Impact damage detection in CFRP and GFRP curved composite laminates subjected to low-velocity impacts

2020 ◽  
pp. 113278
Author(s):  
Sajjad Seifoori ◽  
Ahmad Mahdian Parrany ◽  
S. Mirzarahmani
Keyword(s):  
Damage Detection ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity

Impact Damage Research of Sandwich Composite Laminates

2013 ◽  
Vol 710 ◽  
pp. 136-141
Author(s):  
Li Jun Wei ◽  
Fang Lue Huang ◽  
Hong Peng Li
Keyword(s):  
Compressive Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Sandwich Composite ◽  
Low Velocity ◽  
Compression Process ◽  
Velocity Impact ◽  
Residual Compressive Strength ◽  
Core Materials

Sandwich composite laminates structure is a classic application of composite material on actual aircraft structural. Dealing with low-velocity impact damage and residual compressive strength of sandwich composite laminates, explicit finite element method of ABAQUS/Explicit software was adopted to simulate low-velocity impact and compression process. Impact response and invalidation on compression between sandwich composite laminates with different core materials and regular composite laminates were compared. The simulation results indicated that softer core materials can absorb more impact energy, reduce the structure damage and enhance the residual compressive strength after impact.

Experimental investigation on a fully thermoplastic composite subjected to repeated impacts

2019 ◽  
Vol 233 (19-20) ◽  
pp. 6985-7002
Author(s):  
S Boria ◽  
A Scattina ◽  
G Belingardi
Keyword(s):  
Composite Laminates ◽  
Mechanical Performance ◽  
Impact Damage ◽  
Energy Levels ◽  
Thermoplastic Composite ◽  
Thermoplastic Composites ◽  
Low Velocity ◽  
Repeated Impacts ◽  
Structural Parts ◽  
The Impact

In the last years, the spread of composite laminates into the engineering sectors was observed; the main reason lies in higher values of strength/weight and stiffness/weight ratios with respect to conventional materials. Firstly, the attention was focused on fibres reinforced with thermosetting matrix. Then, the necessity to move towards low density and recyclable solutions has implied the development of composites made with thermoplastic matrix. Even if the first application of thermoplastic composites can be found into no structural parts, the replacement of metallic structural parts with such material in areas potentially subjected to impact has become worthy of investigation. Depending on the field of application and on the design geometry, in fact, some components can be subjected to repeated impacts at localized sites either during fabrication, activities of routine maintenance or during service conditions. When composite material was adopted, even though the impact damage associated to the single impact event can be slight, the accumulation of the damage over time may seriously weaken the mechanical performance of the structure. In this overview, the capability of energy absorption of a new composite completely made of thermoplastic material was investigated. This material was able to combine two conflicting requirements: the recyclability and the lightweight. In particular, repeated impacts at low velocity, on self-reinforced laminates made of polypropylene (PP), were conducted by experimental drop dart tests. Repeated impacts up to the perforation or up to 40 times were performed. In the analysis, three different energy levels and three different values of the laminate thicknesses were considered in order to analyse the damage behaviour under various experimental configurations. A visual observation of the impacted specimens was done, in order to evaluate the damage progression. Moreover, the trend of the peak force interchanged between specimen and dart and the evolution of both the absorbed energy and of the bending stiffness with the impacts number were studied. The results pointed out that the maximum load and the stiffness of the specimens tended to grow increasing the number of the repeated impacts. Such trend is opposite compared to the previous results obtained by other researchers using thermosetting composites.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects

2005 ◽  
Vol 297-300 ◽  
pp. 1303-1308 ◽  
Author(s):  
Jae Hoon Kim ◽  
Duck Hoi Kim ◽  
Hu Shik Kim ◽  
Byoung Jun Park
Keyword(s):  
Compressive Strength ◽  
Environmental Effects ◽  
Impact Loading ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
The Impact ◽  
Phenolic Composite

The objectives of this study are to evaluate the internal damage and compressive residual strength of composite laminate by impact loading. To investigate the environmental effects, as-received and accelerated-aged glass/phenolic laminates are used. UT C-Scan is used to determine the impact damage characteristics and CAI tests are carried out to evaluate quantitatively the reduction of compressive strength by impact loading. The damage modes of the woven glass/phenolic laminates are evaluated. In the case of the accelerated-aged laminates, as aging time increases, initial failure energy and residual compressive strength decrease.

Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates

2014 ◽  
Vol 566 ◽  
pp. 463-467
Author(s):  
Pu Xue ◽  
H.H. Chen ◽  
W. Guo
Keyword(s):  
Experimental Data ◽  
Residual Strength ◽  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Numerical Results ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

This paper studies the impact damage under low velocity impact for composite laminates based on a nonlinear progressive damage model. Damage evolution is described by the framework of the continuum damage mechanics. The real impact damage status of composite laminates has been used to analyze the residual compressive strength instead of assumptions on damage area after impact. The validity of the methodologies has been demonstrated by comparing the numerical results with the experimental data available in literature. The delamination area has an error of 11.3%. The errors of residual strength and compressive displacement are 8.9% and 15%, which indicate that the numerical results matched well with the experimental data.

scholarly journals Low Velocity Impact Damage in Composite Laminates Based on Waste Polyolefins

2014 ◽  
Vol 88 ◽  
pp. 165-172
Author(s):  
Pietro Russo ◽  
Giorgio Simeoli ◽  
Domenico Acierno ◽  
Valentina Lopresto
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact
Sign in / Sign up

Export Citation Format

Share Document