Composite behaviour of fibre-reinforced concrete sandwich panels with FRP shear connectors

2019 ◽  
Vol 198 ◽  
pp. 109475 ◽  
Author(s):  
Richard O′Hegarty ◽  
Roger West ◽  
Aidan Reilly ◽  
Oliver Kinnane
Keyword(s):  
Reinforced Concrete ◽  
Sandwich Panels ◽  
Fibre Reinforced Concrete ◽  
Shear Connectors

scholarly journals Structural behaviour of ultra high performance fibre reinforced concrete composite members

2021 ◽  
Author(s):  
Luaay Hussein
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
High Performance ◽  
Composite Beams ◽  
Shear Capacity ◽  
Fibre Reinforced Concrete ◽  
Test Results ◽  
Structural Behaviour ◽  
Shear Connectors ◽  
High Performance Fibre

The aging and deterioration of reinforced concrete infrastructures in North America present major technical and economical challenges to infrastructure owners. To effectively address some of the challenges, there is a need to develop innovative and cost-effective systems. The main objective of this research was to develop composite members of ultra-high performance fibre reinforced concrete and normal strength concrete or high strength concrete (UHPFRC-NSC/HSC). In order to achieve this objective, the first phase of this research investigates the structural behaviour of UHPFRC with varying fibre content beams without web reinforcement. Test results indicated that the addition of 1% of steel fibres effectively improves the shear strength of UHPC beams by 77% due to the crack-bridging stress that develops across the crack surface. In the second phase, experimental studies were carried out on UHPFRC-NSC/HSC prisms and beams without stirrups to investigate the flexural and shear capacity of those composite members. Each beam specimen was designed to have the UHPFRC layer in tension and the NSC/HSC layer in compression. Additional varied parameters included fibre volume content, and shear connectors were investigated. Test results showed that the performance of the proposed composite system in terms of the flexural and shear capacity was successfully enhanced. All composite beams failed in shear at a force that is 1.6 to 2.0 times higher than that of the NSC/HSC beam's resistance. Test results showed that the effect of using HSC versus NSC in the composite beam was negligible, and the bond strength between the two concrete material layers (UHPFRC and NSC/HSC) was significantly high that the addition of shear connectors was unnecessary. In the third phase, an analytical and finite element models to predict the ultimate shear capacity of UHPFRC composite beams were proposed and validated with the experimental results. The results of the finite element analysis showed that the size effect in structures made of UHPFRC material has little influence on the shear capacity. Finally a comparison between the finite element model and the analytical model indicated that both models developed in this research are capable of predicting the shear behaviour of UHPFRC and UHPFRC-NSC/HSC beams.

Experimental investigation of fibre-reinforced concrete deck slabs without internal steel reinforcement

1993 ◽  
Vol 20 (3) ◽  
pp. 398-406 ◽  
Author(s):  
Aftab A. Mufti ◽  
Leslie G. Jaeger ◽  
Baidar Bakht ◽  
Leon D. Wegner
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Steel Reinforcement ◽  
Punching Shear ◽  
Fibre Reinforced Concrete ◽  
Reinforced Concrete Slab ◽  
Shear Connectors ◽  
Deck Slabs ◽  
Concrete Deck ◽  
Deck Slab

It is now well established that concrete deck slabs of slab-on-girder bridges subjected to concentrated loads develop an internal arching system provided that certain conditions of confinement of the concrete are met. Because of this arching system, the deck slab, being predominantly in compression, fails in punching shear rather than in flexure. This aspect of deck slab behaviour, coupled with the corrosion problems associated with steel reinforcement in concrete, has prompted the authors to investigate the feasibility of fibre-reinforced concrete decks that are entirely devoid of steel. Through tests on a small number of half-scale models, it has been established that fibre-reinforced concrete slab with inexpensive non-ferrous fibres is indeed feasible, provided that the top flanges of the steel girders are connected just below the deck by transverse steel straps and the concrete deck is joined to the girders and diaphragms by shear connectors. The straps and shear connectors together provide the restraint necessary for development of the internal arching system in the slab, whilst the fibres control cracking due to the effects of shrinkage and temperature in the concrete. This paper describes the exploratory model tests and presents their results. Key words: deck slab, fibre-reinforced concrete, internal arching, punching shear, slab-on-girder bridge.

scholarly journals Structural behaviour of ultra high performance fibre reinforced concrete composite members

2021 ◽  
Author(s):  
Luaay Hussein
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
High Performance ◽  
Composite Beams ◽  
Shear Capacity ◽  
Fibre Reinforced Concrete ◽  
Test Results ◽  
Structural Behaviour ◽  
Shear Connectors ◽  
High Performance Fibre

The aging and deterioration of reinforced concrete infrastructures in North America present major technical and economical challenges to infrastructure owners. To effectively address some of the challenges, there is a need to develop innovative and cost-effective systems. The main objective of this research was to develop composite members of ultra-high performance fibre reinforced concrete and normal strength concrete or high strength concrete (UHPFRC-NSC/HSC). In order to achieve this objective, the first phase of this research investigates the structural behaviour of UHPFRC with varying fibre content beams without web reinforcement. Test results indicated that the addition of 1% of steel fibres effectively improves the shear strength of UHPC beams by 77% due to the crack-bridging stress that develops across the crack surface. In the second phase, experimental studies were carried out on UHPFRC-NSC/HSC prisms and beams without stirrups to investigate the flexural and shear capacity of those composite members. Each beam specimen was designed to have the UHPFRC layer in tension and the NSC/HSC layer in compression. Additional varied parameters included fibre volume content, and shear connectors were investigated. Test results showed that the performance of the proposed composite system in terms of the flexural and shear capacity was successfully enhanced. All composite beams failed in shear at a force that is 1.6 to 2.0 times higher than that of the NSC/HSC beam's resistance. Test results showed that the effect of using HSC versus NSC in the composite beam was negligible, and the bond strength between the two concrete material layers (UHPFRC and NSC/HSC) was significantly high that the addition of shear connectors was unnecessary. In the third phase, an analytical and finite element models to predict the ultimate shear capacity of UHPFRC composite beams were proposed and validated with the experimental results. The results of the finite element analysis showed that the size effect in structures made of UHPFRC material has little influence on the shear capacity. Finally a comparison between the finite element model and the analytical model indicated that both models developed in this research are capable of predicting the shear behaviour of UHPFRC and UHPFRC-NSC/HSC beams.

Adding an expansive agent to increase the toughness of steel fibre reinforced concrete

2019 ◽  
Vol 26 (4) ◽  
pp. 197-208
Author(s):  
Leo Gu Li ◽  
Albert Kwok Hung Kwan
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
The Other ◽  
Fibre Reinforced Concrete ◽  
Test Results ◽  
Compressive Properties ◽  
Shrinkage Cracking ◽  
Steel Fibre Reinforced Concrete ◽  
Expansive Agent ◽  
Concrete Matrix

Previous research studies have indicated that using fibres to improve crack resistance and applying expansive agent (EA) to compensate shrinkage are both effective methods to mitigate shrinkage cracking of concrete, and the additions of both fibres and EA can enhance the other performance attributes of concrete. In this study, an EA was added to fibre reinforced concrete (FRC) to produce concrete mixes with various water/binder (W/B) ratios, steel fibre (SF) contents and EA contents for testing of their workability and compressive properties. The test results showed that adding EA would slightly increase the superplasticiser (SP) demand and decrease the compressive strength, Young’s modulus and Poisson’s ratio, but significantly improve the toughness and specific toughness of the steel FRC produced. Such improvement in toughness may be attributed to the pre-stress of the concrete matrix and the confinement effect of the SFs due to the expansion of the concrete and the restraint of the SFs against such expansion.

Structural performance of steel fibre reinforced concrete — Part IV. Toughness properties

2014 ◽  
Vol 5 (2) ◽  
pp. 119-125
Author(s):  
I. Kovács
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
Fibre Orientation ◽  
Reinforced Concrete Beams ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Flexural Toughness ◽  
Steel Fibre Reinforced Concrete ◽  
Set Up ◽  
Flexural Tests

The present paper of a series deals with the experimental characterisation of flexural toughness properties of structural concrete containing different volume of hooked-end steel fibre reinforcement (75 kg/m3, 150 kg/m3). Third-point flexural tests were carried out on steel fibre reinforced concrete beams having a cross-section of 80 mm × 85 mm with the span of 765 mm, hence the shear span to depth ratio was 3. Beams were sawn out of steel fibre reinforced slab elements (see Part I) in order to take into consideration the introduced privilege fibre orientation (I and II) and the position of the beam (Ba-a, Ba-b, Ba-c) before sawing (see Part I). Flexural toughness properties were determined considering different standard specifications, namely the method of the ASTM (American Standards for Testing Materials), the process of the JSCE (Japan Society of Civil Engineering), and the final proposal of Banthia and Trottier for the post cracking strength. Consequently, behaviour of steel fibre reinforced concrete was examined in bending taking into consideration different experimental parameters such as fibre content, concrete mix proportions, fibre orientation, positions of test specimens in the formwork, while experimental constants were the size of specimens, the type of fibre used and the test set-up and test arrangement.

Sign in / Sign up

Export Citation Format

Share Document