Progressive failure analysis on scaled open-hole tensile composite laminates

2016 ◽  
Vol 150 ◽  
pp. 173-180 ◽  
Author(s):  
Hongchen Bao ◽  
Guangyan Liu
Keyword(s):  
Failure Analysis ◽  
Composite Laminates ◽  
Progressive Failure ◽  
Progressive Failure Analysis ◽  
Open Hole

scholarly journals Progressive Failure Analysis in Open-Hole Tensile Composite Laminates of Airplane Stringers Based on Tests and Simulations

2020 ◽  
Vol 11 (1) ◽  
pp. 185
Author(s):  
Jian Shi ◽  
Mingbo Tong ◽  
Chuwei Zhou ◽  
Congjie Ye ◽  
Xindong Wang
Keyword(s):  
Failure Analysis ◽  
Composite Laminates ◽  
Progressive Failure ◽  
Tensile Load ◽  
Fiber Failure ◽  
Stress Criterion ◽  
Progressive Failure Analysis ◽  
Analysis Technique ◽  
Open Hole ◽  
Failure Types

The failure types and ultimate loads for eight carbon-epoxy laminate specimens with a central circular hole subjected to tensile load were tested experimentally and simulated using two different progressive failure analysis (PFA) methodologies. The first model used a lamina level modeling based on the Hashin criterion and the Camanho stiffness degradation theory to predict the damage of the fiber and matrix. The second model implemented a micromechanical analysis technique coined the generalized method of cells (GMC), where the 3D Tsai–Hill failure criterion was used to govern matrix failure, and the fiber failure was dictated by the maximum stress criterion. The progressive failure methodology was implemented using the UMAT subroutine within the ABAQUS/implicit solver. Results of load versus displacement and failure types from the two different models were compared against experimental data for the open hole laminates subjected to tensile displacement load. The results obtained from the numerical simulation and experiments showed good agreement. Failure paths and accurate damage contours for the tested specimens were also predicted.

scholarly journals Open-Hole 3D Braided Composites Strength Prediction and Stress Analysis

2020 ◽  
Vol 38 (4) ◽  
pp. 889-896
Author(s):  
Shuangqiang Liang ◽  
Chenglong Zhang ◽  
Ge Chen ◽  
Qihong Zhou ◽  
Frank Ko
Keyword(s):  
Failure Analysis ◽  
Progressive Failure ◽  
Failure Criteria ◽  
Element Analysis ◽  
Braided Composite ◽  
Failure Initiation ◽  
Geometry Model ◽  
Progressive Failure Analysis ◽  
3D Braided Composites ◽  
Open Hole

The stress concentration caused by notches is a common engineering issue for composite structure application. 3D braided composite possess excellent damage tolerance compared to common laminates. The tensile properties of 3D braided composite with open-hole and un-notched were experimentally examined. The mechanic properties of 3D braided composite in other directions are predicted using FGM (Fabric Geometry Model) and finite element analysis. The stress distributions around the hole and perpendicular to the loading direction are analyzed based on Abaqus software. The simulation results were compared with Lekhnitskii's analytical study. The open-hole strength of 3D braided composite was predicted respectively using Average stress failure criteria, Point stress failure criteria (PSC), and also the progressive failure analysis based on different failure criteria. The predicted strength results were compared to the experimental values. The results show the PSC predicted strength matched the experiment, while the progressive failure analysis can predict the failure initiation, propagation and final failure mode.

scholarly journals Progressive failure analysis for impact damage and compressive strength of composite laminates

2017 ◽  
Vol 4 (5) ◽  
pp. 16-00710-16-00710 ◽  
Author(s):  
Yukihiro SATO ◽  
Kazuhiro MIURA ◽  
Masahiro KASHIWAGI ◽  
Masayoshi SUHARA ◽  
Yoshinori NONAKA ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Failure Analysis ◽  
Composite Laminates ◽  
Impact Damage ◽  
Progressive Failure ◽  
Progressive Failure Analysis

scholarly journals Progressive Failure Analysis of Laminates with Embedded Wrinkle Defects Based on an Elastoplastic Damage Model

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2422
Author(s):  
Zhi Hua Ning ◽  
Guan Liang Huo ◽  
Ren Huai Liu ◽  
Wei Lin Wu ◽  
Jia Ming Xie
Keyword(s):  
Failure Analysis ◽  
Composite Laminates ◽  
High Efficiency ◽  
Progressive Failure ◽  
Golden Section ◽  
Damage Model ◽  
Failure Behavior ◽  
Progressive Failure Analysis ◽  
Out Of Plane ◽  
Elastoplastic Damage

Out-of-plane wrinkling has a significant influence on the mechanical performance of composite laminates. Numerical simulations were conducted to investigate the progressive failure behavior of fiber-reinforced composite laminates with out-of-plane wrinkle defects subjected to axial compression. To describe the material degradation, a three-dimensional elastoplastic damage model with four damage modes (i.e., fiber tensile failure, matrix failure, fiber kinking/splitting, and delamination) was developed based on the LaRC05 criterion. To improve the computational efficiency in searching for the fracture angle in the matrix failure analysis, a high-efficiency and robust modified algorithm that combines the golden section search method with an inverse interpolation based on an existing study is proposed. The elastoplastic damage model was implemented in the finite-element code Abaqus using a user-defined material subroutine in Abaqus/Explicit. The model was applied to the progressive failure analysis of IM7/8552 composite laminates with out-of-plane wrinkles subjected to axial compressive loading. The numerical results showed that the compressive strength prediction obtained by the elastoplastic damage model is more accurate than that derived with an elastic damage model. The present model can describe the nonlinearity of the laminate during the damage evolution and determine the correct damage locations, which are in good agreement with experimental observations. Furthermore, it was discovered that the plasticity effects should not be neglected in laminates with low wrinkle levels.

Progressive failure analysis of fiber-reinforced laminated composites containing a hole

2017 ◽  
Vol 27 (7) ◽  
pp. 963-978 ◽  
Author(s):  
Hadi Bakhshan ◽  
Ali Afrouzian ◽  
Hamed Ahmadi ◽  
Mehrnoosh Taghavimehr
Keyword(s):  
Failure Analysis ◽  
Failure Modes ◽  
Progressive Failure ◽  
Composite Plates ◽  
Failure Criteria ◽  
Element Analysis ◽  
Progressive Failure Analysis ◽  
Numerical Predictions ◽  
Open Hole ◽  
Failure Loads

The present work aims to obtain failure loads for open-hole unidirectional composite plates under tensile loading. For this purpose, a user-defined material model in the finite element analysis package, ABAQUS, was developed to predict the failure load of the open-hole composite laminates using progressive failure analysis. Hashin and modified Yamanda-Sun’s failure criteria with complete and Camanho’s material degradation model are studied. In order to achieve the most accurate predictions, the influence of failure criteria and property degradation rules are investigated and failure loads and failure modes of the composites are compared with the same experimental test results from literature. A good agreement between experimental results and numerical predictions was observed.

Sign in / Sign up

Export Citation Format

Share Document