Parametric study of an integral abutment bridge supported by prestressed precast concrete piles

2016 ◽  
Vol 120 ◽  
pp. 37-48 ◽  
Author(s):  
B. Kong ◽  
C.S. Cai ◽  
Y. Zhang
Keyword(s):  
Parametric Study ◽  
Precast Concrete ◽  
Integral Abutment ◽  
Concrete Piles ◽  
Integral Abutment Bridge

Computer Modeling and Parametric Study of Thermal Effects in Integral Abutment Bridge

2012 ◽  
Vol 446-449 ◽  
pp. 733-738
Author(s):  
Mohammed Awad ◽  
Tian Lai Yu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Axial Force ◽  
Temperature Rise ◽  
Parametric Study ◽  
Element Model ◽  
Structural Behavior ◽  
Integral Abutment ◽  
Thermally Induced ◽  
Integral Abutment Bridge

Structural behavior of concrete integral abutment bridge subjected to temperature rise was investigated through a numerical modeling and parametric study. Long-term, field monitoring through the summer was performed on Industrial Park Bridge located in Heilongjiang province, China from June 13, 2010 until June 28, 2010. The collected data was used to validate the accuracy of a 3D-finite element model of the bridge which took into account soil-structure interaction. Based on the calibrated finite element model a parametric study considered two parameters, bridge length and abutment height, was carried out to investigate the effects of this parameters on structural behavior of integral abutment bridge subject to temperature rise. It was determined that Thermal load in the superstructure of the integral bridge develop significant magnitudes of bending and axial forces in the superstructure. The largest magnitude of thermally induced moment always occurs near the abutment, and axial force is constant across the length of each span. For bridge thermal expansion, longer bridges and taller abutments cause larger thermally induced superstructure axial force due to development of higher backfill pressure. Generally span length has a higher influence for thermally induced superstructure forces in terms of axial force and bending moment than the abutment height.

Semi Static Loads in an Integral Abutment Bridge

2016 ◽  
Vol 106 (13) ◽  
pp. 61-69
Author(s):  
Miguel MUNOZ ◽  
Junqing XUE ◽  
Bruno BRISEGHELLA ◽  
Camillo NUTI
Keyword(s):  
Integral Abutment ◽  
Static Loads ◽  
Integral Abutment Bridge

Behaviour of H-piles supporting an integral abutment bridge

2014 ◽  
Vol 51 (7) ◽  
pp. 713-734 ◽  
Author(s):  
Shelley A. Huntley ◽  
Arun J. Valsangkar
Keyword(s):  
Axial Load ◽  
Integral Abutment ◽  
Integral Abutment Bridges ◽  
Expansion Joints ◽  
Thermal Bridge ◽  
Double Curvature ◽  
Abutment Bridges ◽  
Integral Abutments ◽  
Integral Abutment Bridge ◽  
Lateral Displacements

Integral abutment bridges accommodate thermal superstructure movements through flexible foundations rather than expansion joints. While these structures are a common alternative to conventional design, the literature on measured field stresses in piles supporting integral abutments appears to be quite limited. Therefore, field data from strain gauges installed on the abutment foundation piles of a 76 m long; two-span integral abutment bridge are the focus of this paper. Axial load, weak- and strong-axis bending moments of the foundation piles, as well as abutment movement and backfill response, are presented and discussed. Results indicate that the abutment foundation piles are bending in double curvature about the weak axis, as a result of thermal bridge movements, and bending also about the strong axis due to tilting of the abutments. A simple subgrade modulus approach is used to show its applicability in predicting behaviour under lateral loading. In the past, much emphasis has been placed on the lateral displacements of piles and less on variations of axial load. In this paper, a new hypothesis, which offers insight into the mechanisms behind the observed thermal variations in axial load, is proposed and assessed. The data from the field monitoring are also compared with the limited data reported in the literature.

scholarly journals Limitations of the Danish driving formula for short piles

2021 ◽  
Vol 44 (2) ◽  
pp. 1-6
Author(s):  
Silvio Heleno de Abreu Vieira ◽  
Francisco R. Lopes
Keyword(s):  
Load Capacity ◽  
Precast Concrete ◽  
Free Fall ◽  
Technical Note ◽  
Driven Piles ◽  
Concrete Piles ◽  
Load Tests ◽  
Semi Empirical ◽  
The City ◽  
Pile Length

Dynamic formulae are a widely used expedient for the control of driven piles to ensure load capacity. These formulae have considerable limitations when used in the prediction of the load capacity on their own, but are very useful in the control of a piling when combined with other tests. This technical note presents an evaluation of the Danish Formula for 54 precast concrete piles, comparing its results with High Strain Dynamic Tests (HSDTs), Static Load Tests (SLTs) and predictions by a semi-empirical static method (Aoki & Velloso, 1975). The data used in the comparison come from three works in the city of Rio de Janeiro, Brazil. All piles were driven with free-fall hammers and in one particular work the piles were relatively short. The predictions of the Danish Formula were evaluated in relation to the pile length/diameter ratio. It was concluded that for short piles - with lengths less than 30 times the diameter - this formula indicates bearing capacities higher than the actual ones. A correction for a safe use of the Danish Formula for short piles is suggested.

Sign in / Sign up

Export Citation Format

Share Document