Quasi-static compression and hygrothermal stability of BMI/CE co-cured composite lattice cylindrical shell

2021 ◽  
Vol 257 ◽  
pp. 113130
Author(s):  
Shumao Li ◽  
Zixuan Chen ◽  
Yan Wang ◽  
Yudong Huang ◽  
Tao Yu
Keyword(s):  
Cylindrical Shell ◽  
Static Compression ◽  
Composite Lattice ◽  
Quasi Static Compression

Analysis of the compression behaviour of different composite lattice designs

2017 ◽  
Vol 52 (6) ◽  
pp. 715-729 ◽  
Author(s):  
R Umer ◽  
Z Barsoum ◽  
HZ Jishi ◽  
K Ushijima ◽  
WJ Cantwell
Keyword(s):  
Lattice Structure ◽  
Numerical Models ◽  
Fibre Volume ◽  
Lattice Structures ◽  
Compression Tests ◽  
Static Compression ◽  
Bcc Lattice ◽  
Compression Behaviour ◽  
Composite Lattice ◽  
Quasi Static Compression

Four all-composite lattice designs were produced using a lost-mould procedure that involved inserting carbon fibre tows through holes in a core. Following resin infusion and curing, samples were heated to melt the core, leaving well-defined lattice structures based on what are termed BCC, BCCz, FCC and F2BCC designs. Analytical and numerical models for predicting the mechanical properties of the four designs are presented and these results are compared with the experimental data from the quasi-static compression tests. Compression tests on the four lattice structures indicated that the F2BCC lattice offered the highest compression strength, although when normalized by relative density, the BCCz lattice structure out-performed other structures. Similarly, the specific compression strengths were found to be superior to those of more traditional core materials. A number of failure mechanisms were also highlighted, including strut buckling, fracture at the strut-skin joints and debonding of reinforcing members at the central nodes. Finally, it is believed that the properties of these lattices can be further increased using higher fibre volume fractions.

scholarly journals Analysis of the Strain and Stress Fields of Cardboard Box during Compression by 3D Digital Image Correlation

2010 ◽  
Vol 24-25 ◽  
pp. 103-108 ◽  
Author(s):  
Jeremie Viguié ◽  
P.J.J. Dumont ◽  
P. Vacher ◽  
Laurent Orgéas ◽  
I. Desloges ◽  
...  
Keyword(s):  
Compression Strength ◽  
Compressive Loading ◽  
Image Correlation ◽  
Parallel Plates ◽  
Static Compression ◽  
3D Digital Image Correlation ◽  
Plastic Materials ◽  
Semi Empirical ◽  
And Storage ◽  
Quasi Static Compression

Corrugated boards with small flutes appear as good alternatives to replace packaging folding boards or plastic materials due their small thickness, possibility of easy recycling and biodegradability. Boxes made up of these materials have to withstand significant compressive loading conditions during transport and storage. In order to evaluate their structural performance, the box compression test is the most currently performed experiment. It consists in compressing an empty container between two parallel plates at constant velocity. Usually it is observed that buckling phenomena are localized in the box panels, which bulge out during compression [1]. At the maximum recorded compression force, the deformation localises around the box corners where creases nucleate and propagate. This maximum force is defined as the quasi-static compression strength of the box. The prediction of such strength is the main topic of interest of past and current research works. For example, the box compression behaviour of boxes was studied by Mc Kee et al. [2] and Urbanik [3], who defined semi-empirical formula to predict the box compression strength, as well as by Beldie et al. [4] and Biancolini et al. [5] by finite element simulations. But comparisons of these models with experimental results remain rather scarce and limited.

Experimental and theoretical study of sandwich composites with Z-pins under quasi-static compression loading

2021 ◽  
pp. 136943322110073
Author(s):  
Erdem Selver ◽  
Gaye Kaya ◽  
Hussein Dalfi
Keyword(s):  
Vinyl Ester ◽  
Failure Modes ◽  
Critical Role ◽  
Sandwich Composites ◽  
Test Results ◽  
Compressive Properties ◽  
Element Analysis ◽  
Static Compression ◽  
Quasi Static Compression ◽  
Good Agreement

This study aims to enhance the compressive properties of sandwich composites containing extruded polystyrene (XPS) foam core and glass or carbon face materials by using carbon/vinyl ester and glass/vinyl ester composite Z-pins. The composite pins were inserted into foam cores at two different densities (15 and 30 mm). Compression test results showed that compressive strength, modulus and loads of the sandwich composites significantly increased after using composite Z-pins. Sandwich composites with 15 mm pin densities exhibited higher compressive properties than that of 30 mm pin densities. The pin type played a critical role whilst carbon pin reinforced sandwich composites had higher compressive properties compared to glass pin reinforced sandwich composites. Finite element analysis (FE) using Abaqus software has been established in this study to verify the experimental results. Experimental and numerical results based on the capabilities of the sandwich composites to capture the mechanical behaviour and the damage failure modes were conducted and showed a good agreement between them.

A NONLINEAR STRAIN-DEPENDENT VARIABLE-ORDER FRACTIONAL MODEL WITH APPLICATIONS TO ALUMINUM FOAMS

Fractals ◽  
2021 ◽  
Author(s):  
WEI CAI ◽  
PING WANG
Keyword(s):  
Power Law ◽  
Variable Order ◽  
Aluminum Foams ◽  
Static Compression ◽  
Fractional Model ◽  
Comparative Results ◽  
The Impact ◽  
Strain Responses ◽  
Strain Dependent ◽  
Quasi Static Compression

In this paper, a power-law strain-dependent variable order is first incorporated into the fractional constitutive model and employed to describe mechanical behaviors of aluminum foams under quasi-static compression and tension. Comparative results illustrate that power-law strain-dependent variable order is capable of better describing stress–strain responses compared with the traditional linear one. The evolution of fractional order along with the porosities or relative densities can be well qualitatively interpreted by its physical meaning. Furthermore, the model is also extended to characterize the impact behaviors under large constant strain rates. It is observed that fractional model with sinusoidal variable order agrees well with the experimental data of aluminum foams with impact and non-impact surfaces.

An Experimental Study on Dynamic Constitutive Relationship of 7075-T651 Aluminum Alloy

2013 ◽  
Vol 816-817 ◽  
pp. 84-89
Author(s):  
Yong Gang Kang ◽  
Yuan Yang ◽  
Jie Huang ◽  
Jing Hang Zhu
Keyword(s):  
Aluminum Alloy ◽  
Constitutive Equation ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Flow Behavior ◽  
Constitutive Relationship ◽  
Hopkinson Pressure Bar ◽  
Experiment Data ◽  
Static Compression ◽  
Quasi Static Compression

7075-T651 aluminum alloy are widely used in aeronautical applications such as wing panels, but there is no corresponding constitutive model for it now. In this paper, the flow behavior of 7050-T651 aluminum alloy was investigated by Split Hopkinson Pressure Bar (SHPB) and quasi-static compression experiment system. The strain hardening parameters were obtained by quasi-static compression experiment data, and the strain rate hardening parameters at various strain rates (1000-3000s-1) and room temperature, and the thermal softening parameter at various temperatures (20-300°C) where strain rate is 3000s-1 were obtained by SHPB experiment data. Then the constitutive equation of 7075-T651 aluminum alloy is obtained based on Johnson-Cook constitutive equation model.

scholarly journals Prediction of Crushing Response for Metal Hexagonal Honeycomb under Quasi-Static Loading

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Xinyu Geng ◽  
Yufei Liu ◽  
Wei Zheng ◽  
Yongbin Wang ◽  
Meng Li
Keyword(s):  
Mathematical Models ◽  
Static Loading ◽  
Theoretical Basis ◽  
Theoretical Models ◽  
Excellent Correlation ◽  
Static Compression ◽  
Out Of Plane ◽  
Plane Direction ◽  
Element Theory ◽  
Quasi Static Compression

To provide a theoretical basis for metal honeycombs used for buffering and crashworthy structures, this study investigated the out-of-plane crushing of metal hexagonal honeycombs with various cell specifications. The mathematical models of mean crushing stress and peak crushing stress for metal hexagonal honeycombs were predicted on the basis of simplified super element theory. The experimental study was carried out to check the accuracy of mathematical models and verify the effectiveness of the proposed approach. The presented theoretical models were compared with the results obtained from experiments on nine types of honeycombs under quasi-static compression loading in the out-of-plane direction. Excellent correlation has been observed between the theoretical and experimental results.

scholarly journals Compressive Property of an Auxetic-Knitted Composite Tube Under Quasi-Static Loading

2020 ◽  
Vol 20 (2) ◽  
pp. 101-109 ◽  
Author(s):  
Andrews Boakye ◽  
Rafui King Raji ◽  
Pibo Ma ◽  
Honglian Cong
Keyword(s):  
Energy Absorption ◽  
Compression Test ◽  
Impact Loading ◽  
Static Loading ◽  
Fiber Content ◽  
Compressive Property ◽  
Static Compression ◽  
Arrow Head ◽  
Composite Tube ◽  
Quasi Static Compression

AbstractThis research investigates the compressive property of a novel composite based on a weft-knitted auxetic tube subjected to a quasi-static compression test. In order to maximize the influence of the fiber content on the compression test, a Kevlar yarn was used in knitting the tubular samples using three different auxetic arrow-head structures (i.e. 4 × 4, 6 × 6 and 8 × 8 structure). A quasi-static compression test was conducted under two different impact loading speeds (i.e. 5 mm/min and 15 mm/min loading speed). The results indicate that the energy absorption (EA) property of the auxetic composite is highly influenced by the auxeticity of the knitted tubular fabric.

scholarly journals Investigation on the Thermal Behavior, Mechanical Properties and Reaction Characteristics of Al-PTFE Composites Enhanced by Ni Particle

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1741 ◽  
Author(s):  
Jiaxiang Wu ◽  
Huaixi Wang ◽  
Xiang Fang ◽  
Yuchun Li ◽  
Yiming Mao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Density ◽  
Thermal Behavior ◽  
Volume Fraction ◽  
Damage Effect ◽  
Static Compression ◽  
Hardening Modulus ◽  
Reaction Characteristics ◽  
Ptfe Composites ◽  
Quasi Static Compression

Al-PTFE (aluminum-polytetrafluoroethene) is regarded as one of the most promising reactive materials (RMs). In this work, Ni (Nickel) was added to Al-PTFE composites for the purpose of improving the energy density and damage effect. To investigate the thermal behavior, mechanical properties and reaction characteristics of the Al-Ni-PTFE composites, an Al-PTFE mixture and an Al-Ni mixture were prepared by ultrasonic mixing. Six types of Al-Ni-PTFE specimens with different component mass ratios were prepared by molding sintering. Simultaneous thermal analysis experiments were carried out to characterize the thermal behavior of the Al-PTFE mixture and the Al-Ni mixture. Quasi-static compression tests were performed to analyze the mechanical properties and reaction characteristics of the Al-Ni-PTFE specimens. The results indicate that the reaction onset temperature of Al-Ni (582.7 °C) was similar to that of Al-PTFE (587.6 °C) and that the reaction heat of Al-Ni (991.9 J/g) was 12.5 times higher than that of Al-PTFE (79.6 J/g). With the increase of Ni content, the material changed from ductile to brittle and the strain hardening modulus and compressive strength rose first and then subsequently decreased, reaching a maximum of 51.35 MPa and 111.41 MPa respectively when the volume fraction of Ni was 10%. An exothermic reaction occurred for the specimens with a Ni volume fraction no more than 10% under quasi-static compression, accompanied by the formation of Ni-Al intermetallic compounds. In the Al-Ni-PTFE system, the reaction between Al and PTFE preceded the reaction between Al and Ni and the feasibility of increasing the energy density and damage effect of the Al-Ni-PTFE reactive material by means of Ni-Al reaction was proved.

Quasi-static compression behavior and microstructure changes in low-cost AA6061 composites

2021 ◽  
pp. 095440622110553
Author(s):  
Hariharasakthisudhan P ◽  
Hariharasudhan T ◽  
Karthik S ◽  
Sathickbasha K ◽  
Surya Rajan B
Keyword(s):  
Aspect Ratio ◽  
Strain Hardening ◽  
Axial Strain ◽  
Low Cost ◽  
Research Work ◽  
Strain Hardening Exponent ◽  
Static Compression ◽  
Compression Behavior ◽  
Maximum Value ◽  
Quasi Static Compression

The workability study of the composites enhances the understanding of the degree of plastic deformation that can be employed on it. The current research work highlights the response of the low-cost aluminum composites reinforced with exhausted alkaline battery powders under quasi-static compression. The effect of reinforcements and aspect ratio against the strain hardening exponent and strength coefficients were investigated. The microstructural changes after quasi-static compression were studied and related to the changes in the property of the composites. The composite with 6 wt.% of reinforcement showed the least amount of porosity as 1.2%. In most of the cases, the maximum value of average strain hardening exponent with respect to axial strain was noted in the composites with 6 wt. % of reinforcement. The lowest aspect ratio of 0.5 showed the maximum workability in the composites. The average strength coefficient was found to be maximum (308.58 MPa) in the composite with 2 wt.% reinforcement. The elongated grains and slip bands were observed in the microstructure of the compressed specimens.

Sign in / Sign up

Export Citation Format

Share Document