Proton exchange membrane with hydrophilic capillaries for elevated temperature PEM fuel cells

2009 ◽  
Vol 11 (1) ◽  
pp. 71-74 ◽  
Author(s):  
Xue-Min Yan ◽  
Ping Mei ◽  
Yuanzhu Mi ◽  
Lin Gao ◽  
Shaoxiong Qin
Keyword(s):  
Fuel Cells ◽  
Elevated Temperature ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Exchange Membrane

Synergien zwischen Batterie- und Brennstoffzellen/Synergies between battery and fuel cells - Evaluation based on structural and machine parameters in production processes

2020 ◽  
Vol 110 (10) ◽  
pp. 735-741
Author(s):  
Jens Schäfer ◽  
Hannes Wilhelm Weinmann ◽  
Dominik Mayer ◽  
Tobias Storz ◽  
Janna Hofmann ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Manufacturing Industries ◽  
Sich Eine ◽  
Future Technology ◽  
The Past ◽  
Production Processes ◽  
Exchange Membrane

Nach Ankündigung diverser batterieelektrischer Modelle wird auch die PEM (Proton Exchange Membrane)-Brennstoffzelle als mögliche Zukunftstechnologie im Last- und Linienverkehr diskutiert. Ob und wann sich eine Technologie durchsetzt, hängt von der verwendeten Produktionstechnik ab, denn diese bestimmt Stückzahlen und resultierende Kosten. Die Vergangenheit zeigt, dass sich produzierende Industrien oft entlang vorhandener Kompetenzen in etablierten Bereichen entwickelt haben. In diesem Beitrag sollen daher Synergiepotenziale zwischen der Batterie- und Brennstoffzellenfertigung diskutiert werden.   Following the announcement of various battery electric models, PEM fuel cells are also discussed as a future technology in truck and line traffic. Whether and when a technology will be generally accepted depends largely on the production technology used, as this determines the number of units and the resulting costs. The past has shown that manufacturing industries have often developed along existing competencies in established areas. This article will therefore discuss the potential synergies between battery and fuel cell production.

Influence of the rated power in the performance of different proton exchange membrane (PEM) fuel cells

Energy ◽  
2010 ◽  
Vol 35 (5) ◽  
pp. 1898-1907 ◽  
Author(s):  
J.I. San Martin ◽  
I. Zamora ◽  
J.J. San Martin ◽  
V. Aperribay ◽  
E. Torres ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Exchange Membrane

Oxidised Carbon Nanofibers as Platinum Support for Proton Exchange Membrane (PEM) Fuel Cells

2008 ◽  
Vol 6 (6) ◽  
pp. 1059-1067 ◽  
Author(s):  
R. Moliner ◽  
M. J. Lázaro ◽  
L. Calvillo ◽  
D. Sebastián ◽  
Y. Echegoyen ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Carbon Nanofibers ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Exchange Membrane

Component Failure Analysis From the U.S. Army ERDC-CERL Residential Proton Exchange Membrane Fuel Cells Demonstration

2006 ◽  
Author(s):  
Scott A. Kenner ◽  
Nicholas M. Josefik ◽  
Scott M. Lux ◽  
James L. Knight ◽  
Melissa K. White ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Fuel Cell Stack ◽  
The Mean ◽  
Exchange Membrane ◽  
Mean Time ◽  
The U.S

Background: The U.S. Army Engineer Research and Development Center, Construction Engineering Research Laboratory (ERDC-CERL) continues to manage The Department of Defense (DoD) Residential Proton Exchange Membrane (PEM) Fuel Cell Demonstration Project. This project was funded by the United States Congress for fiscal years 2001 through 2004. A fleet of 91 residential-scale PEM fuel cells, ranging in size from 1 to 5 kW, has been demonstrated at various U.S. DoD facilities around the world. Approach: The performance of the fuel cells has been monitored over a 12-month field demonstration period. A detailed analysis has been performed cataloging the component failures, investigating the mean time of the failures, and the mean time between failures. A discussion of the lifespan and failure modes of selected fuel cell components, based on component type, age, and usage will be provided. This analysis also addresses fuel cell stack life for both primary and back-up power systems. Several fuels were used throughout the demonstration, including natural gas, propane, and hydrogen. A distinction will be made on any variances in performance based on the input fuel stock. Summary: This analysis will provide an overview of the ERDC-CERL PEM demonstration fuel cell applications and the corresponding data from the field demonstrations. Special emphasis will be placed on the components, fuel cell stack life, and input fuel characteristics of the systems demonstrated.

Alloys that form conductive and passivating oxides for proton exchange membrane fuel cell bipolar plates

2004 ◽  
Vol 19 (6) ◽  
pp. 1723-1729 ◽  
Author(s):  
Neil Aukland ◽  
Abdellah Boudina ◽  
David S. Eddy ◽  
Joseph V. Mantese ◽  
Margarita P. Thompson ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Oxide Films ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Bipolar Plates ◽  
Concentrated Solutions ◽  
Exchange Membrane

During the operation of proton exchange membrane (PEM) fuel cells, a high-resistance oxide is often formed on the cathode surface of base metal bipolar plates. Over time, this corrosion mechanism leads to a drop in fuel cell efficiency and potentially to complete failure. To address this problem, we have developed alloys capable of forming oxides that are both conductive and chemically stable under PEM fuel cell operating conditions. Five alloys of titanium with tantalum or niobium were investigated. The oxides were formed on the alloys by cyclic voltammetry in solutions mimicking the cathode- and anode-side environment of a PEM fuel cell. The oxides of all tested alloys had lower surface resistance than the oxide of pure titanium. We also investigated the chemical durability of Ti–Nb and Ti–Ta alloys in more concentrated solutions beyond those typically found in PEM fuel cells. The oxide films formed on Ti–Nb and Ti–Ta alloys remained conductive and chemically stable in these concentrated solutions. The stability of the oxide films was evaluated; Ti alloys having 3% Ta and Nb were identified as potential candidates for bipolar plate materials.

Noncovalent Functionalization of Single Walled Carbon Nanotubes Using Alternate Layer-By-Layer Polyelectrolyte Adsorption for Nanocomposite Fuel Cell Electrodes

2004 ◽  
Vol 837 ◽  
Author(s):  
R. B. Dhullipudi ◽  
T. A. Dobbins ◽  
S.R. Adiddela ◽  
Z. Zheng ◽  
R. A. Gunasekaran ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Fuel Cells ◽  
Proton Exchange Membrane ◽  
Single Walled Carbon Nanotubes ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Layer By Layer ◽  
Single Walled Carbon ◽  
Exchange Membrane ◽  
Walled Carbon Nanotubes

ABSTRACTElectrodes which are resistant to chemical poisoning by CO, S, and other fuel impurities are needed to replace Pt in proton exchange membrane (PEM) fuel cells. We have designed composite electrodes comprised of single walled carbon nanotubes (CNTs) within a conducting polymer matrix. A method for solubilizing single-walled carbon nanotubes (CNTs) in aqueous media using polyelectrolyte layer-by-layer (LbL) nanoassembly of polystyrene sulfonate (PSS) and polyallylamine (PAH) at the CNT surface is elucidated. Once soluble, the CNTs were assembled onto planar substrates using alternate LbL nanoassembly to form nanocomposite films. These films will later be tested for their potential as alternative anodes in proton exchange membrane fuel cells.

Sign in / Sign up

Export Citation Format

Share Document