Vibration of FG-CNT and FG-GNP Sandwich Composite Coupled Conical-Cylindrical-Conical Shell

2021 ◽  
pp. 114281
Author(s):  
Emad Sobhani ◽  
Amir R. Masoodi ◽  
Amirreza Ahmadi-Pari
Keyword(s):  
Conical Shell ◽  
Sandwich Composite

ANALYSIS OF THE INFLUENCE OF DIMENSIONS OF THE ROPE MIDWATER TRAWLS ON THEIR PERFORMANCE SUBJECT TO GEOMETRIC PROPERTIES OF CONE SHELLS

2017 ◽  
pp. 25-33
Author(s):  
Alexander Vasilievich Dvernik
Keyword(s):  
Surface Properties ◽  
Conical Shell ◽  
Side Surface ◽  
Theoretic Analysis ◽  
Good Convergence ◽  
Large Size ◽  
Quality Coefficient ◽  
Geometric Quality ◽  
The Relationship ◽  
Parameters Calculation

The article studies different shell constructions of mid-water trawls and their properties. The problem settled is suggested to be solved taking into account real geometric interrelations between spacious and surface properties of cone shells. The author suggests to accept a so-called geometric quality coefficient as a criterion of the properties of a conical shell, which represents the ratio of the shell to the area of its side surface and by analogy to use it to the shell of the trawl. The relationship between the trawl dimensions and geometric quality coefficient have been studied. Comparing these figures with the actual characteristics of trawls showed good convergence. According to the results of theoretic analysis and parameters calculation, trawl large-size shells will always have advantages in geometric characteristics over mid-size and, especially, small-size shells. The results of the analysis can be used for approximate calculations of the parameters of the trawl and justification of ways to improve the performance of existing mid-water trawls.

Effect of water absorption on the flexural strength of a green sandwich composite

2019 ◽  
Vol 61 (4) ◽  
pp. 369-375
Author(s):  
Sivalingam Prabhakaran ◽  
Vijayan Krishnaraj ◽  
Mouleeswaran Senthilkumar ◽  
Redouane Zitoune ◽  
Krishna Shankar
Keyword(s):  
Flexural Strength ◽  
Water Absorption ◽  
Sandwich Composite ◽  
Effect Of Water

Suivi par émission acoustique de structure sandwich composite/nid d’abeille lors de sollicitation en flexion 3 points. Analyse de la dynamique des précurseurs de la rupture

2014 ◽  
Vol 24 (4) ◽  
pp. 393-402
Author(s):  
Julien Bernard ◽  
François-Xavier Hanesse ◽  
Nathalie Godin ◽  
Pascal Reynaud ◽  
Mohamed R'Mili ◽  
...  
Keyword(s):  
Sandwich Composite ◽  
Emission Acoustique

Investigation of the Static Behavior and Failure Mechanisms of a 3D Printed Bio-Based Sandwich with Auxetic Core

2020 ◽  
Vol 12 (05) ◽  
pp. 2050051
Author(s):  
Khawla Essassi ◽  
Jean-Luc Rebiere ◽  
Abderrahim El Mahi ◽  
Mohamed Amine Ben Souf ◽  
Anas Bouguecha ◽  
...  
Keyword(s):  
Failure Mechanisms ◽  
Three Dimensional ◽  
Acoustic Emissions ◽  
Shear Stiffness ◽  
Tensile Tests ◽  
Sandwich Composite ◽  
Static Behavior ◽  
Flax Fibers ◽  
Data Points ◽  
3D Printed

In this research contribution, the static behavior and failure mechanisms are developed for a three-dimensional (3D) printed dogbone, auxetic structure and sandwich composite using acoustic emissions (AEs). The skins, core and whole sandwich are manufactured using the same bio-based material which is polylactic acid reinforced with micro-flax fibers. Tensile tests are conducted on the skins and the core while bending tests are conducted on the sandwich composite. Those tests are carried out on four different auxetic densities in order to investigate their effect on the mechanical and damage properties of the materials. To monitor the invisible damage and damage propagation, a highly sensitive AE testing method is used. It is found that the sandwich with high core density displays advanced mechanical properties in terms of bending stiffness, shear stiffness, facing bending stress and core shear stress. In addition, the AE data points during testing present an amplitude range of 40–85[Formula: see text]dB that characterizes visible and invisible damage up to failure.

Wear behaviour of foam and fiber based sandwich composite – A review

2021 ◽  
Author(s):  
K. Alagarraja ◽  
B. Vijaya Ramnath ◽  
A. Rajendra Prasad ◽  
E. Naveen ◽  
N. Ramanan
Keyword(s):  
Sandwich Composite ◽  
Wear Behaviour

Stability and vibration analysis of an axially moving thin walled conical shell

2021 ◽  
pp. 107754632199760
Author(s):  
Hossein Abolhassanpour ◽  
Faramarz Ashenai Ghasemi ◽  
Majid Shahgholi ◽  
Arash Mohamadi
Keyword(s):  
Natural Frequency ◽  
Conical Shell ◽  
Shell Theory ◽  
Cone Angle ◽  
Theory Of Elasticity ◽  
Lower Velocity ◽  
Motion Equations ◽  
Conical Shells ◽  
Divergence Instability ◽  
Axially Moving

This article deals with the analysis of free vibration of an axially moving truncated conical shell. Based on the classical linear theory of elasticity, Donnell shell theory assumptions, Hamilton principle, and Galerkin method, the motion equations of axially moving truncated conical shells are derived. Then, the perturbation method is used to obtain the natural frequency of the system. One of the most important and controversial results in studies of axially moving structures is the velocity detection of critical points. Therefore, the effect of velocity on the creation of divergence instability is investigated. The other important goal in this study is to investigate the effect of the cone angle. As a novelty, our study found that increasing or decreasing the cone angle also affects the critical velocity of the structure in addition to changing the natural frequency, meaning that with increasing the cone angle, the instability occurs at a lower velocity. Also, the effect of other parameters such as aspect ratio and mechanical properties on the frequency and instability points is investigated.

scholarly journals Multiscale Characterization of E-Glass/Epoxy Composite Exposed to Extreme Environmental Conditions

2021 ◽  
Vol 5 (3) ◽  
pp. 80
Author(s):  
George Youssef ◽  
Scott Newacheck ◽  
Nha Uyen Huynh ◽  
Carlos Gamez
Keyword(s):  
Power Distribution ◽  
Epoxy Composite ◽  
Fire Retardant ◽  
Sandwich Composite ◽  
Dynamic Mechanical Analyzer ◽  
Fire Event ◽  
Balsa Wood ◽  
X Ray ◽  
Dynamic Mechanical ◽  
Composite Skins

Fiber-reinforced polymer matrix composites continue to attract scientific and industrial interest since they offer superior strength-, stiffness-, and toughness-to-weight ratios. The research herein characterizes two sets of E-Glass/Epoxy composite skins: stressed and unstressed. The stressed samples were previously installed in an underground power distribution vault and were exposed to fire while the unstressed composite skins were newly fabricated and never-deployed samples. The mechanical, morphological, and elemental composition of the samples were methodically studied using a dynamic mechanical analyzer, a scanning electron microscope (SEM), and an x-ray diffractometer, respectively. Sandwich composite panels consisting of E-glass/Epoxy skin and balsa wood core were originally received, and the balsa wood was removed before any further investigations. Skin-only specimens with dimensions of ~12.5 mm wide, ~70 mm long, and ~6 mm thick were tested in a Dynamic Mechanical Analyzer in a dual-cantilever beam configuration at 5 Hz and 10 Hz from room temperature to 210 °C. Micrographic analysis using the SEM indicated a slight change in morphology due to the fire event but confirmed the effectiveness of the fire-retardant agents in quickly suppressing the fire. Accompanying Fourier transform infrared and energy dispersive X-ray spectroscopy studies corroborated the mechanical and morphological results. Finally, X-ray diffraction showed that the fire event consumed the surface level fire-retardant and the structural attributes of the E-Glass/Epoxy remained mainly intact. The results suggest the panels can continue field deployment, even after short fire incident.

Sign in / Sign up

Export Citation Format

Share Document