Modeling the acentric factor of binary and ternary mixtures of ionic liquids using advanced intelligent systems

2020 ◽  
Vol 516 ◽  
pp. 112587 ◽  
Author(s):  
Teslim Olayiwola ◽  
Oghenerume Ogolo ◽  
Falola Yusuf
Keyword(s):  
Ionic Liquids ◽  
Intelligent Systems ◽  
Ternary Mixtures ◽  
Acentric Factor ◽  
Binary And Ternary Mixtures

Phase Equilibrium Study of Binary and Ternary Mixtures of Ionic Liquids + Acetone + Methanol

2014 ◽  
Vol 59 (12) ◽  
pp. 3975-3981 ◽  
Author(s):  
Wenxiu Li ◽  
Dezhang Sun ◽  
Tao Zhang ◽  
Yanhong Huang ◽  
Lin Zhang ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Phase Equilibrium ◽  
Ternary Mixtures ◽  
Equilibrium Study ◽  
Phase Equilibrium Study ◽  
Binary And Ternary Mixtures

Binary and Ternary Mixtures of MFSA (M = Li, K, Cs) as New Inorganic Ionic Liquids

2019 ◽  
Vol 16 (24) ◽  
pp. 91-98 ◽  
Author(s):  
Keigo Kubota ◽  
Toshiyuki Nohira ◽  
Goto Takuya ◽  
Rika Hagiwara
Keyword(s):  
Ionic Liquids ◽  
Ternary Mixtures ◽  
Binary And Ternary Mixtures

Energy saving technology for sintering of black bricks from high-siliceous clay

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3123-3131
Author(s):  
Mario Flores Nicolas ◽  
Marina Vlasova ◽  
Pedro Antonio Márquez Aguilar ◽  
Mykola Kakazey ◽  
Marcos Mauricio Chávez Cano ◽  
...  
Keyword(s):  
Low Temperature ◽  
Oxygen Deficiency ◽  
Glass Ceramics ◽  
Total Content ◽  
Ceramic Materials ◽  
Ternary Mixtures ◽  
High Porosity ◽  
Reducing Conditions ◽  
Binary And Ternary Mixtures ◽  
Dark Color

AbstractThe low-temperature synthesis of bricks prepared from high-siliceous clays by the method of plastic molding of blanks was used. For the preparation of brick blanks, binary and ternary mixtures of high-siliceous clays, black sand, and bottle glass cullet were used. Gray-black low-porosity and high-porosity ceramics was obtained by sintering under conditions of oxygen deficiency. It has been established that to initiate plastic in mixtures containing high-siliceous clay, it is necessary to add montmorillonite/bentonite additives, carry out low-temperature sintering, and introduce low-melting glass additives with a melting point ranging from 750 to 800 °C. The performed investigations have shown that the sintering of mixtures with a total content of iron oxide of about 5 wt% under reducing conditions at Tsint. = 800°C for 8 h leads to the formation of glass ceramics consisting of quartz, feldspars, and a phase. The main sources of the appearance of a dark color is the formation of [Fe3+O4]4- and [Fe3+O6]9- anions in the composition of the glass phase and feldspars. By changing the contents of clay, sand, and glass in sintering, it is possible to obtain two types of ceramic materials: (a) in the form of building bricks and (b) in the form of porous fillers.

Properties of Refrigerants from Cubic Equations of State

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Viorel Feroiu ◽  
Dan Geana ◽  
Catinca Secuianu
Keyword(s):  
Experimental Data ◽  
Vapor Pressure ◽  
Equations Of State ◽  
Ternary Mixtures ◽  
Volumetric Properties ◽  
Mixing Rules ◽  
Saturation Curve ◽  
Equilibrium Thermodynamic ◽  
Liquid Equilibrium ◽  
Binary And Ternary Mixtures

Vapour � liquid equilibrium, thermodynamic and volumetric properties were predicted for three pure hydrofluorocarbons: difluoromethane (R32), pentafluoroethane (R125) and 1,1,1,2 � tetrafluoroethane (R134a) as well as for binary and ternary mixtures of these refrigerants. Three cubic equations of state GEOS3C, SRK (Soave � Redlich � Kwong) and PR (Peng � Robinson) were used. A wide comparison with literature experimental data was made. For the refrigerant mixtures, classical van der Waals mixing rules without interaction parameters were used. The GEOS3C equation, with three parameters estimated by matching several points on the saturation curve (vapor pressure and corresponding liquid volumes), compares favorably to other equations in literature, being simple enough for applications.

Sign in / Sign up

Export Citation Format

Share Document