scholarly journals A highly efficient prediction of delamination migration in laminated composites using the extended cohesive damage model

2017 ◽  
Vol 160 ◽  
pp. 712-721 ◽  
Author(s):  
X Li ◽  
J Chen
Keyword(s):  
Laminated Composites ◽  
Damage Model ◽  
Highly Efficient ◽  
Efficient Prediction ◽  
Cohesive Damage

Strengthening and Retrofitting Strategy for Masonry (New Build Construction in Indonesia)

2016 ◽  
Vol 845 ◽  
pp. 181-187 ◽  
Author(s):  
Gede Adi Susila ◽  
Parthasarati Mandal ◽  
Thomas Swailes
Keyword(s):  
Material Properties ◽  
Numerical Models ◽  
Load Capacity ◽  
Damage Model ◽  
Urban Region ◽  
Seismic Load ◽  
Crystalline Plasticity ◽  
Load Displacement ◽  
Cohesive Damage

In Indonesia, number of non-engineered structures have significantly been found which the houses were built by unskilled workers using masonry either unconfined or confined. The non-engineered housing units developed in urban region are also vulnerable to seismic hazard due to the use of low quality of material and constructions method. Those structures are not resistant to extreme lateral loads and their failure during an earthquake can lead to significant loss of life. This paper is concerned with the structural performance of Indonesian low-rise buildings made of masonry under lateral seismic load. Experimental testing of masonry has been carried out in Indonesia to establish the quality of materials and to provide material properties for numerical simulations. The results found that the strength of Indonesia-Bali clay brick masonry are below the minimum standard required for masonry structures built in seismic regions, being at least 50% lower than the requirement specified in British Standard and Eurocode-6 (BS EN 1996-1-1:2005). In general, structural tests under monotonic and cyclic loading have been conducted to determine the load-displacement capacity of local hand-made masonry wall panels in order to: (1) evaluate the performance of masonry structure, (2) investigate the dynamic behaviour of the structure, and (3) observe the effect of in-plane stiffness and ductility level. Detailed numerical models of the experimental specimens were simulated in Abaqus using three-dimensional solid elements. Cohesive elements were used to simulate the mortar behaviour, exhibiting cracking and the associated physical separation of the elements. A range of available material plasticity models were reviewed: Drucker-Prager, Crystalline Plasticity, and Cohesive Damage model. It was found that the combination of Crystalline Plasticity model for the brick unit and the Cohesive Damage model for the mortar is capable of simulating the experimental load-displacement behavour fairly accurately. The validated numerical models have been used to (1) predict the lateral load capacity, (2) determine the cracking load and patterns, (3) carry out a detailed parametric study by changing the geometric and material properties different to the experimental specimens. The numerical models were used to assess different strengthening measures such as using bamboo as reinforcement in the masonry walls which the performance of wall found to be better

Mode II Fracture Characterization of Pinus Pinaster Wood

2008 ◽  
Vol 587-588 ◽  
pp. 594-598
Author(s):  
Marcelo F.S.F. de Moura ◽  
M.A.L. Silva ◽  
J.J.L. Morais ◽  
A.B. de Morais ◽  
J.M.Q. Oliveira
Keyword(s):  
Crack Length ◽  
Pinus Pinaster ◽  
Process Zone ◽  
Damage Model ◽  
Crack Tip ◽  
Experimental Tests ◽  
Mode Ii ◽  
Fracture Characterization ◽  
Mode Ii Fracture ◽  
Cohesive Damage

This paper describes experimental and numerical studies on the application of the End Notched Flexure (ENF) and End Loaded Split (ELS) tests to mode II wood fracture characterization. In this context, ENF and ELS specimens were used to determine GIIc of a clear Pinus pinaster wood in the RL system, which is the most relevant for structural design. In mode II fracture tests the crack faces are in contact, thus hindering a rigorous visualization of the crack tip. This makes classic methodologies based on crack length measurement during experimental tests inadequate, since they induce significant errors on the mode II fracture properties. To overcome this experimental problem a Compliance Based Beam Method (CBBM) is used. This new data reduction scheme does not require crack length monitoring and includes the effect of the Fracture Process Zone (FPZ) ahead of crack tip. Furthermore, the clamped cross-section rotation of the ELS specimen is also taken into account. In the present work a numerical analysis considering a cohesive damage model was performed with a cohesive damage model in order to validate the application of the CBBM to the experimental results. The results confirmed the adequacy of the CBBM and the applicability of the ENF and ELS tests for mode II wood fracture characterization.

Sign in / Sign up

Export Citation Format

Share Document