Essential state-of-stress features of HBBC connections revealed by modeling simulative strain energy

2021 ◽  
Vol 230 ◽  
pp. 111463
Author(s):  
Zhiheng Chen ◽  
Yan Zhao ◽  
Yongsong Shao ◽  
Guangchun Zhou
Keyword(s):  
Strain Energy ◽  
State Of Stress ◽  
Essential State

Nonlinear Through-Thickness Behavior of a Toroidal Shell Using 2-D Finite Elements

2001 ◽  
Author(s):  
James M. Greer ◽  
Anthony N. Palazotto
Keyword(s):  
Finite Elements ◽  
Transverse Shear ◽  
Strain Energy ◽  
Shell Thickness ◽  
Three Dimensional ◽  
Toroidal Shell ◽  
Two Dimensional ◽  
Qualitative And Quantitative ◽  
Pipe Elbow ◽  
State Of Stress

Abstract The use of two-dimensional shell finite elements is explored for finding the three-dimensional state of stress in a toroidal shell. The torus under study represents a 90-degree pipe elbow with a pressure load on a portion of its surface. Layer-wise polynomials are used to represent the transverse shear and normal stretch deformations in the shell. These functions are chosen such that displacements and stresses (but not strains) are continuous at the ply interfaces. Both isotropic and composite (cross-ply) versions of the shell are investigated, and the thicknesses of each are varied to see the effect on through-thickness behavior. Significant qualitative and quantitative differences in these behaviors are observed, particularly in the important direct through-thickness (peeling) stress. The contribution of the transverse deformations to strain energy is investigated and, in most of the shells studied, the thickness stretch component is found to be a greater contributor to strain energy than the transverse shear, though the transverse shear contribution is seen to vary more dramatically with changes in shell thickness.

scholarly journals Inhomogeneous Cartilage Properties Enhance Superficial Interstitial Fluid Support and Frictional Properties, But Do Not Provide a Homogeneous State of Stress

2003 ◽  
Vol 125 (5) ◽  
pp. 569-577 ◽  
Author(s):  
Ramaswamy Krishnan ◽  
Seonghun Park ◽  
Felix Eckstein ◽  
Gerard A. Ateshian
Keyword(s):  
Finite Element ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Interstitial Fluid ◽  
Elastic Stress ◽  
Articular Surface ◽  
Homogeneous State ◽  
Wear Properties ◽  
State Of Stress ◽  
Fluid Load

It has been well established that articular cartilage is compositionally and mechanically inhomogeneous through its depth. To what extent this structural inhomogeneity is a prerequisite for appropriate cartilage function and integrity is not well understood. The first hypothesis to be tested in this study was that the depth-dependent inhomogeneity of the cartilage acts to maximize the interstitial fluid load support at the articular surface, to provide efficient frictional and wear properties. The second hypothesis was that the inhomogeneity produces a more homogeneous state of elastic stress in the matrix than would be achieved with uniform properties. We have, for the first time, simultaneously determined depth-dependent tensile and compressive properties of human patellofemoral cartilage from unconfined compression stress relaxation tests. The results show that the tensile modulus increases significantly from 4.1±1.9MPa in the deep zone to 8.3±3.7MPa at the superficial zone, while the compressive modulus decreases from 0.73±0.26MPa to 0.28±0.16MPa. The experimental measurements were then implemented with the finite-element method to compute the response of an inhomogeneous and homogeneous cartilage layer to loading. The finite-element models demonstrate that structural inhomogeneity acts to increase the interstitial fluid load support at the articular surface. However, the state of stress, strain, or strain energy density in the solid matrix remained inhomogeneous through the depth of the articular layer, whether or not inhomogeneous material properties were employed. We suggest that increased fluid load support at the articular surface enhances the frictional and wear properties of articular cartilage, but that the tissue is not functionally adapted to produce homogeneous stress, strain, or strain energy density distributions. Interstitial fluid pressurization, but not a homogeneous elastic stress distribution, appears thus to be a prerequisite for the functional and morphological integrity of the cartilage.

The wustite-spinel interface

1987 ◽  
Vol 45 ◽  
pp. 268-269
Author(s):  
S.R. Summerfelt ◽  
C.B. Carter
Keyword(s):  
Solid State ◽  
Solid State Reaction ◽  
Strain Energy ◽  
Matrix Material ◽  
Lattice Misfit ◽  
Solid State Reactions ◽  
Oxygen Sublattice ◽  
Large Particles ◽  
Small Lattice ◽  
Coherent Interfaces

The wustite-spinel interface can be viewed as a model interface because the wustite and spinel can share a common f.c.c. oxygen sublattice such that only the cations distribution changes on crossing the interface. In this study, the interface has been formed by a solid state reaction involving either external or internal oxidation. In systems with very small lattice misfit, very large particles (>lμm) with coherent interfaces have been observed. Previously, the wustite-spinel interface had been observed to facet on {111} planes for MgFe2C4 and along {100} planes for MgAl2C4 and MgCr2O4, the spinel then grows preferentially in the <001> direction. Reasons for these experimental observations have been discussed by Henriksen and Kingery by considering the strain energy. The point-defect chemistry of such solid state reactions has been examined by Schmalzried. Although MgO has been the principal matrix material examined, others such as NiO have also been studied.

Modeling of Strain Energy Harvesting in Pneumatic Tires Using Piezoelectric Transducer

2014 ◽  
Vol 42 (1) ◽  
pp. 16-34 ◽  
Author(s):  
Ali E. Kubba ◽  
Mohammad Behroozi ◽  
Oluremi A. Olatunbosun ◽  
Carl Anthony ◽  
Kyle Jiang
Keyword(s):  
Energy Harvesting ◽  
Strain Energy ◽  
Fiber Composite ◽  
Experimental Tests ◽  
Evaluation Study ◽  
Monitoring Systems ◽  
Monitoring Device ◽  
Optimum Location ◽  
Piezoelectric Fiber Composite ◽  
Piezoelectric Fiber

ABSTRACT This paper presents an evaluation study of the feasibility of harvesting energy from rolling tire deformation and using it to supply a tire monitoring device installed within the tire cavity. The developed technique is simulated by using a flexible piezoelectric fiber composite transducer (PFC) adhered onto the tire inner liner acting as the energy harvesting element for tire monitoring systems. The PFC element generates electric charge when strain is applied to it. Tire cyclic deformation, particularly at the contact patch surface due to rolling conditions, can be exploited to harvest energy. Finite element simulations, using Abaqus package, were employed to estimate the available strain energy within the tire structure in order to select the optimum location for the PFC element. Experimental tests were carried out by using an evaluation kit for the energy harvesting element installed within the tire cavity to examine the PFC performance under controlled speed and loading conditions.

Stress Analysis of a Tire Under Vertical Load by a Finite Element Method

1977 ◽  
Vol 5 (2) ◽  
pp. 102-118 ◽  
Author(s):  
H. Kaga ◽  
K. Okamoto ◽  
Y. Tozawa
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Program ◽  
Temperature Rise ◽  
Strain Energy ◽  
Internal Stresses ◽  
Vertical Load ◽  
The Finite Element Method ◽  
Internal Temperature ◽  
Element Method

Abstract An analysis by the finite element method and a related computer program is presented for an axisymmetric solid under asymmetric loads. Calculations are carried out on displacements and internal stresses and strains of a radial tire loaded on a road wheel of 600-mm diameter, a road wheel of 1707-mm diameter, and a flat plate. Agreement between calculated and experimental displacements and cord forces is quite satisfactory. The principal shear strain concentrates at the belt edge, and the strain energy increases with decreasing drum diameter. Tire temperature measurements show that the strain energy in the tire is closely related to the internal temperature rise.

Sensitivity analysis of sandwich beams and plates accounting for variable support conditions

2013 ◽  
Vol 61 (1) ◽  
pp. 201-210 ◽  
Author(s):  
R. Studziński ◽  
Z. Pozorski ◽  
A. Garstecki
Keyword(s):  
Sensitivity Analysis ◽  
Adjoint Variable Method ◽  
Adjoint Variable ◽  
Practical Applications ◽  
The Core ◽  
State Of Stress ◽  
Thin Steel ◽  
Influence Of Temperature On ◽  
Support Conditions ◽  
Variable Support

Abstract The paper addresses the problems of the sensitivity analysis and optimal design of multi-span sandwich panels with a soft core and flat thin steel facings. The response functional is formulated in a general form allowing wide practical applications. Sensitivity gradients of this functional with respect to dimensional, material and support parameters are derived using adjoint variable method. These operators account for the jump of the slope of a Timoshenko beam or a Reissner plate at the position of concentrated active load or reaction, thus extending the sensitivity operators known in literature. The jump of slope is the effect of shear deformation of the core. Special attention is focussed on sensitivity and optimisation allowing for variable support position and stiffness, because local phenomena observed in supporting area of sandwich plates often initiate failure mechanisms. Introducing optimally located elastic supports allows to reduce the unfavourable influence of temperature on the state of stress. Several examples illustrate the application of derived sensitivity operators and demonstrate their exactness

The Influence of Loads Superposition, Deterioration Due to Cracks and Residual Stresses on the Strength of Tubular Junction

2017 ◽  
Vol 68 (6) ◽  
pp. 1267-1273
Author(s):  
Valeriu V. Jinescu ◽  
Angela Chelu ◽  
Gheorghe Zecheru ◽  
Alexandru Pupazescu ◽  
Teodor Sima ◽  
...  
Keyword(s):  
Stress Concentration ◽  
Residual Stresses ◽  
Bending Moment ◽  
Combined Loading ◽  
Torsional Moment ◽  
Calculation Methods ◽  
State Of Stress ◽  
Cracked Structures ◽  
Total Participation ◽  
Theoretical Results

In the paper the interaction of several loads like pressure, axial force, bending moment and torsional moment are analyzed, taking into account the deterioration due to cracks and the influence of residual stresses. A nonlinear, power law, of structure material is considered. General relationships for total participation of specific energies introduced in the structure by the loads, as well as for the critical participation have been proposed. On these bases: - a new strength calculation methods was developed; � strength of tubular cracked structures and of cracked tubular junction subjected to combined loading and strength were analyzed. Relationships for critical state have been proposed, based on dimensionless variables. These theoretical results fit with experimental date reported in literature. On the other side stress concentration coefficients were defined. Our one experiments onto a model of a pipe with two opposite nozzles have been achieved. Near one of the nozzles is a crack on the run pipe. Trough the experiments the state of stress have been obtained near the tubular junction, near the tip of the crack and far from the stress concentration points. On this basis the stress concentration coefficients were calculated.

State of Stress in the Near-Contact Region of a Semiconductor during Metallization Track Electrodegradation

2020 ◽  
Vol 2020 (13) ◽  
pp. 1658-1662
Author(s):  
A. A. Skvortsov ◽  
S. M. Zuev ◽  
M. V. Koryachko ◽  
E. B. Voloshinov
Keyword(s):  
Contact Region ◽  
State Of Stress
Sign in / Sign up

Export Citation Format

Share Document