Defective two adjacent single degree of freedom systems linked by spring-dashpot-inerter for vibration control

2019 ◽  
Vol 188 ◽  
pp. 480-492 ◽  
Author(s):  
Michela Basili ◽  
Maurizio De Angelis ◽  
Daniele Pietrosanti
Keyword(s):  
Vibration Control ◽  
Degree Of Freedom ◽  
Single Degree Of Freedom ◽  
Single Degree

The Active Control of Forced Vibration Produced by Arbitrary Disturbances

1985 ◽  
Vol 107 (1) ◽  
pp. 33-37 ◽  
Author(s):  
J. S. Burdess ◽  
A. V. Metcalfe
Keyword(s):  
Vibration Control ◽  
Active Control ◽  
Forced Vibration ◽  
Disturbance Observer ◽  
Degree Of Freedom ◽  
Experimental Results ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Impact Forces ◽  
Mass Spring

This paper considers the vibration control of a single degree of freedom mass-spring-damper system when subjected to an arbitrary, unmeasurable disturbance. The idea of a disturbance observer is introduced and it is shown how an estimate of the excitation can be derived and used to generate a control, which reduces the vibration. This control is shown to be robust with respect to the parameters describing the behavior of the system. Experimental results are presented which show the efficacy of the method when the system is excited by periodic, random, and impact forces. Comments are made on the application of the method.

Optimum Design of a New Tuned Inerter Mass Damper (TIMD) Passive Vibration Control for Stochastically Motion-Excited Structures

2019 ◽  
Author(s):  
Wei-Che Tai
Keyword(s):  
Vibration Control ◽  
Damping Ratio ◽  
Degree Of Freedom ◽  
Rotational Inertia ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Tuning Ratio ◽  
Mass Damper ◽  
Two Degree Of Freedom ◽  
H2 Optimization

Abstract The inerter that is referred to as a two-terminal device that provides resisting forces proportional to the relative accelerations between its two terminals has been widely applied in vibration control due to its mass amplification effect. In this paper, a new inerter-based damper is proposed to take advantage of the inerter, which consists of a rack-pinion inerter in conjunction with a tuned rotational inertia damper. Unlike any other inerter-based dampers, the rotational inertia damper is connected to the pinion of the inerter via a rotational spring and damper. As a result, the weight of the damper can be significantly reduced. The proposed damper is applied to single-degree-of-freedom primary structures and a two-degree-of-freedom structure and the H2 optimization is conducted to obtain the optimum tuning ratio and damping ratio analytically. When comparing the proposed damper with its counterpart reported in the literature, the proposed damper achieves 20% to 70% improvement when their weights are identical.

Sign in / Sign up

Export Citation Format

Share Document