Experimental study on lateral performance of glued-laminated timber frame infilled with cross-laminated timber shear walls

2021 ◽  
Vol 239 ◽  
pp. 112354
Author(s):  
Jianyang Xue ◽  
Guoqi Ren ◽  
Liangjie Qi ◽  
Chenwei Wu ◽  
Zhen Yuan
Keyword(s):  
Experimental Study ◽  
Shear Walls ◽  
Cross Laminated Timber ◽  
Timber Frame ◽  
Glued Laminated Timber ◽  
Timber Shear Walls

scholarly journals Lateral Performance of Cross-laminated Timber Shear Walls: Analytical and Numerical Investigations

2019 ◽  
pp. 213-218
Author(s):  
Md Shahnewaz ◽  
Thomas Tannert ◽  
Marjan Popovski
Keyword(s):  
Parametric Study ◽  
Experimental Validation ◽  
Analytical Procedure ◽  
Shear Walls ◽  
Finite Element Models ◽  
Seismic Loads ◽  
Viable Option ◽  
Cross Laminated Timber ◽  
Type Construction ◽  
Timber Shear Walls

Cross-laminated timber (CLT) is becoming a viable option for mid-rise buildings in North America. CLT walls are very effective in resisting lateral forces resulting from wind and seismic loads, yet no standard provisions are available to estimate the resistance of CLT shear walls under lateral loading. The present research investigated CLT shear wall’s performance by evaluating the preferred kinematic rocking behaviour. An analytical procedure was proposed to estimate the resistance of CLT shear walls in a platform type construction. Finite element models of CLT shear with various brackets and hold-downs connections were developed. The models were validated against experimental results. Furthermore, a parametric study on CLT shear walls with the variation of type and number of connectors was conducted. The resistance estimated from parametric study and against analytical were compared. The proposed formulas can be useful tool for the design of CLT platform-type buildings, however, require further experimental validation.

Deflection of cross-laminated timber shear walls for platform-type construction

2020 ◽  
Vol 221 ◽  
pp. 111091
Author(s):  
Md Shahnewaz ◽  
Marjan Popovski ◽  
Thomas Tannert
Keyword(s):  
Shear Walls ◽  
Cross Laminated Timber ◽  
Type Construction ◽  
Timber Shear Walls

scholarly journals Hyperelastic hold-down for cross-laminated timber shear walls

2020 ◽  
Author(s):  
◽  
Hosein Asgari
Keyword(s):  
Experimental Studies ◽  
Residual Deformation ◽  
Tall Buildings ◽  
Shear Walls ◽  
High Strength ◽  
Cyclic Tests ◽  
Cross Laminated Timber ◽  
High Rise ◽  
Strength And Deformation ◽  
Timber Shear Walls

Cross-laminated Timber (CLT) is increasingly being used in tall buildings. However, there are some challenges when designing high-rise CLT structures, amongst them the need for novel hold-downs (HD), for shear walls. While commonly used HDs behave as a dissipative connection, the current Canadian Standard for Engineering Design in Wood recommends designing HDs as a non-dissipative connection. As hyperelastic material, an elastomer (rubber) is capable to carry high loads without inelastic deformation. This thesis presents experimental studies at material- and component-levels using a hyperelastic rubber HD solution for CLT walls. A total of 53 quasi-static monotonic and cyclic tests were performed. The HDs exhibited high strength and deformation capacity without any residual deformation after unloading. The shape factor and loaded area of rubber layers were found as the main effective factors on the rubber HD’s response, and an empirical load-displacement relation was also developed based on these parameters.

Hysteresis behavior of bracket connection in cross-laminated-timber shear walls

2013 ◽  
Vol 48 ◽  
pp. 980-991 ◽  
Author(s):  
Yin-Lan Shen ◽  
Johannes Schneider ◽  
Solomon Tesfamariam ◽  
Siegfried F. Stiemer ◽  
Zai-Gen Mu
Keyword(s):  
Shear Walls ◽  
Cross Laminated Timber ◽  
Hysteresis Behavior ◽  
Timber Shear Walls

scholarly journals AN EXPERIMENTAL STUDY ON SHEAR LENGTH AND FRACTURE FEATURES OF TENSILE BOLT OF GLUED LAMINATED TIMBER FRAME JOINTS

2017 ◽  
Vol 82 (737) ◽  
pp. 1055-1062 ◽  
Author(s):  
Youichi HAYASAKI ◽  
Yasuhiro ARAKI ◽  
Naohito KAWAI ◽  
Masahiro INAYAMA ◽  
Shiro NAKAJIMA
Keyword(s):  
Experimental Study ◽  
Timber Frame ◽  
Glued Laminated Timber ◽  
Fracture Features

scholarly journals High-capacity hyperelastic hold-down for cross-laminated timber shear walls

2021 ◽  
Author(s):  
◽  
Abubakar Oyawoye
Keyword(s):  
High Capacity ◽  
Design Procedure ◽  
Shear Walls ◽  
Mode Iii ◽  
Component Level ◽  
Cross Laminated Timber ◽  
Ductile Mode ◽  
Hyper Elastic ◽  
Timber Shear Walls ◽  
Modelling And Optimization

Cross-laminated timber (CLT) continues to establish a stronger footing in the Canadian construction industry, also as an option for lateral load resisting systems, such as shear walls. Recent modifications to the Canadian Standard for Engineering Design in Wood (CSA O86- 19) allow only rocking kinematics as energy dissipative mechanics for CLT shear walls, whereby hold-down must remain elastic. These provisions necessitate the development of novel hold-down solutions. In this report, the performance of a hyper-elastic high-capacity hold-down was investigated at the component level through tests on: (1) hold-down steel rod, (2) CLT housing, and (3) hold-down assemblies with different sizes of rubber pads. The tests demonstrated that: i) the rubber hold-down can remain elastic under a rocking kinematics provided that the elastic limit of the steel rod is not exceeded; ii) failure of the rod is the subsequent desired ductile mode; iii) the CLT width influences the failure mode; iv) the shape factor influences the achievable deformation of the rubber pad; v) increasing the rubber pad thickness reduces the hold-down stiffness; and vi) increasing the rubber pad width increases the hold-down stiffness. Numerical modelling and optimization suggested that using an intermediate steel laminate between layers of rubber pads could improve its performance. Based on the results of the investigations presented herein, a capacity-design procedure for the hyper-elastic hold-downs was proposed.

Sign in / Sign up

Export Citation Format

Share Document