Tin indium oxide/graphene nanosheet nanocomposite as an anode material for lithium ion batteries with enhanced lithium storage capacity and rate capability

2013 ◽  
Vol 91 ◽  
pp. 275-281 ◽  
Author(s):  
Hongxun Yang ◽  
Taeseup Song ◽  
Sangkyu Lee ◽  
Hyungkyu Han ◽  
Fan Xia ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Indium Oxide ◽  
Storage Capacity ◽  
Rate Capability ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Graphene Nanosheet

Template-free formation of one-dimensional mesoporous ZnMn2O4 tube-in-tube nanofibers towards Lithium-ion batteries as anode materials

CrystEngComm ◽  
2021 ◽  
Author(s):  
Jinxuan Wei ◽  
Senyang Xu ◽  
Zhaolin Tan ◽  
Linrui Hou ◽  
Changzhou Yuan
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Anode Materials ◽  
Storage Capacity ◽  
Lithium Ion ◽  
Oxidation Potential ◽  
Practical Application ◽  
Lithium Storage ◽  
One Dimensional ◽  
Template Free

Spinel ZnMn2O4 with high theoretical lithium storage capacity and appropriate oxidation potential has been regarded as a promising anode material for lithium-ion batteries (LIBs). However, its practical application is always...

Towards a durable high performance anode material for lithium storage: stabilizing N-doped carbon encapsulated FeS nanosheets with amorphous TiO2

2019 ◽  
Vol 7 (27) ◽  
pp. 16541-16552 ◽  
Author(s):  
Xuefang Xie ◽  
Yang Hu ◽  
Guozhao Fang ◽  
Xinxin Cao ◽  
Bo Yin ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Anode Materials ◽  
High Performance ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycling Stability ◽  
Lithium Storage ◽  
Amorphous Tio2

In situ formed hierarchical FeS nanosheets supported by a TiO2/C fibrous backbone exhibit higher rate capability and cycling stability as anode materials for lithium ion batteries.

Hydrothermal Synthesis of Fe3O4@C Spheres as Anode Material for Lithium-Ion Batteries

2018 ◽  
Vol 281 ◽  
pp. 801-806 ◽  
Author(s):  
Li Li ◽  
Zhi Hao Wang ◽  
Gao Xue Jiang
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Hydrothermal Reaction ◽  
Specific Capacity ◽  
Rate Capability ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Electrochemical Performances ◽  
Lithium Storage ◽  
Application Potential

Fe3O4@C spheres were synthesized by hydrothermal reaction at 190°C followed by a low temperature heat annealing at 600 °C and applied as an anode material for lithium-ion batteries. The samples were characterized by XRD and SEM. The electrochemical performances of as-synthesized Fe3O4@C were systemically investigated. A reversible capacity of 873 mAh g-1 is obtained in the second cycle at 400 mA g-1. More importantly, the discharge specific capacity can still maintain at about 767 mAh g-1 after 80 cycles. Moreover, Fe3O4@C spheres electrode shows satisfactory rate capability even at a rate up to 2000 mA g-1. Thus, the results demonstrate that Fe3O4@C spheres show encouraging application potential to be an advanced anode material for lithium storage

Co3O4/porous carbon nanofibers composite as anode for high-performance lithium ion batteries with improved cycle performance and lithium storage capacity

2016 ◽  
Vol 51 (3) ◽  
pp. 315-322 ◽  
Author(s):  
Hongxun Yang ◽  
Yang Wang ◽  
Yu Nie ◽  
Shengnan Sun ◽  
Tongyi Yang
Keyword(s):  
Lithium Ion Batteries ◽  
Carbon Nanofibers ◽  
Porous Carbon ◽  
Storage Capacity ◽  
Electronic Conductivity ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycle Performance ◽  
Lithium Storage ◽  
Capacity Retention

Co3O4 is a promising candidate as an anode material for the next generation lithium ion batteries because of its high theoretical storage capacity and energy density. However, the disadvantages of poor capacity retention caused by large volume changes during cycling and low rate capability due to its poor electronic conductivity frustrate its practical applications. We have developed a binary nanocomposite based on Co3O4 and porous carbon nanofibers synthesized via an electrospinning method followed by thermal treatment. As an anode for lithium ion batteries, the Co3O4/ porous carbon nanofibers composite exhibits a remarkably improved electrochemical performance in terms of lithium storage capacity (869.5 mAh g−1 at 0.1 C), high-initial Coulombic efficiency (73.8%), cycling stability (94.9% capacity retention at 50 cycles), and rate capability (403.6 mAh g−1 at 2 C at 25 cycles) compared to pure Co3O4. This improvement is attributed to the introduction of porous carbon nanofibers which could improve electrical conductivity of material and accommodate the volume expansion/contraction of Co3O4 nanoparticles during cycling.

Nanodiamonds: a critical component of anodes for high performance lithium-ion batteries

2016 ◽  
Vol 52 (69) ◽  
pp. 10497-10500 ◽  
Author(s):  
Yanpeng Song ◽  
Hongdong Li ◽  
Liying Wang ◽  
Dongchao Qiu ◽  
Yibo Ma ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
High Performance ◽  
Storage Capacity ◽  
Graphene Nanosheets ◽  
Lithium Ion ◽  
Cycling Performance ◽  
Detonation Nanodiamonds ◽  
Critical Component ◽  
Lithium Storage

Detonation nanodiamonds (DNDs) are deposited on graphene nanosheets (GNSs) to form a hybrid DND/GNS anode material for improving the performance of lithium ion batteries with a high lithium storage capacity and excellent cycling performance and stability.

Preparation of Nanoplatelet-Like MoS2/rGO Composite as High-Performance Anode Material for Lithium-Ion Batteries

NANO ◽  
2019 ◽  
Vol 14 (03) ◽  
pp. 1950033
Author(s):  
Shugang Pan ◽  
Ning Zhang ◽  
Yongsheng Fu
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
High Performance ◽  
Rate Capability ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Reduced Graphene ◽  
Initial Charge ◽  
Platelet Structure

In this paper, we report a facile strategy to design and prepare reduced graphene oxide (rGO) supported MoS2 nanoplatelet (MoS2/rGO) via a solvothermal co-assembly process. It is found that in the as-obtained MoS2/rGO nanocomposite, MoS2 possesses unique platelet structure and rGO is exfoliated due to the in situ growth of MoS2 nanoplatelet, leading to a large specific surface area, facilitating rapid diffusion of lithium ions. The nanocomposite is used as a promising anode material for lithium-ion batteries and displays a high initial charge capacity (1382[Formula: see text]mA[Formula: see text]h[Formula: see text]g[Formula: see text]), excellent rate capability and cycling stability. The remarkable lithium storage performance of MoS2/rGO nanocomposite is mainly ascribed to the inherent nanostructure of the MoS2, and the synergistic effect between rGO nanosheets and MoS2 nanoplatelets.

scholarly journals Good lithium storage performance of Fe2SiO4 as an anode material for secondary lithium ion batteries

RSC Advances ◽  
2017 ◽  
Vol 7 (8) ◽  
pp. 4437-4443 ◽  
Author(s):  
Peisheng Guo ◽  
Chengxin Wang
Keyword(s):  
Electrochemical Properties ◽  
Lithium Ion Batteries ◽  
Anode Material ◽  
Specific Capacity ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycle Life ◽  
Lithium Storage ◽  
Half Cell ◽  
Storage Performance

The electrochemical properties of Fe2SiO4 particles were systematically investigated and our results proved that fayalite presents great specific capacity, superior rate capability and long battery cycle life when tested in the form of a half-cell.

A SnO2@carbon nanocluster anode material with superior cyclability and rate capability for lithium-ion batteries

Nanoscale ◽  
2013 ◽  
Vol 5 (8) ◽  
pp. 3298 ◽  
Author(s):  
Min He ◽  
Lixia Yuan ◽  
Xianluo Hu ◽  
Wuxing Zhang ◽  
Jie Shu ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Rate Capability ◽  
Lithium Ion

Efficient lithium storage from modified vertically aligned carbon nanotubes with open-ends

RSC Advances ◽  
2015 ◽  
Vol 5 (84) ◽  
pp. 68875-68880 ◽  
Author(s):  
Hyun Young Jung ◽  
Sanghyun Hong ◽  
Ami Yu ◽  
Sung Mi Jung ◽  
Sun Kyoung Jeoung ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Lithium Ion Batteries ◽  
Anode Material ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Vertically Aligned Carbon Nanotubes ◽  
Structure And Morphology ◽  
Aligned Carbon Nanotubes ◽  
Vertically Aligned ◽  
Controlled Structure

Herein, we report the use of vertically aligned carbon nanotubes (VA-CNTs) with controlled structure and morphology as an anode material for lithium-ion batteries.

Sign in / Sign up

Export Citation Format

Share Document