scholarly journals Terrestrial laser scanning improves digital elevation models and topsoil pH modelling in regions with complex topography and dense vegetation

2017 ◽  
Vol 95 ◽  
pp. 13-21 ◽  
Author(s):  
Andri Baltensweiler ◽  
Lorenz Walthert ◽  
Christian Ginzler ◽  
Flurin Sutter ◽  
Ross S. Purves ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Digital Elevation Models ◽  
Terrestrial Laser Scanning ◽  
Complex Topography ◽  
Dense Vegetation ◽  
Digital Elevation

scholarly journals Data Gap Classification for Terrestrial Laser Scanning-Derived Digital Elevation Models

2020 ◽  
Vol 9 (12) ◽  
pp. 749
Author(s):  
Matthew S. O’Banion ◽  
Michael J. Olsen ◽  
Jeff P. Hollenbeck ◽  
William C. Wright
Keyword(s):  
Laser Scanning ◽  
Digital Elevation Models ◽  
Relative Proportion ◽  
Terrestrial Laser Scanning ◽  
Habitat Modeling ◽  
Rocky Intertidal ◽  
Intertidal Environment ◽  
Survey Quality ◽  
Digital Elevation ◽  
Data Gap

Extensive gaps in terrestrial laser scanning (TLS) point cloud data can primarily be classified into two categories: occlusions and dropouts. These gaps adversely affect derived products such as 3D surface models and digital elevation models (DEMs), requiring interpolation to produce a spatially continuous surface for many types of analyses. Ultimately, the relative proportion of occlusions in a TLS survey is an indicator of the survey quality. Recognizing that regions of a scanned scene occluded from one scan position are likely visible from another point of view, a prevalence of occlusions can indicate an insufficient number of scans and/or poor scanner placement. Conversely, a prevalence of dropouts is ordinarily not indicative of survey quality, as a scanner operator cannot usually control the presence of specular reflective or absorbent surfaces in a scanned scene. To this end, this manuscript presents a novel methodology to determine data completeness by properly classifying and quantifying the proportion of the site that consists of point returns and the two types of data gaps. Knowledge of the data gap origin can not only facilitate the judgement of TLS survey quality, but it can also identify pooled water when water reflections are the main source of dropouts in a scene, which is important for ecological research, such as habitat modeling. The proposed data gap classification methodology was successfully applied to DEMs for two study sites: (1) A controlled test site established by the authors for the proof of concept of classification of occlusions and dropouts and (2) a rocky intertidal environment (Rabbit Rock) presenting immense challenges to develop a topographic model due to significant tidal fluctuations, pooled water bodies, and rugged terrain generating many occlusions.

scholarly journals An Accuracy Assessment of Derived Digital Elevation Models from Terrestrial Laser Scanning in a Sub-Tropical Forested Environment

2017 ◽  
Vol 9 (8) ◽  
pp. 843 ◽  
Author(s):  
Jasmine Muir ◽  
Nicholas Goodwin ◽  
John Armston ◽  
Stuart Phinn ◽  
Peter Scarth
Keyword(s):  
Laser Scanning ◽  
Accuracy Assessment ◽  
Digital Elevation Models ◽  
Terrestrial Laser Scanning ◽  
Digital Elevation

scholarly journals Geomorphometric analysis of cave ceiling channels mapped with 3D terrestrial laser scanning

2016 ◽  
Author(s):  
Michal Gallay ◽  
Zdenko Hochmuth ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Scalar Fields ◽  
Complex Environments ◽  
Digital Elevation ◽  
Unique Manner ◽  
Elevation Model ◽  
Different Levels

Abstract. The change of hydrological conditions during the evolution of caves in carbonate rocks often results in a complex subterranean geomorphology which comprises specific landforms such as ceiling channels, anastomosing half tubes, or speleothems organised vertically in different levels. Studying such complex environments traditionally requires tedious mapping, however, this is being replaced with terrestrial laser scanning technology. Laser scanning overcomes the problem of reaching high ceilings providing new options to map underground landscapes with unprecedented level of detail and accuracy. The acquired point cloud can be handled conveniently with dedicated software, but applying traditional geomorphometry to analyse the cave surface is limited. This is because geomorphometry has been focused on parameterisation and analysis of surficial terrain. The theoretical and methodological concept has been based on two-dimensional scalar fields which is sufficient for most cases of the surficial terrain. The terrain surface is modelled with a bivariate function of altitude (elevation) and represented by a raster digital elevation model. However, the cave is a three-dimensional entity therefore a different approach is required for geomorphometric analysis. In this paper, we demonstrate the benefits of high resolution cave mapping and 3-D modelling to better understand the palaeohydrography of the Domica cave in Slovakia. This methodological approach adopted traditional geomorphometric methods in a unique manner and also new methods used in 3D computer graphics which can be applied to study other 3-D geomorphological forms

scholarly journals Geomorphometric analysis of cave ceiling channels mapped with 3-D terrestrial laser scanning

2016 ◽  
Vol 20 (5) ◽  
pp. 1827-1849 ◽  
Author(s):  
Michal Gallay ◽  
Zdenko Hochmuth ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Terrestrial Laser Scanning ◽  
Scalar Fields ◽  
Complex Environments ◽  
New Methods ◽  
Digital Elevation ◽  
Unique Manner ◽  
Elevation Model ◽  
Different Levels

Abstract. The change of hydrological conditions during the evolution of caves in carbonate rocks often results in a complex subterranean geomorphology, which comprises specific landforms such as ceiling channels, anastomosing half tubes, or speleothems organized vertically in different levels. Studying such complex environments traditionally requires tedious mapping; however, this is being replaced with terrestrial laser scanning technology. Laser scanning overcomes the problem of reaching high ceilings, providing new options to map underground landscapes with unprecedented level of detail and accuracy. The acquired point cloud can be handled conveniently with dedicated software, but applying traditional geomorphometry to analyse the cave surface is limited. This is because geomorphometry has been focused on parameterization and analysis of surficial terrain. The theoretical and methodological concept has been based on two-dimensional (2-D) scalar fields, which are sufficient for most cases of the surficial terrain. The terrain surface is modelled with a bivariate function of altitude (elevation) and represented by a raster digital elevation model. However, the cave is a 3-D entity; therefore, a different approach is required for geomorphometric analysis. In this paper, we demonstrate the benefits of high-resolution cave mapping and 3-D modelling to better understand the palaeohydrography of the Domica cave in Slovakia. This methodological approach adopted traditional geomorphometric methods in a unique manner and also new methods used in 3-D computer graphics, which can be applied to study other 3-D geomorphological forms.

scholarly journals Terrestrial Laser Scanning for the Detection of Coarse Grain Size Movement in a Mountain Riverbed

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2199 ◽  
Author(s):  
Walicka ◽  
Jóźków ◽  
Kasprzak ◽  
Borkowski
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Horizontal Displacement ◽  
Mountain Stream ◽  
Limited Information ◽  
Fluvial Transport ◽  
Digital Elevation ◽  
Load Transport ◽  
Elevation Model

Fluvial transport is a natural process that shapes riverbeds and the surrounding terrain surface, particularly in mountainous areas. Since the traditional techniques used for fluvial transport investigation provide only limited information about the bed load transport, recently, laser scanning technology has been increasingly incorporated into research to investigate this issue in depth. In this study, a terrestrial laser scanning technique was used to investigate the transport of individual boulders. The measurements were carried out annually from 2011 to 2016 on the Łomniczka River, which is a medium-sized mountain stream. The main goal of this research was to detect and determine displacements of the biggest particles in the mountain riverbed. The methodology was divided into two steps. First, the change zones were detected using two strategies. The first strategy was based on differential digital elevation model (DEM) creation and the second involved the calculation of differences between point clouds instead of DEMs. The experiments show that the second strategy was more efficient. In the second step, the displacements of the boulders were determined based on the detected areas of change. Using the proposed methodology, displacements for individual stones in each year were determined. Most of the changes took place in 2012–2014, which correlates well with the hydrological observations. During the six-year period, movements of individual particles with diameters less than 0.8 m were observed. Maximal displacements in the observed period reached 3 m. Therefore, it is possible to determine both vertical and horizontal displacement in the riverbed using multitemporal TLS.

scholarly journals Investigating the Impact of Digital Elevation Models on Sentinel-1 Backscatter and Coherence Observations

2020 ◽  
Vol 12 (18) ◽  
pp. 3016
Author(s):  
Ignacio Borlaf-Mena ◽  
Maurizio Santoro ◽  
Ludovic Villard ◽  
Ovidiu Badea ◽  
Mihai Andrei Tanase
Keyword(s):  
Remote Sensing ◽  
Laser Scanning ◽  
Digital Elevation Models ◽  
Shuttle Radar Topography Mission ◽  
Synthetic Aperture ◽  
Mountainous Regions ◽  
Aerial Laser Scanning ◽  
Digital Elevation ◽  
The Difference ◽  
The Impact

Spaceborne remote sensing can track ecosystems changes thanks to continuous and systematic coverage at short revisit intervals. Active remote sensing from synthetic aperture radar (SAR) sensors allows day and night imaging as they are not affected by cloud cover and solar illumination and can capture unique information about its targets. However, SAR observations are affected by the coupled effect of viewing geometry and terrain topography. The study aims to assess the impact of global digital elevation models (DEMs) on the normalization of Sentinel-1 backscattered intensity and interferometric coherence. For each DEM, we analyzed the difference between orbit tracks, the difference with results obtained with a high-resolution local DEM, and the impact on land cover classification. Tests were carried out at two sites located in mountainous regions in Romania and Spain using the SRTM (Shuttle Radar Topography Mission, 30 m), AW3D (ALOS (Advanced Land Observation Satellite) World 3D, 30 m), TanDEM-X (12.5, 30, 90 m), and Spain national ALS (aerial laser scanning) based DEM (5 m resolution). The TanDEM-X DEM was the global DEM most suitable for topographic normalization, since it provided the smallest differences between orbital tracks, up to 3.5 dB smaller than with other DEMs for peak landform, and 1.4–1.9 dB for pit and valley landforms.

scholarly journals Fusion of high resolution remote sensing images and terrestrial laser scanning for improved biomass estimation of maize

2014 ◽  
Vol XL-7 ◽  
pp. 101-108 ◽  
Author(s):  
C. Hütt ◽  
H. Schiedung ◽  
N. Tilly ◽  
G. Bareth
Keyword(s):  
High Resolution ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Satellite System ◽  
Biomass Estimation ◽  
Digital Elevation ◽  
Elevation Model ◽  
In The Beginning

In this study, images from the satellite system WorldView-2 in combination with terrestrial laser scanning (TLS) over a maize field in Germany are investigated. Simultaneously to the measurements a biomass field campaigns was carried out. From the point clouds of the terrestrial laser scanning campaigns crop surface models (CSM) from each scanning date were calculate to model plant growth over time. These results were resampled to match the spatial resolution of the WorldView-2 images, which had to orthorectified using a high resolution digital elevation model and atmosphere corrected using the ATCOR Software package. A high direct correlation of the NDVI calculated from the WorldView-2 sensor and the dry biomass was found in the beginning of June. At the same date, the heights from laser scanning can also explain a certain amount of the biomass variation (<i>r</i><sup>2</sup> = 0.6). By combining the NDVI from WorldView-2 and the height from the laser scanner with a linear model, the R2 reaches higher values of 0.86. To further understand the relationship between CSM derived crop heights and reflection indices, a comparison on a pixel basis was performed. Interestingly, the correlation of the NDVI and the crop height is rather low at the beginning of June (<i>r</i><sup>2</sup> = 0,4, <i>n</i> = 1857) and increases significantly (<i>R</i><sup>2</sup> = 0,79, <i>N</i> = 1857) at a later stage.

Sign in / Sign up

Export Citation Format

Share Document