuel cells (SOFCs) for binary and ternary gas systems via the analytical solution of DGM equations in one dimension without considering the viscous effects. The model predictions match very well with the experimental data available in the open literature. This paper also provides a semi-analytical framework for higher-order multicomponent systems. Finally, the effect of the pore-size distribution in the porous electrode on the concentration polarization is thoroughly explored.

The impact of porosity on organic matter cycling in a two-dimensional porous medium 

2021 ◽  
Author(s):  
Hanbang Zou ◽  
Pelle Ohlsson ◽  
Edith Hammer
Keyword(s):  
Porous Medium ◽  
Organic Matter ◽  
Carbon Sequestration ◽  
Soil Carbon ◽  
Pore Network ◽  
Pore Scale ◽  
Decomposition Of Organic Matter ◽  
Organic Matter Cycling ◽  
The Impact

<p>Carbon sequestration has been a popular research topic in recent years as the rapid elevation of carbon emission has significantly impacted our climate. Apart from carbon capture and storage in e.g. oil reservoirs, soil carbon sequestration offers a long term and safe solution for the environment and human beings. The net soil carbon budget is determined by the balance between terrestrial ecosystem sink and sources of respiration to atmospheric carbon dioxide. Carbon can be long term stored as organic matters in the soil whereas it can be released from the decomposition of organic matter. The complex pore networks in the soil are believed to be able to "protect" microbial-derived organic matter from decomposition. Therefore, it is important to understand how soil structure impacts organic matter cycling at the pore scale. However, there are limited experimental studies on understanding the mechanism of physical stabilization of organic matter. Hence, my project plan is to create a heterogeneous microfluidic porous microenvironment to mimic the complex soil pore network which allows us to investigate the ability of organisms to access spaces starting from an initial ecophysiological precondition to changes of spatial accessibility mediated by interactions with the microbial community.</p><p>Microfluidics is a powerful tool that enables studies of fundamental physics, rapid measurements and real-time visualisation in a complex spatial microstructure that can be designed and controlled. Many complex processes can now be visualized enabled by the development of microfluidics and photolithography, such as microbial dynamics in pore-scale soil systems and pore network modification mimicking different soil environments – earlier considered impossible to achieve experimentally. The microfluidic channel used in this project contains a random distribution of cylindrical pillars of different sizes so as to mimic the variations found in real soil. The randomness in the design creates various spatial availability for microbes (preferential flow paths with dead-end or continuous flow) as an invasion of liquids proceeds into the pore with the lowest capillary entry pressure. In order to study the impact of different porosity in isolation of varying heterogeneity of the porous medium, different pore size chips that use the same randomly generated pore network is created. Those chips have the same location of the pillars, but the relative size of each pillar is scaled. The experiments will be carried out using sterile cultures of fluorescent bacteria, fungi and protists, synthetic communities of combinations of these, or a whole soil community inoculum. We will quantify the consumption of organic matter from the different areas via fluorescent substrates, and the bio-/necromass produced. We hypothesise that lower porosity will reduce the net decomposition of organic matter as the narrower pore throat limits the access, and that net decomposition rate at the main preferential path will be higher than inside branches</p>

Numerical Modeling of Multi-Frequency Complex Dielectric Permittivity Dispersion of Sedimentary Rocks

Geophysics ◽  
2021 ◽  
pp. 1-69
Author(s):  
Artur Posenato Garcia ◽  
Zoya Heidari
Keyword(s):  
Numerical Simulation ◽  
Dielectric Permittivity ◽  
Numerical Simulations ◽  
Dielectric Response ◽  
Water Saturation ◽  
Pore Scale ◽  
Simulation Results ◽  
Wet Rocks ◽  
Permittivity Measurements ◽  
The Impact

The dielectric response of rocks results from electric double layer (EDL), Maxwell-Wagner (MW), and dipolar polarizations. The EDL polarization is a function of solid-fluid interfaces, pore water, and pore geometry. MW and dipolar polarizations are functions of charge accumulation at the interface between materials with contrasting impedances and the volumetric concentration of its constituents, respectively. However, conventional interpretation of dielectric measurements only accounts for volumetric concentrations of rock components and their permittivities, not interfacial properties such as wettability. Numerical simulations of dielectric response of rocks provides an ideal framework to quantify the impact of wettability and water saturation ( Sw) on electric polarization mechanisms. Therefore, in this paper we introduce a numerical simulation method to compute pore-scale dielectric dispersion effects in the interval from 100 Hz to 1 GHz including impacts of pore structure, Sw, and wettability on permittivity measurements. We solve the quasi-electrostatic Maxwell's equations in three-dimensional (3D) pore-scale rock images in the frequency domain using the finite volume method. Then, we verify simulation results for a spherical material by comparing with the corresponding analytical solution. Additionally, we introduce a technique to incorporate α-polarization to the simulation and we verify it by comparing pore-scale simulation results to experimental measurements on a Berea sandstone sample. Finally, we quantify the impact of Sw and wettability on broadband dielectric permittivity measurements through pore-scale numerical simulations. The numerical simulation results show that mixed-wet rocks are more sensitive than water-wet rocks to changes in Sw at sub-MHz frequencies. Furthermore, permittivity and conductivity of mixed-wet rocks have weaker and stronger dispersive behaviors, respectively, when compared to water-wet rocks. Finally, numerical simulations indicate that conductivity of mixed-wet rocks can vary by three orders of magnitude from 100 Hz to 1 GHz. Therefore, Archie’s equation calibrated at the wrong frequency could lead to water saturation errors of 73%.

Sign in / Sign up

Export Citation Format

Share Document