Investigation of potential damage to bridge infrastructure from induced earthquakes

2021 ◽  
Vol 238 ◽  
pp. 112252
Author(s):  
Farid Khosravikia ◽  
Patricia Clayton ◽  
Eric Williamson
1976 ◽  
Vol 19 (2) ◽  
pp. 216-224 ◽  
Author(s):  
James T. Yates ◽  
Jerry D. Ramsey ◽  
Jay W. Holland

The purpose of this study was to compare the damage risk of 85 and 90 dBA of white noise for equivalent full-day exposures. The damage risk of the two noise levels was determined by comparing the temporary threshold shift (TTS) of 12 subjects exposed to either 85 or 90 dBA of white noise for equivalent half- and full-day exposures. TTS was determined by comparing the pre- and postexposure binaural audiograms of each subject at 1, 2, 3, 4, 6, and 8 kHz. It was concluded that the potential damage risk, that is, hazardous effect, of 90 dBA is greater than 85 dBA of noise for equivalent full-day exposures. The statistical difference between the overall effects of equivalent exposures to 85 dBA as compared to 90 dBA of noise could not be traced to any one frequency. The damage risk of a full-day exposure to 85 dBA is equivalent to that of a half-day exposure to 90 dBA of noise. Within the limits of this study, TTS t was as effective as TTS 2 for estimating the damage risk of noise exposure.


Author(s):  
K. N. Hooghan ◽  
K. S. Wills ◽  
P.A. Rodriguez ◽  
S.J. O’Connell

Abstract Device repair using Focused Ion Beam(FIB) systems has been in use for most of the last decade. Most of this has been done by people who have been essentially self-taught. The result has been a long learning curve to become proficient in device repair. Since a great deal of the problem is that documentation on this “art form” is found in papers from many different disciplines, this work attempts to summarize all of the available information under one title. The primary focus of FIB device repair is to ensure and maintain device integrity and subsequently retain market share while optimizing the use of the instrument, usually referred to as ‘beam time’. We describe and discuss several methods of optimizing beam time. First, beam time should be minimized while doing on chip navigation to reach the target areas. Several different approaches are discussed: dead reckoning, 3-point alignment, CAD-based navigation, and optical overlay. Second, after the repair areas are located and identified, the desired metal levels must be reached using a combination of beam currents and gas chemistries, and then filled up and strapped to make final connections. Third, cuts and cleanups must be performed as required for the final repair. We will discuss typical values of the beam currents required to maintain device integrity while concurrently optimizing repair time. Maintaining device integrity is difficult because of two potentially serious interactions of the FIB on the substrate: 1) since the beam consists of heavy metal ions (typically Gallium) the act of imaging the surface produces some physical damage; 2) the beam is positively charged and puts some charge into the substrate, making it necessary to use great care working in and around capacitors or active areas such as transistors, in order to avoid changing the threshold voltage of the devices. Strategies for minimizing potential damage and maximizing quality and throughput will be discussed.


1994 ◽  
Vol 65 (2) ◽  
pp. 167-171 ◽  
Author(s):  
L.T. Long ◽  
A. Kocaoglu ◽  
R. Hawman ◽  
P.J.W. Gore

Abstract During the summer of 1993, the residents in the Norris Lake community, Lithonia, Georgia, were bothered by an incessant swarm of earthquakes. The largest, a magnitude 2.7 on September 23, showed a normal aftershock decay and occurred after the main swarm. Over 10,000 earthquakes have been detected, of which perhaps 500 were felt. The earthquakes began June 8, 1993, with a 5-day swarm. The residents, accustomed to quarry explosions, suspected the quarries of irregular activities. To locate the source of the events, a visual recorder and a digital event recorder were placed in the epicentral area. Ten to 20 events were detected per day for the next three weeks. The swarm then escalated to a peak of over 100 per day by August 15, 1993. Activity following the peak died down to about 10 events per day. The magnitude 2.7 event of September 23 was followed by a normal aftershock sequence. The larger events were felt with intensity V within 2 km of their epicenter, and noticed (intensity II) to a distance of 15 km. Some incidents of cracked wallboard and foundations have been reported, but no significant damage has been documented. Preliminary locations, based on data from digital event recorders, suggest an average depth of 1.0 km. The hypocenters are in the Lithonia gneiss, a massive migmatite resistant to weathering and used locally as a building stone. The epicenters are 1 to 2 km south-southwest of the Norris Lake Community. The cause of the seismicity is not yet known. The earthquakes are characteristic of reservoir-induced earthquakes; however, Norris Lake is a small (96 acres), 2 to 5m deep recreational lake which has existed since the 1950s.


2021 ◽  
Vol 13 (5) ◽  
pp. 2750
Author(s):  
Veronika Piscová ◽  
Michal Ševčík ◽  
Juraj Hreško ◽  
František Petrovič

Over the past decades, outdoor recreation in mountains has become progressively more important and as a result human induced potential damage has increased. Alpine communities are particularly susceptible to human recreational activities, such as tourist trampling. Although there are a number of studies that explicitly assess the effects of trampling on alpine communities, they do not reflect on terrains with a rich topography and the presence of more communities in very small areas. In this study, effects of short-term trampling on some alpine communities in the Tatras, the highest mountains of the Carpathians, were studied experimentally. Vulnerability to disturbance was compared among plant communities in terms of resistance and resilience, which are based on cover measurements. With proximity to trampling intensity, we found a significant decrease in plant cover and abundance of deciduous shrubs, lichens, and mosses. These results demonstrate that human trampling in alpine communities has major negative impacts on lichen and moss abundance and species richness. A short-term trampling experiment required several years of community regeneration. Therefore, management plans should discourage hiking activity off paths and restrict recreational activities.


Author(s):  
Serge A. Shapiro ◽  
Carsten Dinske

AbstractSometimes, a rather high stress drop characterizes earthquakes induced by underground fluid injections or productions. In addition, long-term fluid operations in the underground can influence a seismogenic reaction of the rock per unit volume of the fluid involved. The seismogenic index is a quantitative characteristic of such a reaction. We derive a relationship between the seismogenic index and stress drop. This relationship shows that the seismogenic index increases with the average stress drop of induced seismicity. Further, we formulate a simple and rather general phenomenological model of stress drop of induced earthquakes. This model shows that both a decrease of fault cohesion during the earthquake rupture process and an enhanced level of effective stresses could lead to high stress drop. Using these two formulations, we propose the following mechanism of increasing induced seismicity rates observed, e.g., by long-term gas production at Groningen. Pore pressure depletion can lead to a systematic increase of the average stress drop (and thus, of magnitudes) due to gradually destabilizing cohesive faults and due to a general increase of effective stresses. Consequently, elevated average stress drop increases seismogenic index. This can lead to seismic risk increasing with the operation time of an underground reservoir.


2021 ◽  
Vol 234 ◽  
pp. 111904
Author(s):  
Andréia H.A. da Silva ◽  
Eduardo M.V. Pereira ◽  
Gonzalo L. Pita ◽  
Gustavo H. Siqueira ◽  
Luiz C.M. Vieira Jr.

Sign in / Sign up

Export Citation Format

Share Document