Analysis on the effect of polysulfide electrolyte composition for higher performance of Si quantum dot-sensitized solar cells

2013 ◽  
Vol 95 ◽  
pp. 43-47 ◽  
Author(s):  
Hyunwoong Seo ◽  
Yuting Wang ◽  
Giichiro Uchida ◽  
Kunihiro Kamataki ◽  
Naho Itagaki ◽  
...  
2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
H. K. Jun ◽  
M. A. Careem ◽  
A. K. Arof

A polysulfide liquid electrolyte is developed for the application in CdSe quantum dot-sensitized solar cells (QDSSCs). A solvent consisting of ethanol and water in the ratio of 8 : 2 by volume has been found as the optimum solvent for preparing the liquid electrolytes. This solvent ratio appears to give higher cell efficiency compared to pure ethanol or water as a solvent. Na2S and S give rise to a good redox couple in the electrolyte for QDSSC operation, and the optimum concentrations required are 0.5 M and 0.1 M, respectively. Addition of guanidine thiocyanate (GuSCN) to the electrolyte further enhances the performance. The QDSSC with CdSe sensitized electrode prepared using 7 cycles of successive ionic layer adsorption and reaction (SILAR) produces an efficiency of 1.41% with a fill factor of 44% on using a polysulfide electrolyte of 0.5 M Na2S, 0.1 M S, and 0.05 M GuSCN in ethanol/water (8 : 2 by volume) under the illumination of 100 mW/cm2white light. Inclusion of small amount of TiO2nanoparticles into the electrolyte helps to stabilize the polysulfide electrolyte and thereby improve the stability of the CdSe QDSSC. The CdSe QDs are also found to be stable in the optimized polysulfide liquid electrolyte.


2016 ◽  
Vol 4 (37) ◽  
pp. 14194-14203 ◽  
Author(s):  
Huiyun Wei ◽  
Guoshuai Wang ◽  
Jiangjian Shi ◽  
Huijue Wu ◽  
Yanhong Luo ◽  
...  

Fumed SiO2 nanoparticles have been used as a polysulfide electrolyte additive for improving the performance of CdSexTe1−x QDSCs.


2016 ◽  
Vol 4 (29) ◽  
pp. 11416-11421 ◽  
Author(s):  
Guocan Jiang ◽  
Zhenxiao Pan ◽  
Zhenwei Ren ◽  
Jun Du ◽  
Cheng Yang ◽  
...  

Poly(vinyl pyrrolidone) (PVP) was used as a superior and general additive to modify the traditional polysulfide electrolyte in quantum dot sensitized solar cells and the photovoltaic performance of the constructed solar cells was significantly improved benefiting from the reduced charge recombination.


2015 ◽  
Vol 3 (33) ◽  
pp. 17091-17097 ◽  
Author(s):  
Jun Du ◽  
Xinxin Meng ◽  
Ke Zhao ◽  
Yan Li ◽  
Xinhua Zhong

The parasitic charge recombination processes between TiO2/QDs/electrolyte interfaces were effectively suppressed with the addition of polyethylene glycol (PEG) additive in polysulfide electrolyte, giving enhancement of PCE from 5.80% to 6.74% in the corresponding cell devices.


Author(s):  
Yuki Kawashima ◽  
Kousuke Yamamoto ◽  
Muneharu Sato ◽  
Kenta Nakahara ◽  
Takeaki Matsunaga ◽  
...  

2016 ◽  
Vol 16 (5) ◽  
pp. 4875-4879 ◽  
Author(s):  
Hyunwoong Seo ◽  
Daiki Ichida ◽  
Shinji Hashimoto ◽  
Naho Itagaki ◽  
Kazunori Koga ◽  
...  

2013 ◽  
Vol 92 ◽  
pp. 117-123 ◽  
Author(s):  
Hong-Yan Chen ◽  
Ling Lin ◽  
Xiao-Yun Yu ◽  
Kang-Qiang Qiu ◽  
Xian-Yong Lü ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document