Multiscale finite element analysis of mode I delamination growth in a fabric composite

2015 ◽  
Vol 133 ◽  
pp. 157-165 ◽  
Author(s):  
Tadayoshi Yamanaka ◽  
Hossein Ghiasi ◽  
Mohammad Heidari-Rarani ◽  
Larry Lessard ◽  
Victor Feret ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mode I ◽  
Element Analysis ◽  
Delamination Growth ◽  
Fabric Composite ◽  
Multiscale Finite Element ◽  
Mode I Delamination

Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials

2017 ◽  
Vol 17 (2) ◽  
pp. 363-378 ◽  
Author(s):  
Ayad Arab Kakei ◽  
Mainul Islam ◽  
Jinsong Leng ◽  
Jayantha A Epaarachchi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Crack Front ◽  
Double Cantilever Beam ◽  
Bragg Grating ◽  
Mode I ◽  
Fibre Bragg Grating ◽  
Element Analysis ◽  
Plastic Model ◽  
Mode I Delamination

Mode I fracture analysis being employed to study delamination damage in fibre-reinforced composite structures under in-plane and out-of-plane load applications. However, due to the significantly low yield strength of the matrix material and the infinitesimal thickness of the interface matrix layer, the actual delamination process can be assumed as a partially plastic process (elasto-plastic). A simple elasto-plastic model based on the strain field in the vicinity of the crack front was developed for Mode I crack propagation. In this study, a double cantilever beam experiment has been performed to study the proposed process using a 0/90-glass woven cloth sample. A fibre Bragg grating sensor has embedded closer to the delamination to measure the strain at the vicinity of the crack front. Strain energy release rate was calculated according to ASTM D5528. The model predictions were comparable with the calculated values according to ASTM D5528. Subsequently, a finite element analysis on Abaqus was performed using ‘Cohesive Elements’ to study the proposed elasto-plastic behaviour. The finite element analysis results have shown a very good correlation with double cantilever beam experimental results, and therefore, it can be concluded that Mode I delamination process of an fibre-reinforced polymer composite can be monitored successfully using an integral approach of fibre Bragg grating sensors measurements and the prediction of a newly proposed elasto-plastic model for Mode I delamination process.

Double Cantilever Beam Measurement and Finite Element Analysis of Cryogenic Mode I Interlaminar Fracture Toughness of Glass-Cloth/Epoxy Laminates

2000 ◽  
Vol 123 (2) ◽  
pp. 191-197 ◽  
Author(s):  
Y. Shindo ◽  
K. Horiguchi ◽  
R. Wang ◽  
H. Kudo
Keyword(s):  
Fracture Toughness ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Cantilever Beam ◽  
Double Cantilever Beam ◽  
Mode I ◽  
Interlaminar Fracture Toughness ◽  
Element Analysis ◽  
Interlaminar Fracture ◽  
Delamination Crack

An experimental and analytical investigation in cryogenic Mode I interlaminar fracture behavior and toughness of SL-E woven glass-epoxy laminates was conducted. Double cantilever beam (DCB) tests were performed at room temperature (R.T.), liquid nitrogen temperature (77 K), and liquid helium temperature (4 K) to evaluate the effect of temperature and geometrical variations on the interlaminar fracture toughness. The fracture surfaces were examined by scanning electron microscopy to verify the fracture mechanisms. A finite element model was used to perform the delamination crack analysis. Critical load levels and the geometric and material properties of the test specimens were input data for the analysis which evaluated the Mode I energy release rate at the onset of delamination crack propagation. The results of the finite element analysis are utilized to supplement the experimental data.

Comparison of mixed mode fracture criteria in finite element analysis for matrix crack density estimation of laminated composites

2020 ◽  
Vol 55 (2) ◽  
pp. 277-289
Author(s):  
Mingqing Yuan ◽  
Haitao Zhao ◽  
Li Tian ◽  
Boming Zhang ◽  
Yanzhi Yang ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Density Estimation ◽  
Mixed Mode ◽  
Crack Density ◽  
Mode I ◽  
Mixed Mode Fracture ◽  
Fracture Criteria ◽  
Element Analysis ◽  
Mode Fracture

A mixed mode crack density estimation method based on the finite element analysis (FEA) for laminated composites is proposed and verified in this paper. The damaged properties of cracked ply are obtained using semi-analytical micro-mechanical method for the first time. The piecewise functions of the mode I and mode II energy release rates involving crack density are given based on Griffith’s energy principle and discrete damage mechanics (DDM). Any mixed mode fracture criteria could be simply applied to the FEA of the structure to calculate the initiation and evolution of the micro-cracks in the laminate. Mode I criterion, power law and B-K criterion are applied in the numerical examples to compare their performances in the crack density estimation. It has been concluded that the accuracy of the fracture toughness is more important than the choice of fracture criterion in crack density estimation.

scholarly journals Osteocyte lacunar strain determination using multiscale finite element analysis

Bone Reports ◽  
2020 ◽  
Vol 12 ◽  
pp. 100277 ◽  
Author(s):  
Sravan K. Kola ◽  
Mark T. Begonia ◽  
LeAnn M. Tiede-Lewis ◽  
Loretta E. Laughrey ◽  
Sarah L. Dallas ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Analysis ◽  
Multiscale Finite Element ◽  
Strain Determination ◽  
Osteocyte Lacunar
Sign in / Sign up

Export Citation Format

Share Document